Precision Rifles.....show em!!

[PinesAndProjectiles]

Here is my T3X CTR. It's chambered in 6.5 Creedmoor. KRG X-ray, Atlas, and a Bushnell XRS sitting in Seekins rings. Shot a local match this weekend slinging some Prime Ammo 130s. No 1/4 moa out of it but it treated me well.

Sent from my iPad using Tapatalk

 

[Rory_Fritz]

Did you ever get a new coat of paint on the rifle?


Sent from my iPhone using Tapatalk

In fact I did!

 

[whopper]

Looks great!!! Is that rattle can paint. Can't go wrong with rattle can. I have a couple very similar. I only have this picture right now

Sent from my iPhone using Tapatalk

 

[Sprayed99]

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i93.photobucket.com\/albums\/l59\/sprayed99\/IMG_20170502_165543_zps6ttvdi2j.jpg"}[/IMG2]

Kelblys Atlas Tactical Action
KP barrel spiral flutes cut at 18.5"
Triggertech trigger
Manners EH1A Gen II mini chassis modified core highland camo
Custom mix cerakote to match stock
Dead Air Ti can
Near Titanium Alphamount
Vortex AMG
Chad Dixon and the rest of the LRI crew did the work

 

[sierracharlie338]

How about some MRAD love... in a 338 LM flavor...

and shots #6-8 after zero

 

[Simia Dei]

300NM built by APRS over here:

- Stiller Tac 338 action, 30 MOA rail
- 28" Bartlein 9 twist barrel
- S&B PMII, P4L fine
- AI scope mount, 18 MOA cant
- Rifle basix trigger, 1lb

A shitload of 230s loaded up for range day with retumbo.

 

[Boyscout618]

It's got its own thread going, but I have waited so long to post on here I can't resist!

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i1219.photobucket.com\/albums\/dd439\/boyscout157\/image1%201_zps1qnyqcah.jpg"}[/IMG2]

Remington Sportsman 78 Action
Factory Remington 7mm-08 Varmint 26 inch barrel
HS-Precision stock, with Remington buttpad
Vortex PST 6-24x50 FFP EBR-2C in a DNZ mount
Harris 6-9 inch
Matthew's Fabrication kydex cheek riser

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i1219.photobucket.com\/albums\/dd439\/boyscout157\/image2%202_zpsnyutjzgo.jpg"}[/IMG2]

Little bit better beauty shot:

 

[whopper]

Well, My 300 Norma isn't quite done yet but here is a photo I received from the West Texas Ordnance. They are still going to bed the action, Cerakote, and mount and zero the optic.

More photos to follow.

Sent from my iPhone using Tapatalk

 

[gszeto99]

Introducing the MDT ESS chassis setup:​

 

[Hagen]

6.5 Creed by Montour County Rifles
Blueprinted 700 w/Sako extractor
26 inch Lilja #5 contour
Manners eh1-a
Bushnell Lrhs 4.5-18
Seekins rings and base
Factory trigger at 14 ozs.
Harris bipod
Graphite black cerakote

And one with the wife's Ruger 6.5

 

[Simia Dei]

6.5 Creed by Montour County Rifles
Blueprinted 700 w/Sako extractor
26 inch Lilja #5 contour
Manners eh1-a
Bushnell Lrhs 4.5-18
Seekins rings and base
Factory trigger at 14 ozs.
Harris bipod
Graphite black cerakote

And one with the wife's Ruger 6.5

How do you find that EH-1A? It's on the list for the next build in carbon

 

[Hagen]

I just called manners. Ordered it through the group buy here. That one is in leaf green. It ain't beautiful walnut, but it sure is sweet!

 

[Simia Dei]

I just called manners. Ordered it through the group buy here. That one is in leaf green. It ain't beautiful walnut, but it sure is sweet!

Sorry, I should have written that better, how has your experience been with it? I have a T4A but was going to get something like that for my lighter hunting rig.

 

[Hagen]

Sorry, I should have written that better, how has your experience been with it? I have a T4A but was going to get something like that for my lighter hunting rig.

