Precision Rifles.....show em!!

[HenryTheAce]

Well, all set up now!!! Travis did a stellar job!!! Now to shoot it!

•TS Customs build
•Lone Peak Fuzion SS Nitride coated copper w/ TT Special Two-Stage
•Hawkins bottom metal w/ flush mag and offset lite rings coated copper
•Proof 22” Sendero 1:10tw chambered 300wsm
•TS Customs KS1A stock cracked copper ambush
•TBAC Dominus
•Tangent Theta TT315M Gen 2 Mildot

 

[BuLLet]

New Cadex CDX 30, first time out with it. Put one of my Tangents on it, bore sighted, 3 rounds into 200 yard backstop. First groups on paper.

 

[wooferocau]

My pair of Desert Tech,s....

Just got rid of the junk/problematic ZCO optics i had ......and fitted a pair of trusty/reliable S&B,s.... PMII 3-27 High Power and a PMII 5-25..









free image hosting

 

[Jruppert71]

I'll get this thread started again


26" Bartlein M24 .260Rem
Stiller TAC30
Murphy Precision 20MOA Scope Base
XLR Element Folding Chassis
Kampfeld Customs Brake
Jewel HVR 14oz
Vortex GenII 4.5-27x56 EBR-2C MRAD
Vortex PMR 0.92" 34mm Rings
Barrel and Scope Base cerakoted Snipers Grey
Action is melonite from factory

Patriot Valley Arms
26" Bartlein M24 6.5x47L
Bighorn TL3
Receiver DLC / Bolt NP3
XLR Element Folding Chassis
Jewel HVR 14oz
Rugged Suppressors 3 Port QD Brake
Vortex GenII 4.5-27x56 EBR-2C MRAD
Vortex PMR 1.26" 34mm Rings

How do you like those rings?

 

[FuhQ]

New video... I know it's been a while, but had some family stuff come up and had to deal with...

 

[Simia Dei]

 

[Hennig]

C4 arrived! Needs paint though.

 

[Baron23]

My pair of Desert Tech,s....

Just got rid of the junk/problematic ZCO optics i had ......and fitted a pair of trusty/reliable S&B,s.... PMII 3-27 High Power and a PMII 5-25..









free image hosting

What were the problems you had w ZCO and did they not resolve them to your satisfaction? Just curious.

 

[350z]

2022 GAP PPR in 6GT
One of the 30 in their first batch PPR. Straight from the box ~14.5lb with their weighted rail similar to area419. Their GAP #8 contour is sure girthy, probably a bit bigger than MTU.

 

[kthomas]

View attachment 7945383My Lord does Travis @ TS Customs puts out some work art. What a beauty!!! Should be getting it next week sometime.

•Lone Peak Fuzion SS Nitride coated in copper orange
•Proof Sendero 22” 1:10tw 300wsm copper orange ends
•TS Customs KS1 Adjustable stock in a black, od green, grey, light grey ambush w/ copper orange cracked lines
•Hawkins Precision bottom metal w/ hunter mag copper orange
• TT Special 2 stage

Will be putting a TT315M Gen 2 MilDot on top sitting in some copper orange coated Hawkins rings… a TBAC ODG Dominus will be hanging off the end.

Travis is the man. He does amazing work!

 

[wooferocau]

What were the problems you had w ZCO and did they not resolve them to your satisfaction? Just curious.

Had 3 of the 5 fail with Parallax/Focus issues .... I returned all 5 to my dealer for a full refund. He also returned his entire stock to ZCO scopes until he can be assured the issue is actually corrected by ZCO.. .

I am NOT the only one to return scopes due to this issue..

Its a pleasure to go back to S&B ...as well as a confidence boost..

 

[rynburns]

My Tac division rig, quickly becoming a favorite

Kelbly Atlas Tactical
26" .223
Manners PRS-TCS
Aeroknox Butterfly brake (because why not)
Timney Calvin Elite
Nightforce NXS 8-32 in the pic, but currently using a Bushnell XRS-2 in a BoBro SCAR mount

 

[Mareshow]

View attachment 7961233

What did the shorty end up weighing? I'm tempted to build one that short for Coyotes

 

[blksno]

Always wanted to do a cerakote job that wasn't earth tone or camo...so I went with a Boba Fett theme
25" 25 Creed on a Mausingfield M7
135 Hybrids at 3000fps
March HighMaster 5-42x

 

[Simia Dei]

What did the shorty end up weighing? I'm tempted to build one that short for Coyotes

NFI mate, I'll weigh it the next time I have it out.

