New Cadex CDX 30, first time out with it. Put one of my Tangents on it, bore sighted, 3 rounds into 200 yard backstop. First groups on paper.
-
Having trouble using the site?
Contact support
My pair of Desert Tech,s....
Just got rid of the junk/problematic ZCO optics i had ......and fitted a pair of trusty/reliable S&B,s.... PMII 3-27 High Power and a PMII 5-25..
free image hosting
Just got rid of the junk/problematic ZCO optics i had ......and fitted a pair of trusty/reliable S&B,s.... PMII 3-27 High Power and a PMII 5-25..
free image hosting
How do you like those rings?I'll get this thread started again
26" Bartlein M24 .260Rem
Stiller TAC30
Murphy Precision 20MOA Scope Base
XLR Element Folding Chassis
Kampfeld Customs Brake
Jewel HVR 14oz
Vortex GenII 4.5-27x56 EBR-2C MRAD
Vortex PMR 0.92" 34mm Rings
Barrel and Scope Base cerakoted Snipers Grey
Action is melonite from factory
Patriot Valley Arms
26" Bartlein M24 6.5x47L
Bighorn TL3
Receiver DLC / Bolt NP3
XLR Element Folding Chassis
Jewel HVR 14oz
Rugged Suppressors 3 Port QD Brake
Vortex GenII 4.5-27x56 EBR-2C MRAD
Vortex PMR 1.26" 34mm Rings
New video... I know it's been a while, but had some family stuff come up and had to deal with...
What were the problems you had w ZCO and did they not resolve them to your satisfaction? Just curious.My pair of Desert Tech,s....
Just got rid of the junk/problematic ZCO optics i had ......and fitted a pair of trusty/reliable S&B,s.... PMII 3-27 High Power and a PMII 5-25..
free image hosting
2022 GAP PPR in 6GT
One of the 30 in their first batch PPR. Straight from the box ~14.5lb with their weighted rail similar to area419. Their GAP #8 contour is sure girthy, probably a bit bigger than MTU.
One of the 30 in their first batch PPR. Straight from the box ~14.5lb with their weighted rail similar to area419. Their GAP #8 contour is sure girthy, probably a bit bigger than MTU.
Attachments
Had 3 of the 5 fail with Parallax/Focus issues .... I returned all 5 to my dealer for a full refund. He also returned his entire stock to ZCO scopes until he can be assured the issue is actually corrected by ZCO.. .
I am NOT the only one to return scopes due to this issue..
Its a pleasure to go back to S&B ...as well as a confidence boost..
What did the shorty end up weighing? I'm tempted to build one that short for Coyotes
Always wanted to do a cerakote job that wasn't earth tone or camo...so I went with a Boba Fett theme
25" 25 Creed on a Mausingfield M7
135 Hybrids at 3000fps
March HighMaster 5-42x
25" 25 Creed on a Mausingfield M7
135 Hybrids at 3000fps
March HighMaster 5-42x
Picked this beauty up from SAC last friday.
6.5 Creedmoor
Defiance Ruckas Tactical action
26" Bartlein Barrel 1x7.5
MDT ACC chassis
Deadair keymo brake (still waiting on stamp)
TriggerTech Diamond set to 1lb
Nightforce 5-25 with an ARC single piece mount.
6.5 Creedmoor
Defiance Ruckas Tactical action
26" Bartlein Barrel 1x7.5
MDT ACC chassis
Deadair keymo brake (still waiting on stamp)
TriggerTech Diamond set to 1lb
Nightforce 5-25 with an ARC single piece mount.
Attachments
Last edited:
Well… You see… My local store had a 24” Christensen Arms Ridgeline in .280 Ackley Improved, and with the $350 rebate ending tomorrow (9/30/22), I couldn’t say no… 
I snatched a 20MOA EGW HD base off my custom .30-06 AI that I never shoot, and had this old Austrian/USA Zeiss Conquest 3-12x56 30mm FFP scope in a set of Seekins Precision low rings, just collecting dust, so, for now, this is how she’ll be. In the near future, I hope to put a new Kahles Helia 3.5-18x50i, or maybe something like a Razor or a nice hunting scope with exposed turrets (elevation at minimum).
I snatched a 20MOA EGW HD base off my custom .30-06 AI that I never shoot, and had this old Austrian/USA Zeiss Conquest 3-12x56 30mm FFP scope in a set of Seekins Precision low rings, just collecting dust, so, for now, this is how she’ll be. In the near future, I hope to put a new Kahles Helia 3.5-18x50i, or maybe something like a Razor or a nice hunting scope with exposed turrets (elevation at minimum).
Ok but your not going to like it!!! I added Fab Defense furniture, because I could.
It's a Nemo Omen 300 win mag. 24" Proof Research carbon barrel. With a Q muzzle brake adapter.
My Pierce 6.5x47L got put on a diet and I like it better now though another scope upgrade will likely occur.
Swapped the EH1 folder out for a new LRH and the Leupold for a P4xi 4-16.
Swapped the EH1 folder out for a new LRH and the Leupold for a P4xi 4-16.
