-
Having trouble using the site?
Contact support
Tikka T3X TAC A1 6.5 Creedmoor
American Rifle Company 20 MOA scope mount
Vortex Razor HD Gen II 4.5-27x56
Harris bipod
How about a precision bolt action "pistol"?
This is built from a bunch of leftover parts, so it's kind of a Frankengun, but I'm still thinking it should do pretty well.
Barrel was off an 9.5" Arms Tech Compaq 16 upper I used on my M4 in Iraq. Was never drilled for a gas tube. Had a gas trap on the end. Take that off, and it's 8" long, very stiff, and was (in Iraq) very accurate. Hoping it still is. The Hogue grip was also a leftover from Iraq. Sentimental value having the grip you held onto, and the barrel you shot bad guys with on a new build.
The AR-Stoner side charger never got built, and barrels, and parts started going "out of stock" when the plague hit, so I used it here. Had to cut the alignment tabs off the rail due to the thickness of the billet upper. The scope, and bipod are leftovers from another rifle when I did upgrades, but I did have to order the new mount for the scope. The very nice smooth JP trigger was left over from when I put the Echo-II in my SBR. I was just going to do an upper for my SBR, but decided to get a new lower. Had to get one replaced from Larue for warrantee, so I went ahead, and ordered a new one while I was e-mailing the guy. The lower is the only new part other then the scope mount. (I did buy 3 x 10 rd mags) The flaming pig was leftover from WAY back, and has been on several rifles. Was just gonna go with the A2, but the pig goes to the end of the bipod legs when folded. Looked better. They gave me a blem for the warrantee, but this one is perfect... go figure... No gas tube, so no spring or buffer... Hope to zero and test it out soon.
This is built from a bunch of leftover parts, so it's kind of a Frankengun, but I'm still thinking it should do pretty well.
Barrel was off an 9.5" Arms Tech Compaq 16 upper I used on my M4 in Iraq. Was never drilled for a gas tube. Had a gas trap on the end. Take that off, and it's 8" long, very stiff, and was (in Iraq) very accurate. Hoping it still is. The Hogue grip was also a leftover from Iraq. Sentimental value having the grip you held onto, and the barrel you shot bad guys with on a new build.
The AR-Stoner side charger never got built, and barrels, and parts started going "out of stock" when the plague hit, so I used it here. Had to cut the alignment tabs off the rail due to the thickness of the billet upper. The scope, and bipod are leftovers from another rifle when I did upgrades, but I did have to order the new mount for the scope. The very nice smooth JP trigger was left over from when I put the Echo-II in my SBR. I was just going to do an upper for my SBR, but decided to get a new lower. Had to get one replaced from Larue for warrantee, so I went ahead, and ordered a new one while I was e-mailing the guy. The lower is the only new part other then the scope mount. (I did buy 3 x 10 rd mags) The flaming pig was leftover from WAY back, and has been on several rifles. Was just gonna go with the A2, but the pig goes to the end of the bipod legs when folded. Looked better. They gave me a blem for the warrantee, but this one is perfect... go figure... No gas tube, so no spring or buffer... Hope to zero and test it out soon.
Based on your multicam uniform and Rocky boots, are you a Coastie with one of the MSRT's or working with them in some capacity?
Switched from the MPA BA to an Alpine Hunter stock to better suit my needs
Spartan Precision build
Defiance Tenacity
Bartlein CFW in .260 REM
Manners EH1A Hunter with Spartan Bottom Dweller
Timney Elite Hunter
Vortex Razor HD gen2 witch ARC rings
Defiance Tenacity
Bartlein CFW in .260 REM
Manners EH1A Hunter with Spartan Bottom Dweller
Timney Elite Hunter
Vortex Razor HD gen2 witch ARC rings
Nice rifle. Love those stocksSpartan Precision build
Defiance Tenacity
Bartlein CFW in .260 REM
Manners EH1A Hunter with Spartan Bottom Dweller
Timney Elite Hunter
Vortex Razor HD gen2 witch ARC rings
Another oldie but goldie. The most accurate gun I have ever had, my previous Sauer STR with all the bells and whistles.
I shot the best group I have ever shot at 100 meters with that rifle:
I shot the best group I have ever shot at 100 meters with that rifle:
Last edited:
My latest build on one of my new favorite actions. Terminus Apollo with a proof prefit. Competition contour is a beast.
First few shots with 147gr eldm with load work up of SW Long Rifle.
First few shots with 147gr eldm with load work up of SW Long Rifle.
Last edited:
Updated the BMP with a KRG Bravo chassis which I find incredibly comfortable. Shooting photos is about the only thing I can shoot while hoarding what little ammo I have...
I also recently picked up this GG&G bipod. It's pretty close to what I would consider the perfect bipod for my use but I don't like that the panning feature can't be completely locked. I may do a little JB Weld project on it... KRG Spigot attachment coming soon too.