 

[PizzaBox]

My 1st bolt gun. Spent way more than I wanted but I love it. M40A5

 

[Legacy2005]

Picked this beauty up from SAC last friday.

6.5 Creedmoor
Defiance Ruckas Tactical action
26" Bartlein Barrel 1x7.5
MDT ACC chassis
Deadair keymo brake (still waiting on stamp)
TriggerTech Diamond set to 1lb
Nightforce 5-25 with an ARC single piece mount.

 

[FuhQ]

Well… You see… My local store had a 24” Christensen Arms Ridgeline in .280 Ackley Improved, and with the $350 rebate ending tomorrow (9/30/22), I couldn’t say no…

I snatched a 20MOA EGW HD base off my custom .30-06 AI that I never shoot, and had this old Austrian/USA Zeiss Conquest 3-12x56 30mm FFP scope in a set of Seekins Precision low rings, just collecting dust, so, for now, this is how she’ll be. In the near future, I hope to put a new Kahles Helia 3.5-18x50i, or maybe something like a Razor or a nice hunting scope with exposed turrets (elevation at minimum).

 

[twissted]

Ok but your not going to like it!!! I added Fab Defense furniture, because I could.

 

[twissted]

Ok but your not going to like it!!! I added Fab Defense furniture, because I could.View attachment 7966692

It's a Nemo Omen 300 win mag. 24" Proof Research carbon barrel. With a Q muzzle brake adapter.

 

[MShort]

My Pierce 6.5x47L got put on a diet and I like it better now though another scope upgrade will likely occur.

Swapped the EH1 folder out for a new LRH and the Leupold for a P4xi 4-16.

 

[Cordova13]

 

[SWAZEMA1002]

My Savage 110 elite Precision in 6.5 creedmoor.

 

[HemiPowrd]

My Savage 110 elite Precision in 6.5 creedmoor.

Gotta ask, what is bolted to the bottom of the buttstock?

 

[SWAZEMA1002]

That is the whole Butt stock, this butt stock has a lot of adjustment. Now there is a sling adapter on the bottom of that button stock but that is it.

 

[CSTactical]

Zero Compromise Optic ZC527 5-27x56 M3X NLE
Hawkins Precision Heavy Tactical 1" rings
Impact Precision 737R
Bartlein Carbon Fiber M24 chambered in 6.5 Creedmoor and threaded by Rubicon Precision
MBM self timing Brake
XLR Industries Element 4.0 Magnesium with Carbon Fiber stock and grip
MDT magazines
Atlas Cal Bipod
Total weight just under 12 pounds with the bipod and no magazine
-Richard@CST


View attachment 7858920
View attachment 7858924
View attachment 7858926

Changed my setup from the XLR Element 4.0 Magnesium to the Envy Pro JV, decided to go from the NRL Hunter Lightweight open setup to the NRL Hunter Heavyweight open setup with a XLR Envy Pro with C6. The balance of this setup is amazing - Richard

Weight
XLR Element 4.0 Magnesium 11 pounds 11 ounces with bipod
XLR Envy Pro w/o weights as seen below 14 pounds 1.5 ounces with bipod

 

[HemiPowrd]

That is the whole Butt stock, this butt stock has a lot of adjustment. Now there is a sling adapter on the bottom of that button stock but that is it.

The sling adapter is what I was referring to, thanks!

 

[Sigmanx]

Savage 110 Tactical in 300 win mag. SWFA 12x42, SOLGW NOX (currently anyway), Magpul bipod. Currently testing 4 220gr hand loads.

 

[Styger]

 

[BuLLet]

You went gay tiger?

View attachment 7971601

 

[lethalsquirts]

 

[Styger]

You went gay tiger?

Since you have a question mark I’ll assume you’re asking a question. Not sure I understand your angle brother.

 

[stello1001]

Since you have a question mark I’ll assume you’re asking a question. Not sure I understand your angle brother.

He is asking what chamber you got...

 

[LeftyJason]

Since you have a question mark I’ll assume you’re asking a question. Not sure I understand your angle brother.

Tiger on stock.
6gt = 6 gay tiger in many people's minds. More of a funny than anything.
There were a few threads making fun of it when it came out.

The GAP Butthurt thread (formerly 6mm GT)

I'm definitely interested. The most helpful comment comes from Sheldon N. I posted it below to save you from having to scroll through strange tiger memes. Sheldon N. Seems a little more interesting to me seeing it side by side with Dasher and 6x47. Looks like a decent case design. If i were...

www.snipershide.com

There were a few good memes as well.

