Little bit of an update, finally got the recce 7.
Hello, I'm new here. Nothing special but here's my stick.
Howa 1500 HCR 6.5 Creedmoor 24"
Accuratemag Chassis and rear stock
Ross Schuler muzzle brake
Athlon Argos BTR scope 8-34X56
AIC mags
More accurate than me though with factory Winchester and Hornady match ammo.
Attachments
Last edited:
Trued 700 action with Holland bolt handle (TIG welded)
Bartlein 5R 1-10 twist SS barrel, M24 contour, 23"
Barreled action in Sig Dark Grey Cerakote
McMillan A5, pillars and bedded
Timney 510
Badger Ordnance M5 Enhanced bottom metal
Badger Ordnance 20 MOA steel scope rail with recoil lug
SWFA 10X42 HD scope
Seekins low rings
Holland 30mm level
Bartlein 5R 1-10 twist SS barrel, M24 contour, 23"
Barreled action in Sig Dark Grey Cerakote
McMillan A5, pillars and bedded
Timney 510
Badger Ordnance M5 Enhanced bottom metal
Badger Ordnance 20 MOA steel scope rail with recoil lug
SWFA 10X42 HD scope
Seekins low rings
Holland 30mm level
I'll submit my new rifle. First bolt action I've owned.
Bergara B14 HMR 6.5 Creedmoor
Vortex Viper 6.5-20x50
Leupold Mark 4 base
Leupold PRW rings - medium
SilencerCo ASR muzzle brake
SilencerCo Omega 762
Armageddon suppressor cover
Harris bipod
Going for break-in range time tomorrow after work.
Sent from my Nexus 6P using Tapatalk
Bergara B14 HMR 6.5 Creedmoor
Vortex Viper 6.5-20x50
Leupold Mark 4 base
Leupold PRW rings - medium
SilencerCo ASR muzzle brake
SilencerCo Omega 762
Armageddon suppressor cover
Harris bipod
Going for break-in range time tomorrow after work.
Sent from my Nexus 6P using Tapatalk
Ruger RPR 6.5 Creedmoor Gen II
PVA 26” Stainless barrel
PVA Mad Scientist Brake
Timney 2 stage triggerw/curved shoe
Seekins 15” SP3R V3 handguard
Triad Tactical sniper skid plate
TPM Naked titanium dragon scale bolt knob
Titanium engraved bolt shroud
TSW Enhanced Mag Release
Seekins ambi safety selector
Royal Arms International target grip
Vortex Viper PST Gen I 6-24x50 SFP
Vortex Precision 1.45” rings
Vortex scope level
Vortex Defender caps
Vortex scope levers
Accu-Shot BT12-QK butt stock monopod
Accu-Shot Atlas V8 BT10-LW17 bipod
House of Kolor Passion Purple Pearl PBC-65 basecoat with Cerakote MC-161 matte clear
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/farm5.staticflickr.com\/4306\/35239911513_4780bacb0c_b.jpg"}[/IMG2]
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/farm5.staticflickr.com\/4298\/35239907593_71cf2bc105_b.jpg"}[/IMG2]
PVA 26” Stainless barrel
PVA Mad Scientist Brake
Timney 2 stage triggerw/curved shoe
Seekins 15” SP3R V3 handguard
Triad Tactical sniper skid plate
TPM Naked titanium dragon scale bolt knob
Titanium engraved bolt shroud
TSW Enhanced Mag Release
Seekins ambi safety selector
Royal Arms International target grip
Vortex Viper PST Gen I 6-24x50 SFP
Vortex Precision 1.45” rings
Vortex scope level
Vortex Defender caps
Vortex scope levers
Accu-Shot BT12-QK butt stock monopod
Accu-Shot Atlas V8 BT10-LW17 bipod
House of Kolor Passion Purple Pearl PBC-65 basecoat with Cerakote MC-161 matte clear
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/farm5.staticflickr.com\/4306\/35239911513_4780bacb0c_b.jpg"}[/IMG2]
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/farm5.staticflickr.com\/4298\/35239907593_71cf2bc105_b.jpg"}[/IMG2]
Last edited:
Photo #1) Gen 1 RPR in .243. LRI Barrel (#2) and bolt shroud, Seekins 15' handguard, Magpul grip, XLR Tactical stock, Gen 1 PST Viper mounted in the economy NF rings. I plan on changing out the rings to ARC's sometime this summer and move up to a Gen 2 PST yet this year, early part of next. The barrel broke 100 rounds this evening, time to do some load work. So far it's liking 4451 and Berger 108's.
Photo 2 is a 700 Darrell Holland built up for me in '99. Started as a 6/250, McMillan Marksman stock. When that barrel was toast, I had re-barreled to a .308, Shilen 1-12" twist. Two years ago it was re-barreled with a Bartlein 11.25. XLR Element chassis and tactical stock, Timney trigger, Gen 2 PST in Vortex rings, KRG bolt knob. The Atlas PRS bipod is shared between the two. This thing thrives on Varget and 175 SMK's.