I also recently picked up this GG&G bipod. It's pretty close to what I would consider the perfect bipod for my use but I don't like that the panning feature can't be completely locked. I may do a little JB Weld project on it... KRG Spigot attachment coming soon too.
Last edited:
Just got the stock for this today.
Manners PRS1 mini chassis
Trued Remington 700
Bartlien heavy varmint bugnuts barrel
Nightforce ATACR 7-35
Area 419 Sidewinder
Manners PRS1 mini chassis
Trued Remington 700
Bartlien heavy varmint bugnuts barrel
Nightforce ATACR 7-35
Area 419 Sidewinder
Tikka T3x Tac A1
26” heavy contour prefit in 6.5 CM from International Barrels
Vortex Razor HD Gen II 4.5-27
Spuhr SP-4902 30moa mount
CKYE-POD
MDT Muzzel Brak, Arca Rail, Vertical Grip, Forend Weights
Sterk swept bolt knob
GRS bag rider
26” heavy contour prefit in 6.5 CM from International Barrels
Vortex Razor HD Gen II 4.5-27
Spuhr SP-4902 30moa mount
CKYE-POD
MDT Muzzel Brak, Arca Rail, Vertical Grip, Forend Weights
Sterk swept bolt knob
GRS bag rider
Savage 110 Elite .223
Athlon Ares ETR 4.5 x 30 x 56
Here's an updated photo of my Savage 110 long range build. Still rocking the Steiner Military 3-12x50 now comfortably nestled in a set of Spuhr 34mm rings.
Build list:
X-Caliber 24" 300 Winchester Magnum 416R Stainless 1:9 twist Cryo Treated
Light Palma Contour
Griffin Armament Reflex brake
Rifle Basix SAV-2 Trigger (1lb, 15oz.)
Magpul Bipod
EGW HD 30moa scope rail
Wolf 36lb firing pin spring
Lapped Bolt lugs & bolt body (stupid smooth, for a Savage)
wrapped the barrel in self adhering medical wrap. (haven't seen any POI shift yet)
Weight: 14lb 13oz.
Build list:
X-Caliber 24" 300 Winchester Magnum 416R Stainless 1:9 twist Cryo Treated
Light Palma Contour
Griffin Armament Reflex brake
Rifle Basix SAV-2 Trigger (1lb, 15oz.)
Magpul Bipod
EGW HD 30moa scope rail
Wolf 36lb firing pin spring
Lapped Bolt lugs & bolt body (stupid smooth, for a Savage)
wrapped the barrel in self adhering medical wrap. (haven't seen any POI shift yet)
Weight: 14lb 13oz.
ARC archimedes
Lothar walther 1-8 twist 24 inch 6.5 creedmoor 1.25 inch straight barrel
Triggertech diamond two stage
Manners prs tcs
Kahles 525i
MDT ckyepod
ARC rings
ARC magazine
Withoutwarning tmb
Haven’t weighed it yet but should be right at 20lbs. Really impressed with this action.
Lothar walther 1-8 twist 24 inch 6.5 creedmoor 1.25 inch straight barrel
Triggertech diamond two stage
Manners prs tcs
Kahles 525i
MDT ckyepod
ARC rings
ARC magazine
Withoutwarning tmb
Haven’t weighed it yet but should be right at 20lbs. Really impressed with this action.
Deadline LA
26” Bartlein 1:8 no taper 7WSM
MDT ACC
PST2 5-25 in PMRs
TT Special
Area 419 Sidewinder.. if I ever put it on.
Atlas V8 - until my CAL arrives
Throated for 180 ELDMs at 3.2” COAL, 3050fps with a gutload of H4350.
26” Bartlein 1:8 no taper 7WSM
MDT ACC
PST2 5-25 in PMRs
TT Special
Area 419 Sidewinder.. if I ever put it on.
Atlas V8 - until my CAL arrives
Throated for 180 ELDMs at 3.2” COAL, 3050fps with a gutload of H4350.
Picked up my first full custom rifle today. Gunwerks GRB action, Bartlein 24” Bull sporter 1-8” twist 5R barrel, Triggertech Special flat trigger, Grayboe Terrain stock and DBM, and a Leupold MK5HD 3.6-18 scope. Chambered in 280AI. I’m very excited!
Attachments
Tikka T3X CTR 260rem.
Timney 2-stage trigger.
KRG Whiskey chassis, with KRG ARCA kit.
Ensio Firearms custom fluted.
Ceramet M05 cerakoted.
Sterk swept bolt handle.
Audere mount.
ZCO 527 scope.
ColeTac dope card holder & Metal Phyton can cover.
Ase Utra SL5i can.
Sirui R-5214X tripod.
Timney 2-stage trigger.
KRG Whiskey chassis, with KRG ARCA kit.