I really like it. Got it in the light fill and was worried how it would balance with that length of barrel. With the adjustable cheek it balances great. I had them send me a few to try out and didn't think I would've liked that vertical of a grip but love it.

Mines on an adl and carries just fine with my hand in front of trigger guard , but I've got big hands. Know that's been a deal breaker for a few because they say they're to wide there. Hope this helps.

 

[whopper]

I had them send me a few to try out.

That is great! Did you just call them and them and ask if you could try out a few stocks? I would love to get me hands in an EH5A before I order it.


Sent from my iPhone using Tapatalk

 

[Simia Dei]

I really like it. Got it in the light fill and was worried how it would balance with that length of barrel. With the adjustable cheek it balances great. I had them send me a few to try out and didn't think I would've liked that vertical of a grip but love it.

Mines on an adl and carries just fine with my hand in front of trigger guard , but I've got big hands. Know that's been a deal breaker for a few because they say they're to wide there. Hope this helps.

Thanks mate, I might try and get hands on one, I want to use an ADL as well.

 

[Hagen]

Yeah I just called to ask them a few questions and they said they would ship me a couple to handle. You just had to pay the return shipping and insure them on the way back. Think it ran me 20 bucks or so. Well worth it cause I sure wouldn't of picked that one off the bat, but glad I did.

 

[whopper]

That is great info. Thanks.


Sent from my iPhone using Tapatalk

 

[wareagle700]

Whiskey 3 chassis came in for my Tikka 6.5 Creed this week. Really liking this setup.


Tikka CTR 3 by X Ring, on Flickr


Tikka CTR 1 by X Ring, on Flickr

 

[700smooth]

Some sweet looking units

 

[viking78]

Does this count for precision rifle category?
Tikka T3X CTR 260rem.
MDT ESS chassis with diy dip.
Sightron SIII 6-24x50 FFP MRAD + Vortex Precision rings.
Phoenix tactical bipod.
I also have few different suppressor for this rifle.

 

[BootyLord]

Rem 700 sps
20" 1/12 .308
Maners T-a
Harris 6/9
Timney 517
Apa little B
FTW Sling
4-16 Vortex PST
Seekins low rings
Nightforce 20 Moa base
DIY badger knob

 

[whopper]

Rem 700 sps
20" 1/12 .308
Maners T-a
Harris 6/9
Timney 517
Apa little B
FTW Sling
4-16 Vortex PST
Seekins low rings
Nightforce 20 Moa base
DIY badger knob

Sweet Rig! What rounds do you shoot with the 1/12 barrel? Any load data?


Sent from my iPhone using Tapatalk

 

[BootyLord]

Thanks man. I've got 350 rounds of FGMM 168gr through it. Average 1.25 moa 5 shot groups. Would like to start reloading but I feel like I need to get my fundamentals down better. I still have 650 rounds to practice with for now.

 

[wooferocau]

Unique Alpine TPG-1..

 

[viking78]

Very happy with this rifle and it's shooting good

-Cadex Dual Strike chassis.

-Cadex MX1 Muzzelbrake.

-Cadex DX2 Trigger.

-Stiller tac 338 action.

-Lilja barrel 1-9 32" long.

-Era-tac adjustable 0-70moa mount.

-Kahles 624i MSR reticle.

-Aadmount scope caps.

-Elite iron bipod in aluminum.

My load now is Lapua brasses, scenar 300grs, fed 215 primers and 87.2grs Vihtavuori 570 Powder.
Muzzle velocity is 848 m/s and ES is 5 m/s.

Are you from Norway or Sweden?

 

[Vinjesvingen]

Are you from Norway or Sweden?

I'm from Norway, Telemark.

Olav E

 

[MShort]

GAP 7 WSM

Surgeon 591
Bartlein 1:8 twist MTU @ 26”
McMillan A5
Badger Ordnance M5
Timney Trigger
Cerakoted black

March F1 3-24x42
Burris rings that are soon to be replaced.

It is an absolute hammer shooting the 180 eld sub moa

 

[GTGunner]

Just got my Ruger Precision Rifle (6.5 Creedmoor) back from Rampart Gunworks where I dropped it off to get it sprayed with Magpul OD Green Cerakote to match the Magpul PRS stock I installed. Added a Vortex Razor HD Gen 2 plus Atlas monopod and bipod. She is ready to get to work....

