That's hot. Beautiful rifle.
Added this to the heard last year, just got it scoped today and shot it for the first time. Bore sighted, and instantly on paper @ 200 yards.
Sako TRG M10, 300 Win Mag 190 grain Federal Gold Medal Match. Sweet rifle, added the Sako brake and I could stay on target 100% after each shot.
Ended up getting a bunch of barrels from Beretta during their 40% off sales, 338 LM, 300 WM, 308 and 6.5. Extra bolts too!
Sako TRG M10, 300 Win Mag 190 grain Federal Gold Medal Match. Sweet rifle, added the Sako brake and I could stay on target 100% after each shot.
Ended up getting a bunch of barrels from Beretta during their 40% off sales, 338 LM, 300 WM, 308 and 6.5. Extra bolts too!
Was doing barrel swaps last night. This action has worn some different stocks, chassis and scopes the past 4 years but this is the current configuration.
Bighorn TL3
26” PVA .223
18” PVA 6.5cm
XLR envy pro
Leupold mk5 HD
Hawkins Precision rings
Bighorn TL3
26” PVA .223
18” PVA 6.5cm
XLR envy pro
Leupold mk5 HD
Hawkins Precision rings
Attachments
My beginnings in Precision Shooting.
TC LRR in 6.5 Creedmoor
US Optics TS20X
Spuhr Ideal Mount
Atlas PRS Bipod w/Defy lever
MDT Vertical Grip
APW Muzzle Break
I plan to build another rifle later this summer and transfer most of the parts over using the MDT ACC chassis. Just not sure what caliber yet, might stay with 6.5cm since it’s so much fun.
TC LRR in 6.5 Creedmoor
US Optics TS20X
Spuhr Ideal Mount
Atlas PRS Bipod w/Defy lever
MDT Vertical Grip
APW Muzzle Break
I plan to build another rifle later this summer and transfer most of the parts over using the MDT ACC chassis. Just not sure what caliber yet, might stay with 6.5cm since it’s so much fun.
Attachments
.260 Ackley
Rem 700 modified by LRI
Shilen 1:8 4 groove ratchet 19” full length, 15” exposed, fluted by LRI
PVD coated action and barrel
AE30
XLR Envy Pro
Mini Pro ARCA plate
Warhorse Cleat bag
Atlas PSR
Flat TriggerTech Special
LaRue 20 MOA Extended rail
Spuhr 5006
Leupold Mk5 HD CCI
The AR is a .556 of course
Knight’s SR15 E3 14.5” 1:7 hammer forged barrel with custom AE mount
AEM5
SLR Adj gas block
Knight’s gas tube
Knight’s E3 bolt, firing pin, and cam
JP LMOS carrier
JP SCS H3
Ace SOCOM stock
Rock River form 4 lower
Hiperfire PDI flat bow
Aero upper
LMT ch
PRI tube
Atlas PSR
PRI Recon
Badger rings
Leupold Mk4 TMR w/ M5 mil turrets
Rem 700 modified by LRI
Shilen 1:8 4 groove ratchet 19” full length, 15” exposed, fluted by LRI
PVD coated action and barrel
AE30
XLR Envy Pro
Mini Pro ARCA plate
Warhorse Cleat bag
Atlas PSR
Flat TriggerTech Special
LaRue 20 MOA Extended rail
Spuhr 5006
Leupold Mk5 HD CCI
The AR is a .556 of course
Knight’s SR15 E3 14.5” 1:7 hammer forged barrel with custom AE mount
AEM5
SLR Adj gas block
Knight’s gas tube
Knight’s E3 bolt, firing pin, and cam
JP LMOS carrier
JP SCS H3
Ace SOCOM stock
Rock River form 4 lower
Hiperfire PDI flat bow
Aero upper
LMT ch
PRI tube
Atlas PSR
PRI Recon
Badger rings
Leupold Mk4 TMR w/ M5 mil turrets
Just got in my TS Customs full build and set it up. Range time next week!
- LP Fuzion
- Manners EH1A
- Benchmark 18” carbon chambered 6.5cm
- Kahles 318i SKMR3 / ARC rings
- TBAC Ultra 9
- LP Fuzion
- Manners EH1A
- Benchmark 18” carbon chambered 6.5cm
- Kahles 318i SKMR3 / ARC rings
- TBAC Ultra 9
The latest step in the evolution of this rifle.
Dang dude. I almost just want to see pictures of that pool room. Very classy.
6.5 Creedmoor
Cadex CDX-30 action
Tac30 chassis
Kreiger (#11) 1.25” straight 1:8” finished at 28”
Heathen 5 port brake
Timney CE trigger
Ergo grip
LRA Light Tactical bipod
NightForce NX8 4-32x50
Sphur SP-3602 (+20.6moa)
US Optics level
ARCA tripod mount
Last edited:
A few I changed up. I just picked the KAC up during my deployment the only one I have trigger time on is the Surgeon (Blue). The defiance just got a new scope. I have a CZ457 in the works due to a bad shoulder I wanted something with less recoil.