Ensio Firearms custom fluted.
Ceramet M05 cerakoted.
Sterk swept bolt handle.
Audere mount.
ZCO 527 scope.
ColeTac dope card holder & Metal Phyton can cover.
Ase Utra SL5i can.
Sirui R-5214X tripod.
This, I like a lot. I'm just glad there's another M05 fan here.
This one is also Tikka a T3X round build precision rifle, but it has a Krieger SS barrel, and it is 6.5cm.
Sterk awesome swept bolt handle, like all my rifles.
Midas trigger from KRG, like the Whiskey chassis.
I really love these Whiskey chassis, once you try these, you know why these are so good.
Audere mount, ZCO 527 scope.
M05 cerakoted and spriral fluted.
I have shot 0.2 MOA with that rifle, 5 shots 100-meters with handloaded 123gr Scenar.
Atlas legs and Boscabel ti feets.
Zaine Beaton custom made titanium muzzle brake from Australia.
Sterk awesome swept bolt handle, like all my rifles.
Midas trigger from KRG, like the Whiskey chassis.
I really love these Whiskey chassis, once you try these, you know why these are so good.
Audere mount, ZCO 527 scope.
M05 cerakoted and spriral fluted.
I have shot 0.2 MOA with that rifle, 5 shots 100-meters with handloaded 123gr Scenar.
Atlas legs and Boscabel ti feets.
Zaine Beaton custom made titanium muzzle brake from Australia.
That is true.
Not even Finland, more multicamo or similar.
The PRS rig! Short Action Customs built TL3
Shooting Alpha brass and 140g eld’s
Groups in the .3s @100 and makes easy work out to 1k so long as you call your wind. Low impact on the ipsc is my buddies shot doping his rifle before I shot, with the snow it was too sloppy in the field for our vehicles without tearing up the farmers field
When your walking you certainly make less trips to repaint
Ipsc target @ 647 yds
10” diamond @ 740yds
Shooting Alpha brass and 140g eld’s
Groups in the .3s @100 and makes easy work out to 1k so long as you call your wind. Low impact on the ipsc is my buddies shot doping his rifle before I shot, with the snow it was too sloppy in the field for our vehicles without tearing up the farmers field
When your walking you certainly make less trips to repaintIpsc target @ 647 yds
10” diamond @ 740yds
Last edited:
Savage BA Stealth with 26in Criterion bbl, MDT XRS chasis, PVA brake, Badger Ordnance pic rail, & Atlas Super-Cal.
Last edited:
My first custom.. Only been at this long range precision thing since November, bought a Bergara B14 BMP in 6.5CM, then an RPR in 338LM, decided I love this shit and had this built by the amazing folks at Altus.
Chassis - MDT ACC with USMC Red cerakote
Action - Impact 737r
Barrel - Bartlein 24" M24 1-8 (6.5CM)
Trigger - Trigger Tech Diamond pro curved
Brake - Area 419 Sidewinder
Bipod - MDT Ckyepod
Optic - ZCO 527 MPCT3
Mount - Audere Adversus
Thank you so much to Josh at Altus and Richard at CS Tactical for getting my stuff to me ahead of schedule, and making sure I'm dialed for the Frank and Mark class at Pala next week!!
Brand new hunting rifle 
Heym SR30 in 8,5x63reb with a Kahles 2,4-12x56 and ATEC Supressor
Heym SR30 in 8,5x63reb with a Kahles 2,4-12x56 and ATEC Supressor
When I first got my Remington 700 Police and thought I would keep it as a basic set up. It was a short lived experiment and eventually it was rebuilt to resemble a Mark 13 mod 5.
A bunch of KRG fanboys on the range.
Remington 700
204 Ruger 39gr Sierra Blitzking
Choate Rifle Stock
Leupold VX-3i 8.5-25x50 TMOA Reticle
Timney 510 Trigger
.5 MOA Groups out to 500 yards w/ hand loads
204 Ruger 39gr Sierra Blitzking
Choate Rifle Stock
Leupold VX-3i 8.5-25x50 TMOA Reticle
Timney 510 Trigger
.5 MOA Groups out to 500 yards w/ hand loads
6.5 prc
WTO Caprock long action. Salt bath nitrated the action
Cadex Strike lite comp folding chassis
27" Bartlein CF 1-7.5 twist #14 contour barrel with a switch lug for barrel swaps and a Hawkins break
TriggerTech Diamond trigger.
Atacr scope. MDT elite rings
Arca rail with Accu tac f1 bipod
WTO Caprock long action. Salt bath nitrated the action
Cadex Strike lite comp folding chassis
27" Bartlein CF 1-7.5 twist #14 contour barrel with a switch lug for barrel swaps and a Hawkins break
TriggerTech Diamond trigger.
Atacr scope. MDT elite rings
Arca rail with Accu tac f1 bipod