That is the whole Butt stock, this butt stock has a lot of adjustment. Now there is a sling adapter on the bottom of that button stock but that is it.
Changed my setup from the XLR Element 4.0 Magnesium to the Envy Pro JV, decided to go from the NRL Hunter Lightweight open setup to the NRL Hunter Heavyweight open setup with a XLR Envy Pro with C6. The balance of this setup is amazing - Richard
Weight
XLR Element 4.0 Magnesium 11 pounds 11 ounces with bipod
XLR Envy Pro w/o weights as seen below 14 pounds 1.5 ounces with bipod
Since you have a question mark I’ll assume you’re asking a question. Not sure I understand your angle brother.
Tiger on stock.
6gt = 6 gay tiger in many people's minds. More of a funny than anything.
There were a few threads making fun of it when it came out.
The GAP Butthurt thread (formerly 6mm GT)
I'm definitely interested. The most helpful comment comes from Sheldon N. I posted it below to save you from having to scroll through strange tiger memes. Sheldon N. Seems a little more interesting to me seeing it side by side with Dasher and 6x47. Looks like a decent case design. If i were...
www.snipershide.com
Never seen such sorcery. Thanks for clarifying.Tiger on stock.
6gt = 6 gay tiger in many people's minds. More of a funny than anything.
There were a few threads making fun of it when it came out.
There were a few good memes as well.The GAP Butthurt thread (formerly 6mm GT)
I'm definitely interested. The most helpful comment comes from Sheldon N. I posted it below to save you from having to scroll through strange tiger memes. Sheldon N. Seems a little more interesting to me seeing it side by side with Dasher and 6x47. Looks like a decent case design. If i were...
View attachment 7971696
700P
1/11 Kreiger 26"
All trued up and installed by Jon (before he got famous
)at Area 419 Firearms. I actually did the bolt handle (Badger) myself. Took about 3 hours and 9 beers...
The Leupold patch was there before the Vortex....how about a patch Vortex?
YHM Phantom direct thread-also from Jon. The rifle is incredibly quiet. Anywho....the orange target is 1"X1" and fell when the third round took out the staple. So I held best I could on the bullet holes and kept rolling. Found the square when I walked back and placed it back up for reference. 100 yds. When that corn comes down I can go out to 4-500 yds. easily. Total round count is just over 1K. It shoots way better than this service rifle slut...
I feel like a poor posting these pictures after looking at some of the rifles....holy guacamole!
Good luck and good shooting!
First post with this group, excited to be a member! (Longtime reader, never contributor till now)
Wanted to give a huge shout out to Owen @Front Range Precision for helping me with this build & my endless questions!
Wanted to give a huge shout out to Owen @Front Range Precision for helping me with this build & my endless questions!
Attachments
Thank you! Went with the Silencerco Omega 300. Have a couple AR platforms for including 300blk. Really like it!
Nice. I have a Sandman K coming for my setup. I have an 8” 300blk as well.Thank you! Went with the Silencerco Omega 300. Have a couple AR platforms for including 300blk. Really like it!
Remington 700PCR 6.5 Creedmoor Heavy 5R 24" barrel
Nikon Black FX1000 6-24X50 FFP
Nikon Black 1 pc mount
Timney Calvin Elite trigger
Precision Armament M11 HD brake
Vortex flip caps and Vortex level
Elcheapo Caldwell bipod till I decide what I really want on there.
Nikon Black FX1000 6-24X50 FFP
Nikon Black 1 pc mount
Timney Calvin Elite trigger
Precision Armament M11 HD brake
Vortex flip caps and Vortex level
Elcheapo Caldwell bipod till I decide what I really want on there.
Remington 700 Short Action .223 - Bolt Fluted by smith
26" stainless modified M24 Contour Barrel - Fluted
McMillan A3 Stock, Adj LOP Spacer System, Adj Cheek - Moulded in Desert Camo
Trigger Tech Primary Trigger
Harris BRMS 6-9 Bipod
Nightforce 4-16x50 ATACR Mil-C reticle
Accuracy 1st Bubble Level (Tan)
Badger Bolt Knob
Badger 20 MOA Rail - 8x40 Screw Option
Badger EFR
Badger M5 Bottom metal
Badger M40A3 Scope Rings
26" stainless modified M24 Contour Barrel - Fluted
McMillan A3 Stock, Adj LOP Spacer System, Adj Cheek - Moulded in Desert Camo
Trigger Tech Primary Trigger
Harris BRMS 6-9 Bipod
Nightforce 4-16x50 ATACR Mil-C reticle
Accuracy 1st Bubble Level (Tan)
Badger Bolt Knob
Badger 20 MOA Rail - 8x40 Screw Option
Badger EFR
Badger M5 Bottom metal
Badger M40A3 Scope Rings
Last edited:
6 dasher
26” bartlein m24 1:7.5 twist
Defiance deviant
Hellfire brake
KRG X ray chassis
Triggertech Diamond
Razor Gen ii 4.5-27
ARC M Brace mount
Always fun to plink
Not sure which it is as I bought that rifle used. I'll look it up on some paper work I have.
Just checked my paper work, it only mentions the efr not the brand.
Last edited:
