Precision Rifles.....show em!!

[Jellybean18]

Seekins Precision Havak 6.5 Creedmoor cut to 20"
MDT LSS-XL
Timney Calvin Elite 2 stage
Nomad 30 with Ebrake
Vortex Razor 4.5-27

Made my first hit at 1,000yd with this rifle!

 

[DJ 480]

Origin wearing a Proof 26in comp contour .223

 

[rottenruger]

I'll get this thread started again


26" Bartlein M24 .260Rem
Stiller TAC30
Murphy Precision 20MOA Scope Base
XLR Element Folding Chassis
Kampfeld Customs Brake
Jewel HVR 14oz
Vortex GenII 4.5-27x56 EBR-2C MRAD
Vortex PMR 0.92" 34mm Rings
Barrel and Scope Base cerakoted Snipers Grey
Action is melonite from factory

Patriot Valley Arms
26" Bartlein M24 6.5x47L
Bighorn TL3
Receiver DLC / Bolt NP3
XLR Element Folding Chassis
Jewel HVR 14oz
Rugged Suppressors 3 Port QD Brake
Vortex GenII 4.5-27x56 EBR-2C MRAD
Vortex PMR 1.26" 34mm Rings

Whoa, you've got me salivating!

Can you give any idea how much a Bartlein re-barreling including smithing should run on a RPR in 6.5 CM? Thanks kindly......

 

[Zack_va248]

Got the ol girl out this past weekend.
Great day of shooting! Always nice when the wind avg happens to be your gun mph. Makes for easy calls all day long!

 

[onethousandmeters]

Got the ol girl out this past weekend.
Great day of shooting! Always nice when the wind avg happens to be your gun mph. Makes for easy calls all day long!View attachment 7593115View attachment 7593116View attachment 7593117

That is a sweet setup!! Thanks for showing!

 

[DEWD_STUFF]

Got the ol girl out this past weekend.
Great day of shooting! Always nice when the wind avg happens to be your gun mph. Makes for easy calls all day long!View attachment 7593115View attachment 7593116View attachment 7593117

Who made that cover for your scope?

 

[kydron]

Who made that cover for your scope?

Believe those are made by https://www.scopechaps.com/

 

[Zack_va248]

Believe those are made by https://www.scopechaps.com/

Yep scopechaps! Great company that ships fast and makes quality gear to protect our investments and look great doing it!

 

[socchia16]

Still waiting for the suppressor to clear but just (almost) finished up this girl

what are those silver cocks?

 

[CerebralDistortion]

Sako M995. Krieger HV 26" 1:8 280AI (150 gr Scenar-L @ 2985 with about 60 gr VV N560)

 

[socchia16]

my first precision rifle. Savage axis 2 precision in 6.5 CM with a vortex diamond back tactical 4-16. Didn't break the bank and keeps up with the rest of them

 

[stevieb92]

Rem 700 in 6.5 Creedmoor. Action trued by SPR and fitted with their BugNut system. Recoil lug pinned by SAC. Bolt and barrel fluting and bolt handle timing by LRI. Firing pin and firing pin hole bushed by Gre-Tan Rifles. TriggerTech Special flat black trigger. Seekins 20 moa base.

 

[want to be]

Tikka T3x Tac A1
26” heavy contour prefit in 6.5 CM from International Barrels
Vortex Razor HD Gen II 4.5-27
Spuhr SP-4902 30moa mount
CKYE-POD
MDT Muzzel Brak, Arca Rail, Vertical Grip, Forend Weights
Sterk swept bolt knob
GRS bag riderView attachment 7547785

Harry,Looks GREAT! That is my next purchase TAC-A1 and a Razor

 

[sifer0425]

mine rpr 6.5 magpul stock, magpul grips, IBI barrel 1:8 twist 26inches. tactical muzzle brake 45 degrees. magpul bipod, anarchy outdoors bolt arm bolt knob , and bolt shroud. burris cant mount, vortex strike eagle 5x25x56ffp scope moa

 

[AlrightAlright]

 

[PRCdude]

