precision rifles... show em

[lencomatt]

I love the color of the PSR

 

[islandermyk]

GAP "Rock" .308

 

[Boltfluter]

Guys,

A couple of my favorite coyote rifles in the field.

Regards,
Paul

 

[Skullboy]

My Rig after a chassis & color change.........

MDT TAC-21 Chassis in Gun-Kote Flat OD Gray
Rem 700 Action, Blueprinted.
Stainless McPhee 26.5" AMTU contour barrel - .308Win, 1 in 11.3" twist.
Magpul PRS stock with MDT Adjustable Butt Plate
Magpul Miad grip
Badger Ordnance Maximized High Rings
Schmidt & Bender 5 - 25 X 56mm PM-II

 

[308plinker]

First custom build.......can't wait to see what she'll do!

 

[Nebula]

Just got done putting some rounds down range with her. Sorry for the crappy cell phone pic.

 

[Rem40xb1]

nice rifles

 

[Rem40xb1]

nice long range shooter

 

[Pleistarchus]

Mrad

Dressed and ready to go. First stop 1000yards.

 

[Gray]

Here's my new 260 built by Wolf Precision
-BAT Tactical Action
-26" Bartlein Barrel with SF Brake
-Manners T4-A
-Schmidt and Bender PM II 5-25 MSR
-Jewell Trigger @ 1lbs.

 

[jabels]

Dressed and ready to go. First stop 1000yards.

That MRAD is sweet looking. Is that a 4.5-30 or 3.5-21 Bushnell on top?

Nice setup either way.

 

[MadCountyDep]

Well, I guess I can dive in here and share... I apologize, I only have a camera on my iphone and I'm currently in my office, so the lighting is poor...

Remington 700 SA .243
shortened barrel to 20"
Rock Solid Stock with 9-13 bipod
SWFA SS 12X42 scope
AICS 10 rnd mag

Things I'd like to change.....
1. replace the medium rings with low rings
2. nicer quality AR grip
3. 6-9" bipod to replace the 9-13

Nothing fancy right now with the action as I'm waiting till I need to rebarrel to go all out and have it blueprinted.

 

[.308mk4]

image.jpg (99.7 KB)6.5x47 Lapua built by me with CPR holding my hand.

image.jpg (92.0 KB).308 Winchester match built by Carolina precision rifles.

 

[MrBlu]

Remington 700 SPS .308cal w/ a Bushnell Tactical Elite 6-24x50 Illuminated Mil-dot.

 

[GSIceland]

 

[danny.k]

 

[roadrash1970]

Accurate Ordnance Custom built .300 WM. Stiller Precision TAC 300, Brux Match with an MTU contour, jewel trigger at 1.5#'s little bastard brake (thread protector pictured) and an AI Folding chassis topped with a NF 8-32x56 MOAR Zero stop 18.5lbs


click to enlarge

 

[roadrash1970]

Nice looking rifle... I feel exactly the same as you do about Accurate Ordnance, What a great bunch of folks! Would recommend AO to anyone looking for a custom and Mark and his team have been outstanding throughout the entire process, very lucky to have found them. They built my .300WM which shares the same chassis and Action that your build did.

 

[SniperJoe]

Just got my Remington .308 in from Mark and the guys last week. Had the same great experiance with AO. Gun looks and preforms flawlessly.

 

[Jackcrow73]

Savage Model 10 FCP-K .308
Vortex Viper PST 6-24x50 FFP MOA

<a href="http://s1340.photobucket.com/user/jackcrow71/media/002_23_zps290a03ae.jpg.html" target="_blank"><img src="http://i1340.photobucket.com/albums/o731/jackcrow71/002_23_zps290a03ae.jpg" border="0" alt=" photo 002_23_zps290a03ae.jpg"/></a>

 

[Coltster]

Proof 6.5CM

Proof Research built 6.5 CM
Elesio RTS w cerakote camo
24" Carbon wrapped Bartlein, AAC SDN6
Defiance action

 

[lencomatt]

Any details on this one?