 

[afd77]

 

[winniethepooh]

Fresh from SAC

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i490.photobucket.com\/albums\/rr266\/206f4i\/Mobile%20Uploads\/412CCF71-F5F6-4139-BD3E-22A96B21E6D5.jpg"}[/IMG2]

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i490.photobucket.com\/albums\/rr266\/206f4i\/Mobile%20Uploads\/9F717F10-2A86-49CC-B389-8FC7C1437C21.jpg"}[/IMG2]

 

[krt22]

My semi-cusotm MPA BA

-Atlas action, 22" Barrel
-MPA Lite chassis, factory camo cerakote
-Area 419 brake
-Sig Tango6 5-30x

 

[Veer_G]

Built by LPR Gunsmithing, North Swanzey, NH: http://www.lprgunsmith.com/index.asp

- Six-digit R700 LA receiver, trued and parkerized, original trigger worked to 2 lbs.
- Bushnell Gen 1 Elite Tactical DMR-G2 3.5-21 from SH Group Buy (back in the Stone Age)
- Seekins Aluminum "High" 6-4 34mm rings
- Badger Tactical 20 MOA rail
- Douglas XX "Air-Gage" 8mm Mauser (7.92x57) 1:10 CM barrel, 25" from back of recoil lug to threads, 1.88 breech, 4.5" taper to .900
- YHM QD FH .338 3702-20A 5/8"-24
- Manners T5 R700 LA mini-chassis stock, M24 channel
- KRG Bolt Lift
- Accurate Mag .30-06 (3.715") 5 rds. magazine, unmodified
- Harris 6-9" "S" bipod
- KMW Pod-Loc
- Triad Tactical Modular Stock Pack in Basic Black (but, of course ...)
- "I Survived Scout" Morale Patch (for the discerning, experienced, tactical marksman/connoisseur with taste )
- OAL, pre FH, is 46.5"

Yet to come: ACD/ACI combination ...

Weight, as pictured, is somewhere south of a just-born heifer, I imagine. I'll provide more accurate info when I get a chance to sneak up on a grain scale with it.

ETA: 15.6 lbs. YIKES!

Range report, such as it is, is in The Bear Pit.

 

[HalfinchGermany]

Hello from Germany, here my SRS A1 with Kahle 624i

 

[Geekmedic]

Tikka T3 in 6.5 CM built by DMR Rifles
Bartlein Barrel
McMillan A5 adjustable with CDI DMB
Vortex Razor 4.5-27 with Seekins rings on a NF rail
Atlas BT10-LW17 bipod

 

[Keith Johns]

[No message]

 

[blbennett1288]

Tikka T3 in 6.5 CM built by DMR Rifles
Bartlein Barrel
McMillan A5 adjustable with CDI DMB
Vortex Razor 4.5-27 with Seekins rings on a NF rail
Atlas BT10-LW17 bipod

who makes that cheekpiece pad you have on that stock?

 

[Blwxxzy]

Looks like a WieBad

 

[blbennett1288]

Thanks

 

[THE SENTINEL]

M40A5 Started life as a .308 built by GAP.Spec build.Put 900 rounds through it,shot some PRS matches and started looking at 6.5,Decided to have it re barreled in 6.5 Creedmoor Krieger barrel
1 and 8 twist MTU contour.I have to break it in then load development

 

[Geekmedic]

who makes that cheekpiece pad you have on that stock?

That is indeed a Wiebad cheek pad. I bought it directly from them.

 

[winniethepooh]

M40A5 Started life as a .308 built by GAP.Spec build.Put 900 rounds through it,shot some PRS matches and started looking at 6.5,Decided to have it re barreled in 6.5 Creedmoor Krieger barrel
1 and 8 twist MTU contour.I have to break it in then load development

Damn I'd leave that as a spec build and start over with a donor action. Nice A5!!!!

