Precision Rifles.....show em!!

[Dj907]

Area419 6mm Creedmoor

 

[ThePewFactor]

Top:
Tikka T3 Lite 300wsm

Middle:
Tikka T3x Varmint 6.5 Creedmoor Cut to 18"

Bottom:
Zermatt Big Horn Origin 22" Bartlein CF 223 Wylde

 

[sl3dziu]

Bergara B14 HMR .308 + Delta Optical Javelin + Spuhr mount + AccuTac BR4 G2 + Nord Arms NA-MB308 compensator

Painting only on photo looks similar to original.. Antracite as base color + sponge camo with gray and sand color.

 

[VargmatII]

Bergara B14 HMR .308 + Delta Optical Javelin + Spuhr mount + AccuTac BR4 G2

Painting only on photo looks similar to original.. Antracite as base color + sponge camo with gray and sand color.

How do you like the Javelin?

 

[sl3dziu]

Comparing Javalin to my previous Vortex PST Gen 2 - Delta is better. It has brighter glass with sharper view..

 

[ejg]

Had our last day of the season last Sunday, was a beautifull morning and ended with two Sika deer shot at 395m. Rem 700 6.5CM, Hardy carbon barrel 20", Atlasworx AICS floor plate, 5 shot AI mag, PSE-Composites E-Tac4 Carbon stock just under 30oz, Spuhr Pica Rail, Spuhr one piece hunting mounts 34mm, Schmidt & Bender 3-20x50 Ultra Short PMII. Harris bipod. Grovtec Sling.

edi

 

[Carlos Danger]

Homemade precision.

C. Danger Armory one off
6.5 Grendel
ER Shaw 24" bull barrel
Boron Nitride coated BCG
Hoplite Arms Walmart upper
Luth stock
Ergo grip
Rise Arms trigger
Superlative Arms adjustable block
Atlas Bipod
Midwest Industries handguard
Vortex Viper 6-24

 

[Texasflyer]

These are my two go to rifles. The ruger rpr in 338 lm, and a 1995 winchester model 70 classic sporter BOSS in .270 i dont know much about the model 70 other than it fooled me thinking it was a pre 64 as it has the extractor and the browning boss system is pretty good actually. Never tuned a break for ammo before this.

 

[TurdFerguson]

Nothing exciting, Tikka tac a1 LE 308. Leupold VX3i LR scope, Badger Ordinance rings. Nothing exciting but enjoying it so far. First chassis I was able to get comfortable with. Only put 20 rounds through it so far, took a bit to sight in, but it seems accurate and got better the more I got used to the chassis.

Tikka Tac A1 LE 308, Harris bipod, Leupold Vx3I 4.5-14/175 grain SMK, 77 LC Match Brass, 42 grains IMR 4895, CCI primers/0.764+0.772+0.432+0.502+0.607=0.6154

Best group before subtracting diameter (0.308)

Just to prove I didn't pick and choose:

 

[SFC RHYNO]

Remington 700 AAC-SD
26" Schneider M24 contour 1/8 twist tight bore
.308 tactical chamber
McMillan A4
Area 419 brake
Timney Calvin Elite trigger
Badger bottom metal
NF ATACR-F1 5x25x56 with NF rings

 

[JRinNE]

Thanks to the help of a friend this is my first precision rifle, it’s a keeper, first 5 shot group was .385”
Bighorn Origin
26” Mullerworks 1/7.75” twist med Palma
6x47 Lapua
KRG Bravo
Bix n Andy Dakota trigger
Area 419 brake
Vortex strike eagle 5-25x56

 

[Dead Eye Dick]

Not the greatest picture. I’ll get better later.

MPA BA
6.5 Creedmoor
Leupold VX3 6.5x20 in Leopold mounts
Atlas BT Tripod

Can’t send her back, she made her guarantee while breaking in the barrel (one inch squares)

 

[cadehart]

Badger M2013 w/ Proof 18in
AICS
TT Diamond
Built by Spartan Precision Rifles

 

[dhunt]

20" Bergara .308 Win
Nightforce 20MOA Scope Base
Magpul Pro700 Folding Chassis
AAC Breakout
AAC SN762
Jewel HVR 14oz
Nightforce ATACR
Larue 34mm Mount

 

[dhunt]

Well I acquired a second 300 Norma from one of my best friends. It was made by Area 419 right before mine... little longer on the barrel and a different twist 1-8
vs my 1-9 View attachment 7563529View attachment 7563530

Nice!