 

[Styger]

Tiger on stock.
6gt = 6 gay tiger in many people's minds. More of a funny than anything.
There were a few threads making fun of it when it came out.

The GAP Butthurt thread (formerly 6mm GT)

I'm definitely interested. The most helpful comment comes from Sheldon N. I posted it below to save you from having to scroll through strange tiger memes. Sheldon N. Seems a little more interesting to me seeing it side by side with Dasher and 6x47. Looks like a decent case design. If i were...

www.snipershide.com

There were a few good memes as well.
View attachment 7971696

Never seen such sorcery. Thanks for clarifying.

 

[Sirshredalot]

View attachment 7928735View attachment 7928734

What stock and action is this?
Please and thank you

 

[crispy]

 

[Douglas-001]

700P
1/11 Kreiger 26"
All trued up and installed by Jon (before he got famous)at Area 419 Firearms.
I actually did the bolt handle (Badger) myself. Took about 3 hours and 9 beers...
The Leupold patch was there before the Vortex....how about a patch Vortex?
YHM Phantom direct thread-also from Jon. The rifle is incredibly quiet. Anywho....the orange target is 1"X1" and fell when the third round took out the staple. So I held best I could on the bullet holes and kept rolling. Found the square when I walked back and placed it back up for reference. 100 yds. When that corn comes down I can go out to 4-500 yds. easily. Total round count is just over 1K. It shoots way better than this service rifle slut...
I feel like a poor posting these pictures after looking at some of the rifles....holy guacamole!
Good luck and good shooting!

 

[Kyle_LR83]

First post with this group, excited to be a member! (Longtime reader, never contributor till now)

Wanted to give a huge shout out to Owen @Front Range Precision for helping me with this build & my endless questions!

 

[Sigmanx]

First post with this group, excited to be a member! (Longtime reader, never contributor till now)

Wanted to give a huge shout out to Owen @Front Range Precision for helping me with this build & my endless questions!

Nice setup! Which can did you go with?

 

[Kyle_LR83]

Nice setup! Which can did you go with?

Thank you! Went with the Silencerco Omega 300. Have a couple AR platforms for including 300blk. Really like it!

 

[BuLLet]

Foundation stock, Defiance Action.

What stock and action is this?
Please and thank you

 

[Sigmanx]

Thank you! Went with the Silencerco Omega 300. Have a couple AR platforms for including 300blk. Really like it!

Nice. I have a Sandman K coming for my setup. I have an 8” 300blk as well.

 

[Goostoff]

Remington 700PCR 6.5 Creedmoor Heavy 5R 24" barrel
Nikon Black FX1000 6-24X50 FFP
Nikon Black 1 pc mount
Timney Calvin Elite trigger
Precision Armament M11 HD brake
Vortex flip caps and Vortex level
Elcheapo Caldwell bipod till I decide what I really want on there.

 

[Zigjib]

Remington 700 Short Action .223 - Bolt Fluted by smith
26" stainless modified M24 Contour Barrel - Fluted
McMillan A3 Stock, Adj LOP Spacer System, Adj Cheek - Moulded in Desert Camo
Trigger Tech Primary Trigger
Harris BRMS 6-9 Bipod
Nightforce 4-16x50 ATACR Mil-C reticle
Accuracy 1st Bubble Level (Tan)
Badger Bolt Knob
Badger 20 MOA Rail - 8x40 Screw Option
Badger EFR
Badger M5 Bottom metal
Badger M40A3 Scope Rings

 

[Kfive73]

6 dasher
26” bartlein m24 1:7.5 twist
Defiance deviant
Hellfire brake
KRG X ray chassis
Triggertech Diamond
Razor Gen ii 4.5-27
ARC M Brace mount

Always fun to plink

 

[Zigjib]

And a new to me GAP. Defiance Deviant Tactical, started out as a 6mm XC, now a 6mm Creedmoor. Manners PRS1 Saltwater, TT Diamond Flat, Night Bridge and Arca Rail.
View attachment 7894299

View attachment 7894300

View attachment 7894301

View attachment 7894302

View attachment 7894303

View attachment 7894304

View attachment 7894305

James on it.
View attachment 7894307

What Brand Nightvision bridge is this?

 

[BuLLet]

What Brand Nightvision bridge is this?

Not sure which it is as I bought that rifle used. I'll look it up on some paper work I have.

Just checked my paper work, it only mentions the efr not the brand.

 

[Zigjib]

Not sure which it is as I bought that rifle used. I'll look it up on some paper work I have.

Just checked my paper work, it only mentions the efr not the brand.

Thanks anyway bloke

 

[Flolito]

Voere X4 - 408 CT