300 PRC custom built by Alamo Precision Rifles

MPA BA competition chasis
Triggertech Diamond
Defiance Deviant Action - 30 moa rail
Bartlein 28" barrel 1-8 twist
Eric Cortana Barrel Tuner
Sphur scope rings (20 moa)
NIGHTFORCE 5X25 atacr
Atlas Super Cal bipod
Sandmas S Suppressor

 

[Dale264]

6mm BR
Rem 700 with Badger mini bolt handle (modified ejector plunger to get reliable ejection)
Preferred Barrel Blank 3r
- 0.060" Freebore
- 0.272" Neck
- 24" 8 Twist
- 0.800" contour
- PBB barrel nut
Timney 510 trigger
Magpul hunter with magpul bottom metal
- Bedded the aluminum block
Vortex Viper Gen 1 6-24x Ebr2c Mil
Warne 20Moa Base
Weaver Tactical 30mm rings
10rd Modified Magpul mag with BR spacer
Integrated 1/4x20 hardware for mounting arca-swiss plate for tripod

 

[IowaGeologist]

6mm BR
Rem 700
Preferred Barrel Blank 3r
- 0.060" Freebore
- 0.272" Neck
- 24" 8 Twist
- 0.800" contour
- PBB barrel nut
Timney 510 trigger
Magpul hunter with magpul bottom metal
- Bedded the aluminum block
Vortex Viper Gen 1 6-24x Ebr2c Mil
Warne 20Moa Base
Weaver Tactical 30mm rings
10rd Modified magpul mag with br spacer
Integrated 1/4x20 hardware for mounting arca-swiss plate for tripodView attachment 7596015

Nice rig, love that mini Badger bolt handle. What BR kit are you running in the mag?

 

[Dale264]

Nice rig, love that mini Badger bolt handle. What BR kit are you running in the mag?

It's artisanal and one of a kind. Jimmy'd it up for a few dollars at my bench and functions 100%.

 

[Blueoval56]

Desert Tech SRS-A1 26” 308
MDT Brake
Atlas
Bushnell XRSii 4.5-30x50
Near Mfg Alphamount 40moa

 

[NiteQwill]

Foundation Centurion grain...

 

[VargmatII]

From last spring.
My TRG22 and my FX Impact .25 cal.
Both have different scopes now.

 

[Tomiboy]

Foundation Centurion grain...

Beautiful!

 

[Tokay444]

My first post on Sniper’s Hide was in this thread, of this gun with 3 different 6.5CM barrels from PVA on it.
I just received a custom 28” x 1.25”Ø 6BR Norma cut rifled barrel from KS Arms in Edmonton Canada, and later this month, when my Archimedes action and two stage TT Diamond gets here, one of those 6.5 barrels will go back on my Nucleus, and I’ll have 2 rifles to drop into this JAE-700.

 

[ReaperDriver]

Thanks, I'm considering an actual AI AT and I'm trying to gather as much info as possible.

I am also considering upgrading my Bravo to a W-3 back end.

I got an AT in .308 a while back and then bought a couple of 26" Bartlein .260 barrels. Best rifle I've ever owned and was 1/3 MOA accuracy out of the box. It's one of the few rifles where I've never once thought..... "I just wish this one thing was different". There's nothing I would change about it.

 

[matchbook454]

Beanland Custom 7 SAUM build.

25.5” Brux #5 1-8.5” twist
AG Composites Alpine Hunter with 14.25” LOP
Defiance Deviant GA Hunter and Nitrided Bolt in XM length with Defiance BDL Bottom Metal
TriggerTech Primary
Kampfield brake blended to barrel
Patriot Brown Cerakote
NF NX8 4-32 F2 in NF low UL Rings
MKM scope level

I’ve got 90 rounds down the tube and no complaints. Shooting 180 Berger Hybrids at 3,000 FPS. Nice node and great accuracy. Can’t wait to hunt this rifle!

 

[SpookM14]

View attachment 7585348

I love those KRG enclosed forends!!