 

[daw0ody]

Rem 700 LA
Chambered in .300 win mag
Vortex viper pst gen ii 5-25x50
Timney Calvin Elite single stage set at 1.5 lb
Silencer Co. Break
Diy at home cerakote

Not the most fancy setup, but sure is a tac driver. Only thing left is to fabricate a cheek riser.

 

[Dave62677]

Twins Area419 6mm GT and Area419 6.5 Creedmoor both in manners PRS TCS stocks and ZCO Optics.View attachment 7568717

i don't know why i grabbed a twizzlers candy after i look at this rifle

 

[Jake03]

My first decent bolt gun.
Bergara b14 hmr in 6.5cm,Nightforce nx8 4-32 in vortex pro rings on a 20 moa base and a Harris ultralight bipod.
Also have a yhm resonator r2 in jail for it.

 

[xanderzuk]

Well I acquired a second 300 Norma from one of my best friends. It was made by Area 419 right before mine... little longer on the barrel and a different twist 1-8
vs my 1-9 View attachment 7563529View attachment 7563530

Good Lord, what barrel length is that?

Looks awesome. Reminds me of a Narwhal

 

[Lucky1]

How big a boy are ya?! lol

can you get a good sight picture with your LOP way out and your scope so far forward?

Nice rifle.

That setup looks fine too me. My setups are very similar. Only downside to my LOP on my aics is it ran out of spacers

 

[Nightsniper]

Impact 737
6xc proof carbon 24”
Flat tt diamond
Manners tcs
Nf nx8 4-32 t3
Sphur 3000
419 sidewinder setup

 

[Bigrederic]

Good Lord, what barrel length is that?

Looks awesome. Reminds me of a Narwhal

The black one is 28" and the polished one is 29.5"

 

[Pelkey7154]

Remington 700
308 175gr Sierra HPBT
42.5gr Varget
Bell & Carlson Rifle Stock
Leupold VX-3 8.5-25x50 Target Dot Reticle
Timney 510 Trigger
0.5" MOA Groups at 365 yards w/ hand loads, 3 shot group below (I was adjusting scope settings on those other holes)
I've had similar groups stretched out to 500 so far. Over 5,000rds through the factory barrel and that grouping picture is from a month ago.

 

[Lunar95]

Tikka 3x CTR 6.5CM
TBAC Ultra 9
Viper PST Gen 2 5-25

I love this rifle.

 

[Bullfrog08]

View attachment 7566483
Evo stainless action, proof in 6gt,elf trigger, foundation stock, seekins rings, Hawkins hm and arca, atlas, Arken in pic but DMR2 PRO on it normally.

I love Great Plains!

 

[Longrangeprecision762]

18” Noveske

 

[Yellowhammer]

Anybody have an armageddon gear silencer cover in "ranger green"? Is it darker in person than in their pics? I'm wanting an OD green cover. Y'all pimp my gun & pick a color while I go clean out the storm shelter.

 

[el guapo 9300]

I'm looking for accurate rifle I can use for shooting targets at 500+ yards and also deer hunting. Probably in a 308. Most all of my hunting is from stands so I'm not too worried about the weight within reason. Any suggestions?

 

[Dead Eye Dick]

I'm looking for accurate rifle I can use for shooting targets at 500+ yards and also deer hunting. Probably in a 308. Most all of my hunting is from stands so I'm not too worried about the weight within reason. Any suggestions?

If I may suggest, you might get more responses if you moved your request to the general Bolt Rifle area. This is primarily a picture area where we show off our rifles.

 

[BisSilent]

Here is some JuNkWorKs V precision 22lr!!

 

[viking78]

 

[Anonymoose]

View attachment 7512072

My 300 Win Mag with a KRG chassis. Had to try it. It is normally bolted to an AICS AT chassis.

So how do you like the Whiskey-3 vs the AT chassis?