Both good shooters, the dummy pulling the trigger needs some work.
Photo 2 is a 700 Darrell Holland built up for me in '99. Started as a 6/250, McMillan Marksman stock. When that barrel was toast, I had re-barreled to a .308, Shilen 1-12" twist. Two years ago it was re-barreled with a Bartlein 11.25. XLR Element chassis and tactical stock, Timney trigger, Gen 2 PST in Vortex rings, KRG bolt knob. The Atlas PRS bipod is shared between the two. This thing thrives on Varget and 175 SMK's.
Both good shooters, the dummy pulling the trigger needs some work.
Attachments
Started life as a 700 VS .308.
I added a B&C stock, muzzle brake, Timney trigger and of course the cosmetics. The scope I am using now (different than the one pictured) is a Weaver Tactical. With respect to the paint (Krylon) I have had it in three different schemes. However, the "desert" scheme shown actually works well in the Fall on my property in the Missouri Ozarks (river bottom land on the Black River).
As an aside, I got the tripod from a thrift shop and built the mount.
I have only taken her out to about 600 yards. But I have been able hold it at about 1 MOA using 168 AMAX rounds. I suppose I'll be moving to ELD as soon as my supply of AMAX runs out. I have also taken about eight deer with her over the years using the same rounds.
I added a B&C stock, muzzle brake, Timney trigger and of course the cosmetics. The scope I am using now (different than the one pictured) is a Weaver Tactical. With respect to the paint (Krylon) I have had it in three different schemes. However, the "desert" scheme shown actually works well in the Fall on my property in the Missouri Ozarks (river bottom land on the Black River).
As an aside, I got the tripod from a thrift shop and built the mount.
I have only taken her out to about 600 yards. But I have been able hold it at about 1 MOA using 168 AMAX rounds. I suppose I'll be moving to ELD as soon as my supply of AMAX runs out. I have also taken about eight deer with her over the years using the same rounds.
Attachments
My Remington 700 AAC and AR15 "Recce" build. Can't wait to get out of Illinois and add a can to both.
Stiller TAC30, Short Action
Lilja 1:8, 3 groove 24" palma 6.5CM - SIG GREY Cerekote
SJS Titan Bolt Compensator
Jewel Trigger
American Precision Arms Detachable Bottom Metal
Grayboe Renegade Stock ATACS ACU Dip
Athlon Cronus BTR 4.5-29x56 w/sunshade
Seekins 34mm low rings
Lilja 1:8, 3 groove 24" palma 6.5CM - SIG GREY Cerekote
SJS Titan Bolt Compensator
Jewel Trigger
American Precision Arms Detachable Bottom Metal
Grayboe Renegade Stock ATACS ACU Dip
Athlon Cronus BTR 4.5-29x56 w/sunshade
Seekins 34mm low rings
Attachments
Last edited:
I really dig those rifles here! What's the weight of each? Looking to do a build with a cf wrapped barrel, but also with the same B&C stock. Thanks!
Tikka CTR 6.5CM in a McMillan A5, and a Burris XTRii 4-20.
Sent from my SM-G930V using Tapatalk
Sent from my SM-G930V using Tapatalk
New boomstick, courtesy of Short Action Customs.
[IMG2=JSON]{"data-align":"left","data-linktype":"2","data-size":"full","height":"407","width":"1280","src":"https:\/\/img12.deviantart.net\/effa\/i\/2017\/236\/8\/2\/50_by_haftelm-dbl6m77.jpg?1"}[/IMG2]
[IMG2=JSON]{"data-align":"left","data-linktype":"2","data-size":"full","height":"407","width":"1280","src":"https:\/\/img12.deviantart.net\/effa\/i\/2017\/236\/8\/2\/50_by_haftelm-dbl6m77.jpg?1"}[/IMG2]
Truvelo 7.62 CMS at the back, and
DPMS 7.62 REPR in the front
Sent from my iPhone using Tapatalk
Need rings & glass, but close. 1st legitimate long range bolt gun. Sorry for the sort of vague pic, its the best lighting i have and theres a pixel limit i guess.
24" 6.5 Bartlein, Stiller Tac30, T6A. Plan for AMG glass.
24" 6.5 Bartlein, Stiller Tac30, T6A. Plan for AMG glass.
West Texas Ordnance Switchlug
AICS AX with custom paint by Custom Gun Coatings
Proof CF barrels in .308 and 6.5 Creedmoor and TBAC Ultra 9
Schmidt and Bender PM II 5-25
Sent from my iPhone using Tapatalk
AICS AX with custom paint by Custom Gun Coatings
Proof CF barrels in .308 and 6.5 Creedmoor and TBAC Ultra 9
Schmidt and Bender PM II 5-25
Sent from my iPhone using Tapatalk