 

[sergeantbernie]

Carbon fiber theme here:

Tikka T3 CTR action
Proof Research CF 22" 6.5 Creedmoor
TBAC CB mount
Spartan javelin CF bipod
XLR carbon chassis
Smokes Composite CF stock
Smokes Composite CF grip
Lumley CF knob
Murphy Precision Ti rail
Leupold VX6 3-18x44mm
Nightforce ultralight rings



Carbon rifle

 

[Bakwa]

Carbon fiber theme here:

Tikka T3 CTR action
Proof Research CF 22" 6.5 Creedmoor
TBAC CB mount
Spartan javelin CF bipod
XLR carbon chassis
Smokes Composite CF stock Smokes Composites CF grip
Lumley CF knob
Murphy Precision Ti rail
Leupold VX6 3-18x44mm
Nightcore ultralight rings



Carbon rifle

What's the weight on that thing?

 

[sergeantbernie]

What's the weight on that thing?

Right at 10 lb as shown.

I was really hoping XLR would make the carbon chassis with a magnesium option to shed another half pound but no luck. I just really liked the look and feel of the carbon versus the element or envy.

Include an 18-20-in barrel (not available in proof research prefit) and a lighter than current 22 oz scope with chassis savings could have put me as much as a pound down.

Throw in a titanium action and fluted bolt for good measure and I'd have pulled about as much as possible out.

 

[Bigrederic]

My latest rifle is in, and I hope to shoot it tomorrow. I ordered a barreled action from Caleb at Alpha and Omega and my God it impressed me. I can't recommend him enough... my 9yr daughter wants to use this one for her black bear this year now.... even she is smitten with it. The Rex Silentium can matches so well..

 

[Dead Eye Dick]

She finally got to play on the big range today. Getting the range card put together. Actually much steadier to shoot than the RPR. 800 yards, piece of cake. MPA/ BAPro. 6.5 Creedmoor, older 6.5 x 20 Leupold, Leupold rings and Atlas bipod.

 

[Packfan]

A few nice MPA PMR Pros recently! I am in the process of putting mine together and will post a picture when complete. It is a left hand PMR Pro 6.5 CM in Tungsten.

 

[LeftyJason]

Tikka JRTXB482 lefty stainless t3x lite 6.5 creed
Vortex razor 2 4.5-27x56 7c mil in vortex precision rings (used off the hide)
Murphy tactical 20moa titanium rail (just cause I could)
Caldwell sling adapter, rrs sc-lr, rrs atlas adapter spacer, Atlas CAL gen 2 no dye (thanks @Kasey)
View attachment 7435871View attachment 7435872

Update day!

Tikka JRTXB482 lefty stainless t3x lite 6.5 creed

Vortex razor 2 4.5-27x56 7c mil in vortex precision rings (used off the hide)

Murphy tactical 20moa titanium rail (just cause I could)

RRS sc-lr, RRS atlas adapter spacer, Atlas CAL gen 2 no dye with Atlas spike FEET (thanks @Kasey)

KRG whiskey 3 with arca rail. Krg branded accurate mags.

Note: bolt handle isn't all the way down. Will have to make a slot for the bolt handle on the correct side.

Weight with everything listed above with empty mag 14.8lbs.

 

[ThePewFactor]

 

[viking78]

Update day!

Tikka JRTXB482 lefty stainless t3x lite 6.5 creed

Vortex razor 2 4.5-27x56 7c mil in vortex precision rings (used off the hide)

Murphy tactical 20moa titanium rail (just cause I could)

RRS sc-lr, RRS atlas adapter spacer, Atlas CAL gen 2 no dye with Atlas spike FEET (thanks @Kasey)

KRG whiskey 3 with arca rail. Krg branded accurate mags.

Note: bolt handle isn't all the way down. Will have to make a slot for the bolt handle on the correct side.

Weight with everything listed above with empty mag 14.8lbs.

View attachment 7601756View attachment 7601757

What Tikka is it?
Super Varmint?
Are you going to do the lefty mod on the chassis, or drop it to the gun smith?
I have 3 Whiskey, get the ARCA spigot, you will love it

 

[viking78]

T3X CTR 260rem.
Whiskey chassis.
Still shoots one hole, even i have let over 4K thru that factory barrel.

