Not sure if this is the perfect forum to post a photo I came across. Ukraine military snipers.
-
Having trouble using the site?
Contact support
Yesterday, south west Ireland. My trusty rem 700, hardy barrel carbon, PSE E-Tac4 stock and Schmidt PMII 5-25x56 Grid2
edi
edi
Seekins HIT last month siting waiting. (I'm hesitant to say "hunting" lol)
So that’s the coyote colored Scope Chap?Impact 737r
Bartlein 6GT
KRG C4
Tangent Theta Coyote
Area419 Maverick
TBAC bipod
How do you like that brake? I'm still looking for a brake for my 300PRC above.
TM6
It is my first muzzle brake, so take my thoughts for what they are worth.
I like it a lot.
The various YouTube videos explaining its design — wide so as to not throw up dust, straight ports to not concuss the shooter or drive the barrel down, are what really sold me. It is expensive, but I do not regret the purchase. It’s flatness made it very easy to time, and simple, as I dislike self-timing muzzle brakes.
Plus, it looks Barret-like cool.
-Stan
Last edited:
- OG JAE Chassis retrofitted w-3/4” kickeez grind to fit pad to reduce LOP (oops, this pic is before pad replacement) and MKM modified grip
- Defiance Machine Deviant Tactical medium (700 SA) action
- Bartlein MTU, .264, 400modbb, 8-7.5 LGT
- TT Diamond single stage Pro Curve
- ZCO 5-27 x 56 w 3X reticle
- ARC M-10 rings
- Chambered in 6.5 CM by Ern at Altus
- TBAC Ultra-7 suppressor
- BT Atlas CAL bipod
- Defiance Machine Deviant Tactical medium (700 SA) action
- Bartlein MTU, .264, 400modbb, 8-7.5 LGT
- TT Diamond single stage Pro Curve
- ZCO 5-27 x 56 w 3X reticle
- ARC M-10 rings
- Chambered in 6.5 CM by Ern at Altus
- TBAC Ultra-7 suppressor
- BT Atlas CAL bipod
Last edited:
The Hulk. I've got a lady painting the photo of Hulk with fists in the air.lol
300prc
Defiance Deviant GA Hunter
26” proof 1:9
AG Composites Alpine Hunter
Trigger Tech Special at 1.75#
Hawkins bottom metal
Muzzle Brakes and More CF 5 port (or a Gunwerks 8ight)
Seekins Rings
Leupold Mk5 (started with a 3.6-18 and now it has a 5-25illum.)
Defiance Deviant GA Hunter
26” proof 1:9
AG Composites Alpine Hunter
Trigger Tech Special at 1.75#
Hawkins bottom metal
Muzzle Brakes and More CF 5 port (or a Gunwerks 8ight)
Seekins Rings
Leupold Mk5 (started with a 3.6-18 and now it has a 5-25illum.)
Attachments
Returning back to the Hide after a long hiatus. Made some adjustments to the stable over the last year or so.
Rem 700 Tactical. 308, picked up up just like this without the Leup 4.5x14 LR.
Current setup after adding the Bravo and PST 3x15. I need to get my NV Bridge and new rings/mount already so I can get back to night hunting.
Definitely not ultra precision out of this RSI, but it shoots where I want it to with 175 SMK. I don't particularly care to shoot it, but man I sure do love hunting with it.
Last up for bolts would be my Rem 700 BDL in 7mag. With the fixed 6x it will shoot 139 Gr. American Whitetail into 3/4".
Rem 700 Tactical. 308, picked up up just like this without the Leup 4.5x14 LR.
Current setup after adding the Bravo and PST 3x15. I need to get my NV Bridge and new rings/mount already so I can get back to night hunting.
Definitely not ultra precision out of this RSI, but it shoots where I want it to with 175 SMK. I don't particularly care to shoot it, but man I sure do love hunting with it.
Last up for bolts would be my Rem 700 BDL in 7mag. With the fixed 6x it will shoot 139 Gr. American Whitetail into 3/4".
Attachments
Budget friendly-ish matching pair:
-T1x .22lr
-KRG Bravo
-Burris rings
-Area 419 30 MOA rail
-Vortex diamondback 6-24x50 FFP ebr2c moa reticle
-Elay trigger spring
-T3x CTR 6.5CM
-KRG Bravo
-Elay trigger spring
-scope and rings were moved to another rifle (on the hunt for another set that won’t break the bank but will get me back out there, any suggestions?)
-VG6 brake
Both on Caldwell bipods (well one is the other is setting on a cheap knock off but it works)
-T1x .22lr
-KRG Bravo
-Burris rings
-Area 419 30 MOA rail
-Vortex diamondback 6-24x50 FFP ebr2c moa reticle
-Elay trigger spring
-T3x CTR 6.5CM
-KRG Bravo
-Elay trigger spring
-scope and rings were moved to another rifle (on the hunt for another set that won’t break the bank but will get me back out there, any suggestions?)
-VG6 brake
Both on Caldwell bipods (well one is the other is setting on a cheap knock off but it works)
What clip-on do you plan on using with the 700? I too bought the bridge, but as of right now, it’s just an aesthetic touch. I looked at the PVS24 and PVS 30s and they’re around the same price, in favor of the 24 (along with being a pound lighter and higher FOM). but I’m a newb to NV.
I just have a CO-X MG from Armasight. Before that I had a PS28 WP from ATN.
The CO-X gets used 99% of the time on my AR because of ease in mounting. In the past I would have used a badger EFR or a coupler from scope to NV.