Baldwin Gun Works Defiance Deviant 6.5 24" Bartlein Barrel, Timney Trigger, Manners T6, Area 419 Rail, Area 419 Brake, Bushnell DMR Pro (Sold the Kahles)
Baldwin Gun Works Surgeon 223 24" Bartlein Barrel, Timney Triggers, Manners stock, Area 419 Rail, S&B PMII
Knights Armament ECR with Geissele Trigger NF NX8 4-32
CZ 457 Manners custom manners stock, Area 419 rail, Area 419 Scope mount, Bushnell DMR (At Baldwin Gun Works now)
Baldwin Gun Works Defiance Deviant 6.5 24" Bartlein Barrel, Timney Trigger, Manners T6, Area 419 Rail, Area 419 Brake, Bushnell DMR Pro (Sold the Kahles)
Baldwin Gun Works Surgeon 223 24" Bartlein Barrel, Timney Triggers, Manners stock, Area 419 Rail, S&B PMII
Knights Armament ECR with Geissele Trigger NF NX8 4-32
CZ 457 Manners custom manners stock, Area 419 rail, Area 419 Scope mount, Bushnell DMR (At Baldwin Gun Works now)
Attachments
Last edited:
Just a Tikka Tac A1. Nightforce 20MOA Unimount and a Vortex Viper PST Gen 2 5-25 for now. I'd like to upgrade the glass later, but it shoots very well for a factory rifle with factory ammo so I'm not in a hurry to swap it out. Atlas V8 Bipod. Completely factory rifle. It really likes the Sig 175's but so far its shot everything nearly as well as those, but they get the edge.
Attachments
Thanks! I won't be doing much else to it. I'd like to swap the bolt hand out for a swept back ball handle, and possibly get the bolt fluted. I'll also be putting a 0 angle grip on it, but functionally I'm very happy with it.
Well did a thing and decided to give 6GT a go... love how it looks in this stock. And itnis my first go with a Terminus
Congrats on the new rifle. What's that mount in front of the magazine? How is it attached?
Damn, thats a hell of a nice looking rifle! Who built the rifle for ya? I really dig that stock.
Area 419 spun the barrel and I bought the stock from them a year or so ago... and then a friend helped torque the barrel on. This is my first one based on a prefit.
Nice. I love Area 419's stuff. They're great. I didn't know they made stocks as well, good to know.
Ok, gotcha. I've been looking at a mesa precision in glacier for a Tikka CTR I've got. I like that camo pattern.
You built pretty much the same rifle I'm getting ready to build. Who did your barrel?
Nice. I’m going to have DST do mine. I can’t wait. Other than some color stuff yours is pretty much what Im about to build. How do you like the Zeus?
I have not shot this one yet... I have done some dry fire practice with it though. Hope to do load development soon. I will be shooting my 6.5 Creed tomorrow, to finish up its load development. I have a problem with having rifles built. I have another already in the works...
What I have on the phone.....minus a few.
Rifle: defiance rukus xm
284 win
Bartlien 1:9 25" light palma
Manners eh1
Trigger tech
Mdt mags
Silerco asr (still waiting on the can)
Pistol: rem xp100
338 lapua improved (Allen Xpress)
McMillan stock
Lilja 18" bbl Kirby Allen stalker contour
Don't know the brake
Both wear 3.5-15 NF nxs
Rifle: defiance rukus xm
284 win
Bartlien 1:9 25" light palma
Manners eh1
Trigger tech
Mdt mags
Silerco asr (still waiting on the can)
Pistol: rem xp100
338 lapua improved (Allen Xpress)
McMillan stock
Lilja 18" bbl Kirby Allen stalker contour
Don't know the brake
Both wear 3.5-15 NF nxs
Attachments
Beautiful weapon. Long been a fan of 16-18" barrelsHere is my latest addition to my collection .
Barrett 98B Tactical .308 with 16" barrel
Scope : Nightforce NXS 3.5-15x50 F1
Took it out for the first time today and it shoots great. Very soft shooting . Ergonomically , it fits me very well and has an exceptional trigger . The bolt lift is stiffer than my AI AW, but I am guessing it will get easier in a short time . It also weighs significantly less than my AIAW. The magazine is arguably better than the AIAW, I really think Barrett magazine is near the top of its class.
I replaced the stock Barrett muzzle brake with a Silencerco ASR muzzle brake as I will be running this rifle with a Silencerco Saker 7.62 ASR.
I traded a Colt/ Cooper M2012 for this rifle an I have no remorse whatsoever except that Euro Optic recently blew out some MRADs at heavy discount and I might have preferred an MRAD.
Sent from my iPad using Tapatalk
R700 308 22" 5R
MDT ESS
Timney CE 2-stage
S&B 5-25
EraTac mount
Atlas CAL
usually wears a Surefire can
I'd like to eventually upgrade the barrel/action.
Last edited:
You hurt my feelings!
It’s a ARC Nucleus in a modified XLR element with a barrel I chambered in 338 edge
More Manners Arctic camo, got the NRLH rifle dialed in today, 15.75-ish lbs, slinging factory Prime 6.5cm 144 smks at 2675, lololol
Ha ha ha, throw some details in with the pic next time! It looked like one but I couldn't make out the bolt to tell. It's a nice setup. 338 Edge is a wicked caliber. I live an hour from Defensive Edge in Rathdrum, he does good work there.
You hurt my feelings!
It’s a ARC Nucleus in a modified XLR element with a barrel I chambered in 338 edge