 

[trappedinny]

Bergara LRP Premier, 26" barrel
6mm Creedmoor
Burris XTR II 5-25x50 w/ SCR MOA reticle

 

[devldogs55]

Upgraded some components...

RBros "Tactical Rifle" on a "Rogue" action
Broughton comp contour in .308 at 22"
Manners T2A
Nightforce ATACR F1 5-25x56 MOAR-C
SPUHR Mount
Silencerco Omega

Feisol 3342 with RRS leveling base

<a href="http://s133.photobucket.com/user/devldogs55/media/Mobile%20Uploads/7CFC64BF-3507-400C-ABDA-840B547C6EA6_zpszhbx4rdh.jpg.html" target="_blank"><img src="http://i133.photobucket.com/albums/q78/devldogs55/Mobile%20Uploads/7CFC64BF-3507-400C-ABDA-840B547C6EA6_zpszhbx4rdh.jpg" border="0" alt=" photo 7CFC64BF-3507-400C-ABDA-840B547C6EA6_zpszhbx4rdh.jpg"></a>

<a href="http://s133.photobucket.com/user/devldogs55/media/Mobile%20Uploads/F3D1A01F-E613-4BD4-B16D-2F853DE30D70_zps4q3objuk.jpg.html" target="_blank"><img src="http://i133.photobucket.com/albums/q78/devldogs55/Mobile%20Uploads/F3D1A01F-E613-4BD4-B16D-2F853DE30D70_zps4q3objuk.jpg" border="0" alt=" photo F3D1A01F-E613-4BD4-B16D-2F853DE30D70_zps4q3objuk.jpg"></a>

<a href="http://s133.photobucket.com/user/devldogs55/media/Mobile%20Uploads/B3866412-F497-4A57-A326-3CF60168445E_zpsspekzsna.jpg.html" target="_blank"><img src="http://i133.photobucket.com/albums/q78/devldogs55/Mobile%20Uploads/B3866412-F497-4A57-A326-3CF60168445E_zpsspekzsna.jpg" border="0" alt=" photo B3866412-F497-4A57-A326-3CF60168445E_zpsspekzsna.jpg"></a>

 

[shields shtr]

Left
Tikka 6.5 Creedmoor
Proof 24" 1:8
MTN tactical stuff
CDI DBM
Manners T4A
Insight Arms Brake
Vortex AMG

Right
Lone Peak Arms Action in .300 Win Mag
Manners EH1A
Proof 24" 1:10
Wyatts DBM
TBAC Brake awaiting damn 7" Ultra
Athlon Cronus

Both are do all hunt/competition/generally shoot shit guns.

 

[token3495]

H&H Precision Rifle - 6.5 Creedmoor
Defiance Deviant action - LH aka wrong hand
24" Benchmark Med Palma barrel
Orias Chassis
XLR Tactical buttstock
Timney Calvin Elite
Ergo DLX grip
American Rifle Company M10 rings
Vortex 4.5-27x56 Gen 2 Razor
Thunderbeast Ultra 7 (6.5) now w/ prototype KYL Gear suppressor cover
RRS direct mount adapter
Atlas bipod w/ Hawk Hill spiked feet

 

[whopper]

H&H Precision Rifle - 6.5 Creedmoor
Defiance Deviant action - LH aka wrong hand
24" Benchmark Med Palma barrel
Orias Chassis
XLR Tactical buttstock
Timney Calvin Elite
Ergo DLX grip
American Rifle Company M10 rings
Vortex 4.5-27x56 Gen 2 Razor
Thunderbeast Ultra 7 (6.5) now w/ prototype KYL Gear suppressor cover
RRS direct mount adapter
Atlas bipod w/ Hawk Hill spiked feet

WOW! Beautiful rifle.


Sent from my iPhone using Tapatalk

 

[Skoalman]

Accurate Ordnance
Mars Receiver
22" Brux Barrel 1:8
Manners DBM
Manners T4A Desert Sage
Cerakote Austrian FDE
Trigger Tech
NF SHV F1

 

[Dstyles75]

Factory MPA 308ba, Vortex Razor HD Gen II 4.5-27x56

 

[Killbox_Alpha]

TRG
NF 5-22x56
TBAC 30 BA