CO-X on Sig Cross 6.5.
ATN on EFR from a few years ago.
100 yards, indoor, bench, MagTech 147 grain 7.62x51 FMJ, three shots.
I am satisfied.
And, despite the party line, Howa 1500 + MDT ACC + Magpul AICS = no issues.
-Stan
Last edited:
Your after wet cleaning process
- @AmericanRifleCompany Mausingfield
- @proofresearch 1:8tw 6CM
- @impactprecisionshootingllc Heathen brake
- @trigger.tech Diamond
- @krg_ops C4 chassis
- @vortexoptics Gen2 Razor
- @masterpiecearms mount
- @btindllc Gen2 Cal
Am I too lazy to remove my insta tags? Yep.
- @proofresearch 1:8tw 6CM
- @impactprecisionshootingllc Heathen brake
- @trigger.tech Diamond
- @krg_ops C4 chassis
- @vortexoptics Gen2 Razor
- @masterpiecearms mount
- @btindllc Gen2 Cal
Am I too lazy to remove my insta tags? Yep.
Spartan Precision
Defiance Deviant Proof in 6.5CM
Defiance Deviant Proof in 6.5CM
Probably should have done that. Wettest day I’ve even been in the woods lolYour after wet cleaning process
Nice rifles. I’m curious what bottom metal you used in the Clymr and how the fitment process was. Did it require any machining?
The stock was ordered with a hawkins oberndorf inlet but I had Travis open it up to fit the M5 oberndorf from hawkins, so yeah it took some inletting, he had to mill out some of the mini chassis as well.
Apparently I am not keeping up with the times. Still like the old sticks
And here I thought I was daring too be different….
Also, does the Clymr come with a spot for an Arca rail or did that take some custom work? Thanks again for the info.
Our his and her's rifles to start our long range adventure on.
Yes those are. I bought them from True Velocity directly when I first saw them. I was very impressed with the technology and wanted to show support with a purchase. Given their cost I wouldn’t use them for anything really, more or less a collector’s item.Wait what?
Do I see plastic fantastic cases on there?
New video is up of my new Ruger American Ranch 16" .300 Blackout bolt-action rifle shooting my handload 220 subs, comparing my Dead Air Sandman-S MIL Contract to my Otter Creek Labs Hydrogen-S.
6mm Creedmoor Impact Precision. My PRS rig.
Damn… that’s one of the sexiest rifles I’ve seen in a minute.
This thread needs to be renamed. I vote for "Precision Rifle Porn - Must Be 18 or Over to Enter"
Now I need to learn how to shoot it! First full custom build. Huge thanks to Troy @ DST Precision for having almost all of it in stock.
Impact 737R
Proof 6.5CM comp contour 26”
PRS-TCS in Altus Orange/Gray
Bix’n’Andy TacSport Pro
Vortex SE (Razor G3 on the way)
Vortex PMR 1.1 rings
18.0 lbs unloaded w/Nomad Ti & wrap. Balances perfectly at the point where the tripod is set.
Last edited:
Top (my new toy): Christensen Arms Ridgeline FFT 20" 7mm-08 Rem, EGW HD 20MOA base, Arken EPL4 6-24x50 VHR MIL (temporary placeholder scope) in Arken HALO 30mm Low 0.82" rings. And my Dead Air Nomad-LT w/ Otter Creek Labs ZR0-DTA 5/8-24 DT mount & Rifles Only Gear/Dead Air HAD thermal wrap. Even setup like this, this gun is ridiculously lightweight...It feels like a toy.
Bottom: Christensen Arms Ridgeline 24" .280 Ackley Improved, Christensen Arms 20MOA base, Zeiss Conquest V4 6-24x50 ZMOA-1, in Seekins Precision 30mm Low 0.82" rings.
*** The 7mm-08 (top) will be getting the exact same Zeiss V4 scope setup as the rifle below it, i'm just waiting on it to show up in the mail. ***
Upgraded my PRS rig from a MPA BA Comp to a MPA Matrix Pro. It's a few pounds lighter and better balanced, even though I'll need a couple internal weights to get it balanced correctly. It won't need to get to 22 lb 4 oz to get properly balanced like with the BA Comp. Without mag and bipod its right at 18 lb 2.8 oz.
Bighorn (Zermatt) Origin
Bartlein 26 inch 1:7 5R heavy palma barrel chambered in 6mm Creedmoor by SPR
Triggertech Diamond flat, black trigger set at 8 oz
Vortex Razor HD Gen 2 4.5-27x56 mrad
MPA Matrix Pro in NRA blue
MPA BA scope mount 0 moa 1.125 high
American Precision Arms Little Bastard muzzle brake
MKM 34mm aluminum bubble level
Bighorn (Zermatt) Origin
Bartlein 26 inch 1:7 5R heavy palma barrel chambered in 6mm Creedmoor by SPR
Triggertech Diamond flat, black trigger set at 8 oz
Vortex Razor HD Gen 2 4.5-27x56 mrad
MPA Matrix Pro in NRA blue
MPA BA scope mount 0 moa 1.125 high
American Precision Arms Little Bastard muzzle brake
MKM 34mm aluminum bubble level
Holy shit I was just lurching on the threads. A thought that popped in my head minus how poor I am going through these was, that there is just something about the looks of a stock that I love compared to a chassis system. Next thing you know I'm on the McMillan website, man those are sexy stocks for some reason I don't like the competition ones though they just look weird as shit to me plus the flamboyant colors not really my thing.
