NukeMMC Chlanna Nan Con Thigibh A’ So ‘S Gheibh Sibh Feòil Supporter Full Member Minuteman Mar 3, 2009 1,704 1,034 Harrisburg, PA Oct 4, 2019 #101 Oct 4, 2019 #101 Same twist I had. My dad's pre-64 M70 varmint has a 10" twist that spun the same bullets just fine. Reactions: Codiekfx400
1 105gr Sergeant Full Member Minuteman Jul 23, 2010 687 634 45 ohio Oct 4, 2019 #102 Oct 4, 2019 #102 Mine was cut to 16.5" and stabilized the 87's just fine. I was getting 2980 and shooting 1Kyds with it. Till the barrel got rusty...
Mine was cut to 16.5" and stabilized the 87's just fine. I was getting 2980 and shooting 1Kyds with it. Till the barrel got rusty...
S Shooter89 Sergeant of the Hide Full Member Minuteman Jul 7, 2019 129 20 Oct 4, 2019 #103 Oct 4, 2019 #103 Ok so what should i do with my flyers issue? Set to max magazine length then find a good load with power then adjust to tighten?
Ok so what should i do with my flyers issue? Set to max magazine length then find a good load with power then adjust to tighten?
1 105gr Sergeant Full Member Minuteman Jul 23, 2010 687 634 45 ohio Oct 4, 2019 #104 Oct 4, 2019 #104 seat to saami spec and work the charge first
1 105gr Sergeant Full Member Minuteman Jul 23, 2010 687 634 45 ohio Oct 4, 2019 #105 Oct 4, 2019 #105 but before you do that get a chrony
S Shooter89 Sergeant of the Hide Full Member Minuteman Jul 7, 2019 129 20 Oct 4, 2019 #106 Oct 4, 2019 #106 I have access to one, just need to get bullets and powder in the next 2 weeks
NukeMMC Chlanna Nan Con Thigibh A’ So ‘S Gheibh Sibh Feòil Supporter Full Member Minuteman Mar 3, 2009 1,704 1,034 Harrisburg, PA Oct 5, 2019 #107 Oct 5, 2019 #107 Strongly recommend you go with Sierra Matchkings until you figure out other issues. They are the most consistent bullet with the highest tolerance for jump you will encounter. H4350 will probably be the best for your 243 for temperature stability
Strongly recommend you go with Sierra Matchkings until you figure out other issues. They are the most consistent bullet with the highest tolerance for jump you will encounter. H4350 will probably be the best for your 243 for temperature stability