 

[LeftyJason]

What Tikka is it?
Super Varmint?
Are you going to do the lefty mod on the chassis, or drop it to the gun smith?
I have 3 Whiskey, get the ARCA spigot, you will love it

It is the lite stainless. Couldn't get what I wanted (left handed stainless 6.5 creed) any other way in the US.

I bought my bench vise from a local guy with a machine shop and he said I could come and use his machines sometime. He does some gun related stuff already.

I might get the spigot later once I can shoot it in the chassis. Also thinking of getting some products from Sterk. I've got awhile to go till I need to change the barrel but it'd be nice to get one that I can thread 5/8. Eventually want to get a thunderbeast can that will fit it as well.

Its taken me a few years just to get this far and the wife is annoyed at how much I'm into guns. Next gun related purchase is going to be a RRS tripod since the wife can use that for camera stuff as well. She wants to get into macro stuff.

 

[Whiplash6.5]

T3X CTR 260rem.
Whiskey chassis.
Still shoots one hole, even i have let over 4K thru that factory barrel.
View attachment 7602187

What can are you running?

 

[Matt_3479]

My first post on Sniper’s Hide was in this thread, of this gun with 3 different 6.5CM barrels from PVA on it.
I just received a custom 28” x 1.25”Ø 6BR Norma cut rifled barrel from KS Arms in Edmonton Canada, and later this month, when my Archimedes action and two stage TT Diamond gets here, one of those 6.5 barrels will go back on my Nucleus, and I’ll have 2 rifles to drop into this JAE-700.
View attachment 7596574

Your going be switching bbl actions back and forth? Looks awesome by the way

 

[Tokay444]

Your going be switching bbl actions back and forth? Looks awesome by the way

I don’t know how much, but yeah. At least until I get another stock/chassis and optic.
The BR posted this on shots 45-50 at 200 yards the other day, and I called the 5th shot, so I don’t know how often I’ll want to shoot the creed...

 

[LeftyJason]

What can are you running?

I think it's an Ase s series. It's one we can't get in the US. @viking78 is in Finland.

 

[Matt_3479]

I don’t know how much, but yeah. At least until I get another stock/chassis and optic.
The BR posted this on shots 45-50 at 200 yards the other day, and I called the 5th shot, so I don’t know how often I’ll want to shoot the creed...
View attachment 7602431View attachment 7602432

Did ks do the chambering and prefit to your action or just a blank and had someone else chamber

 

[Tokay444]

Did ks do the chambering and prefit to your action or just a blank and had someone else chamber

They chambered it from the ARC tenon print. Overall I’m extremely happy.

 

[Wheres-Waldo]

 

[Matt_3479]

They chambered it from the ARC tenon print. Overall I’m extremely happy.

I see they are starting to offer other action prefits but requested a few to be sent in

 

[LOS]

 

[Tokay444]

I see they are starting to offer other action prefits but requested a few to be sent in

Yes, initially, Mike had asked for the action. I asked if I sent him the tenon print if he could make the barrel from that, and of course, being a machinist, his reply was, “absolutely!” But to time the the engraving to the side of the gun, he’d need the action or one of my old barrels. Originally I was going to send him a barrel, but eventually I told my OCD to get fucked, and told him to just engrave it anywhere. I’ll live with it.

 

[viking78]

What can are you running?

Ase Utra Sl5i, smaller than coke can.
12oz and it is 100% SS.

S Series SL5i - Ase Utra

www.aseutra.fi

 

[auskip07]

Figured i should build a bolt action because why not.

24" Oregon Mountain Carbon fiber barrel 6.5 Creedmoor (Remage) 1:8 twist
Remington 700 Stainless, Trued, Lapped.
Greyboe Phoenix stock
Timney Trigger
Vortex Viper PST Gen 2 5-25x (got a good deal for $799 Showroom demo)


Nothing too fancy but i wanted something that i could take hunting and performed well on a bench rest.

Eager to take it to the range