 

[Sniper Uncle]

My Rem-700P 338LM

This rifle has not been fully tested/tuned by me yet, but I am sure that it easily shoots better than I can. We had a sub 3" group at 560 yards, and I think a good part of that may have been me. Several sub 1/2 MOA groups at 300yds.

Remington 700P
34" Lilja Barrel
Factory HS Precision stock
NightForce 8-32x56 NXS Zero-Stop
JP Recoil Eliminator

 

[BamaAl]

New Build Started

Starting with a Savage 10 FCP McMillan 308. Factory barrel at this point. The scope is a Leupold Mark 4 8.5-25x50 ERT. Badger Ordnance 20 MOA base, and Badger Ordnance rings. Sinclair 3rd Gen F Class bipod.

A Bartlein 30" stainless, 1:10 twist, Whitley medium palma contour is ordered. It will be duracoated and glass bedded.

Just a little excited!

 

[SniperJoe]

Need help with posting pics.

For the life of me,,,,, I can't figure out how to get me pictures to show full size in my post. All I can do is get the thumbnails attached. I read the instructions and it says to click the attachment icon,,,, I can't seem to find it. Some help on this would be appreciated.

Thanks

 

[Lukas Koukal]

Works in progress; still figuring out a mounting option for the bipod to put it further forward and closer to the bbl. Already a keeper, though.

 

[GSIceland]

Any details on this one?

Sure

Tikka T3 Varmint in 260 Rem
GRS Long Range Stock from www.grsriflestocks.com
CDI bottom metal
AICS magazine
EGW 20 MOA rail
Nightforce NXS 5,5-22x56 with Zero Stop and HS turrets
Nightforce rings
Atlas Bipod
Roedale muzzlebrake
HSS Bolthandle
Aluminum bolt shroud

 

[WhiskeytangoM3]

GSIceland, your rifle stock is gorgeous!

 

[SpookyPistolero]

Then some rattling...

 

[sulcop96]

A few of mine

My 700, AICS skins (painted by ShortBus) Timney, SS 5-20, and a few more upgrades. The other is my FN SPR with McGowen barrel and Manners GAT, she now rides a Razor. Also have a Howa in a XLR I have to get photos of.

Sully

 

[The Revenge]

Savage model 10pc 308 20" 5r.
Vortex PST 4-16
Burris low rings
EGW base

R700 300wm 24" 5r
Mcree chassis
Scope undecided--US Optics, S&B, or March

 

[hintonrc51]

6.5X47 Lapua

GAP
6.5X47Lapua
MCM A5
Hart 1-8
NF F1 mil/mil
RB/LP

 

[courtier]

Works in progress; still figuring out a mounting option for the bipod to put it further forward and closer to the bbl. Already a keeper, though.

Lukas, you are first person I've ever seen who has/uses the AI anti-mirage strip. Does it actually work? I'm curious...

 

[courtier]

Here's my new 260 built by Wolf Precision
-BAT Tactical Action
-26" Bartlein Barrel with SF Brake
-Manners T4-A
-Schmidt and Bender PM II 5-25 MSR
-Jewell Trigger @ 1lbs.

Gray, what made you choose the S&B PMII with locking turrets (in FDE) over the non-locking version which is a few hundred $$ less? Obviously, it wasn't color matching. ;-) And you can get the MSR in the "cheaper" version so it wasn't reticle choice either. So I'm curious if you just got a great deal or if locking turrets really add that much? Thanks. And nice stick by the way.

 

[Lukas Koukal]

[MENTION=80880]courtier[/MENTION]: Sure the band works, especially in rapid fire strings that heat the barrel up fast combined with the cold weather we have now - the mirage over the barrel would otherwise be realy annoying.

 

[Hennig]

Rem700 .223 5R
Rifle Basix L1-K
USO Base
Seekins Medium Rings
Razor
JAE700 Chassis
Atlas

Weighs in at 16.2lbs :/

 

[courtier]

[MENTION=80880]courtier[/MENTION]: Sure the band works, especially in rapid fire strings that heat the barrel up fast combined with the cold weather we have now - the mirage over the barrel would otherwise be realy annoying.

Thanks, Lukas. If I ultimately go the AI route, I will have to keep that option in mind. Though now I'm wondering why other manufacturers don't offer a similar accessory option??