 

[Anonymoose]

My Bergara B14 6.5 Creedmoor in its I'm done (for now) state.
KRG Bravo with Aluminum Arca Forend, Spigot, T-Slot Weight
Area 419 Barricade Stop
Area 419 Bolt Knob
Burris RT25 5-25x56 (Suprisingly good for under $1k. But I sure would love an NF or ZCO...)
F3R Machine Mount
Timney Hit trigger set to 12oz
Bergara Muzzle Brake
GG&G Tripod with some "I hate panning" JB Weld handywork
Sitting on my super stable camera tripod...

I recently came across some Hornady Black 140g in Academy Sports and I wasn't expecting great results so I only bought one box to try. I shot 4, 5 rounds groups all under 1/2 moa. This one being my best by .006 moa. I'll be picking up more i guess. I also had some Copper Creek Cartridge Co. 140g Barnes Matchburner that this rifle didn't like, with results of 1-1.25 moa.

 

[5-0 MTB]

My first Accuracy International. Never looking back.

Dark Earth AI ATLE
16.5” .308 WinTac (6.5 Creed on the way)
ZeroCompromise 527 MPCT3
DeadAir Nomad 30
AccuTac Bipod
RRS Arca Rail

 

[VargmatII]

So how do you like the Whiskey-3 vs the AT chassis?

I like them both, but they area bit different in feel.
The AT is idiot proof, solid as a rock with good feel and ergonomics. It has a shorter pistolgrip and needs some add ons to have the same adjustability as the KRG.
The KRG is more refined, better ergonomics and all the adjustability you could ever want right out of the box.
There is no difference in accuracy with the same barreled action used between them.

 

[Anonymoose]

I like them both, but they area bit different in feel.
The AT is idiot proof, solid as a rock with good feel and ergonomics. It has a shorter pistolgrip and needs some add ons to have the same adjustability as the KRG.
The KRG is more refined, better ergonomics and all the adjustability you could ever want right out of the box.
There is no difference in accuracy with the same barreled action used between them.

Thanks, I'm considering an actual AI AT and I'm trying to gather as much info as possible.

I am also considering upgrading my Bravo to a W-3 back end.

 

[VargmatII]

Thanks, I'm considering an actual AI AT and I'm trying to gather as much info as possible.

I am also considering upgrading my Bravo to a W-3 back end.

The AIAT is a great rifle, the action is slick as snot. Your Bergara build looks nice as it is, but if you feel that you need the extra adjustability and maybe the hinge so you can fold the stock, then the W3 backend is a great option. I run one on my Sako Trg 22 as it is.

 

[Haydenegg]

AXSR this configuration is the 300wm (so ready for them to release the bolt body’s) with an F1 7-35 ATACR and a knights armament PVS30 clip on for night shooting with the atlas QD bipod and monopod and lastly the sig 338 lapua can

 

[Flolito]

Voere X4

 

[viking78]

Voere X4

375 Cheytac?

 

[Flolito]

338 LM but i plan to install a 375Cheytac Barrel in Summer. ( Voere X4 has a switch Barrel System)

 

[Shootnwrench]

FN SPR A5M XP 20” .308win
NX8 FFP 4-32 Mil-C
OPS Titanium 20MOA rail
ARC rings
Area 419 12” arcalock rail
MCARBO trigger spring
TBAC Ultra 7 CB
Atlas CAL w/ 419 clamp

 

[BuLLet]

Finally got out to the range today, been about 2 months.... It was late in the afternoon and really sunny out, almost blinding...

Added a new bag rider that pfl338 made for me. Only had time to put 10 rounds down range @ 200 yards.

Cleaned the gun and the first 5 on paper (200 Yards). Really hard to see with the bright sun

New bag rider from pfl338

 

[Nightsniper]

 

[Brink]

My 7 y/o son trying out the new Atlas/Accushot combo on my RPR. Took the picture right when the fire came out of the brake.

 

[Dead Eye Dick]

View attachment 7588436

My 7 y/o son trying out the new Atlas/Accushot combo on my RPR. Took the picture right when the fire came out of the brake.

Nice shot

 

[toopoorformore]

My main squeeze after spending almost a year piecing it together. My wife got a renovated kitchen (not shown)....I got a rifle. Lefties unite.

 

[Pocket]

Does anyone have pics of a “shorty” in a foundation genesis2 stock?
looking at ordering one with either a 20-22” barrel

 

[Pocket]

Thanks, ended up placing a build order for 20” (making a .22 trainer)

 

[dscl]

Family photo time