 

[Lukas Koukal]

[MENTION=80880]courtier[/MENTION]: They are indeed. The one in my picture is actually made by Roedale, and is their 2" wide variant. I know SAKO has their own for TRG rifles ans SIG used to deliver one, too. In general - hard material is best, but worse at transport. Cordura with a bit of elastic works best for me. A band made entirely from elastic material is not that great, the heat passes through too easily. Hope this helps, L.

 

[Bugaboo]

Is this picture from this Saturday? You did pretty well, considering the conditions. Nice stick, too.

I have the SAKO mirage band and it is OK, but Lukas is right, the heat passes through. Guy next to me this Saturday had a carbon-fiber band, a bit complicated for transport, but works very well.

 

[courtier]

"a carbon-fiber band"

That sounds intriguing. Any details on manufacturer, where to buy, etc.? Thanks.

 

[Bugaboo]

It is simply a stripe made of carbon-fiber material and attaches to the barrel with Velcro. Quick Google session brought this: SS/Anti-mirage band :: STAR SHOOTER
The one I have seen at the match looked a bit different, but the idea is the same.

 

[Gray]

Gray, what made you choose the S&B PMII with locking turrets (in FDE) over the non-locking version which is a few hundred $$ less? Obviously, it wasn't color matching. ;-) And you can get the MSR in the "cheaper" version so it wasn't reticle choice either. So I'm curious if you just got a great deal or if locking turrets really add that much? Thanks. And nice stick by the way.

The reason I got the tan S&B over the regular is because in February when I got this scope I called every S&B dealer there was and nobody had ANY SCOPES in any configuration, they were just out. Said it would be a few weeks to a few months before they got more. I needed one right then for this new rifle to shoot Bushnell Brawl 2 weeks away. Called up Europtics and bought the locking version since it was one of the two they had. I do like the MTC however, and I had the regular DT turrets before. Can be hard when trying to get to the first .1 mil after a "big click" at a whole mil, but still really like the scope. I've got plans for the stock so that it will better match the scope but it still looks really good in person.

 

[coWSMasher]

That's my savage axis 22-250. My hunting rifle is off at pacnor being rebarreled for 6.5 WSM I will put that up here when it gets back... in June

 

[courtier]

[MENTION=78962]coWSMasher[/MENTION]: Is that a CF wrap? I've never seen a rifle like that before. It looks cool. Out of curiosity why the double set (total of 4) scope mounts?

 

[anthonylapoint]

Savage 10 rebarreled with hart 1-8tw chambered in 6X, B&C Medalist, Vortex Viper, Weaver base/rings. Bedded and textured by me

 

[S12A]

Stock looks great!

 

[anthonylapoint]

Thank you s12a, that means a lot. My Savage doesn't get much attention. By the way, what does s12a mean

 

[kriegerhaus]

here is a couple pics of mine, nothing special as its my first precision rifle. i have shot a sporterized 1903mk1 all my life, so i decided to pick up a rem 700 sps tac .308
the stock sucked donkey b@##s so it6 had to go. i picked up a B&C M40 style stock and did my own GAP camo job with the rattle cans. i plan on doing more as funds permit then when i burn the barrel out i want to have it rebarreled to 6.5 creedmoore.
but here she is
before the camo job

and after

 

[vegasjeepguy]

Remington 700 SPS AAC SD on a McMillan M40 stock with a Vortex Viper PST 4-16x FFP

 

[chuckshoots]

I have not posted much here, but I am quite the lurker, and after 40+ pages of checking out all these awesome rifles I had to post mine.

Rem 700 SPSVar in 308, 12"twist, 26"bbl
McM A5 bedded
NF NXS 3.5-15x50F1
NF rings
EGW 20MOA base
Jewell trigger set to 1.5lbs
Custom knob
something like 800 rds down the stock barrel
Starting reloading last summer and have been shooting:
40.7grs Varget, 175 SMK, 2.800 OAL, Hornady match brass, Fed210primers, and have gotten it down to .353" group at 100yards with bipod and rear bag.

hopefully going to add surefire brake to it in the next few months, as well as getting out to the300 yard range a couple hours away.