-
Having trouble using the site?
Contact support
Rimfire Rifle Photos Thread
- Thread starter keith jones
- Start date
629-4,
That’s just the way it came. I’m guessing the wife’s is a newer generation at one? Hers has a thinner more squared off forend with the interchangeable parts and mine is much wider and a little heavier. Hers was also bought aftermarket. Originally it is a Mark II BRJ. Mine came this way factory. It’s basically a FV SR in the at one stock.
That’s just the way it came. I’m guessing the wife’s is a newer generation at one? Hers has a thinner more squared off forend with the interchangeable parts and mine is much wider and a little heavier. Hers was also bought aftermarket. Originally it is a Mark II BRJ. Mine came this way factory. It’s basically a FV SR in the at one stock.
Last edited:
Thanks. I would like to have the more vertical grip like yours for a 1910 Mexican Mauser but it’s not available in the pro Varmint and Boyd’s doesn’t seem interested in special orders.
I have the SH-4 4-16. I like it. Do you find that magnification above 16x is usable? I may get a second Arken and I am curious about the 6x24.
Thanks! Yeah, I just sponge painted the HMR stock with spray paint. Kinda used the Altus saltwater camo as inspiration.
Yes I do.
Some discussion and observation over here: https://www.snipershide.com/shooting/threads/the-arken-optics-thread-merged.6968543/post-9621391
I like your paint job as well. Just looked at those Altus patterns too, very nice.
Did you bed it? I've been debating wether to go with this or a chassis for my mkll.
Well, I had to do some tweeking but I think I have her fitting right now! Went to .92" Vortex PMR rings, a 20MOA rail, added zero stops (one had bum threads. Waiting on the replacement) to the cheek piece risers, and jettisoned the Weibad mini stock pad. Not hating on Weibad BTW. Just made the cheek piece wider and was pushing me off center and jacking with the scope image....
P.S. I don't think I can get the scope any closer to the barrel!
P.S. I don't think I can get the scope any closer to the barrel!
As per Badjujuu it's a KRG Bravo. The Sako TRG bipod slots right in.
The chassis was intended for my Remington 700 but it arrived around the same time as the Bergara and I just had to run it.
Finally getting a chance to give the new girl a whirl tomorrow..
Build list:
Kidd Receiver, 1.5lb single stage trigger, charge handle/guide rod/spring, 10 MOA pic rail, v-block, rear anchor
JWH Bolt
Summit Precision 16.1" CF threaded barrel
KRG 10/22 Bravo chassis
KRG full length ARCA rail
KRG minimalist spigot with Pic rail
KRG billet Adj LOP assembly
Arken SH4 Gen II 6-24x50 MOA
Warne mountain tech 34mm, 1.21" rings
Atlas CAL bipod
ADM Ti & FDE anno QD clamp
Hoptic USA pic rail level
Hoptic USA saddle blanket
Build list:
Kidd Receiver, 1.5lb single stage trigger, charge handle/guide rod/spring, 10 MOA pic rail, v-block, rear anchor
JWH Bolt
Summit Precision 16.1" CF threaded barrel
KRG 10/22 Bravo chassis
KRG full length ARCA rail
KRG minimalist spigot with Pic rail
KRG billet Adj LOP assembly
Arken SH4 Gen II 6-24x50 MOA
Warne mountain tech 34mm, 1.21" rings
Atlas CAL bipod
ADM Ti & FDE anno QD clamp
Hoptic USA pic rail level
Hoptic USA saddle blanket
Last edited:
NICE BUILD DESCRIPTION It's Above My Pay Grade
Last edited:
MY Charger Take Down.
Open Sight And Red dot PMAC Receiver .
This i my first time loading photos
Open Sight And Red dot PMAC Receiver .
This i my first time loading photos
Attachments
Last edited:
So, this isn't a CZ, Tikka or Voodoo but she is pretty and just about rdy for play. I have had trigger work done to just over 2# pull and put a Shaw helical barrel on last night. Got to get a scope on it but think I am going to put a red dot on her to play with a bit.
Looks like a plan that went together .
How long did it take you to complete the build and How much $$$$
I was reading some of your posts great job on the builds that you have . At my age all i can do is dream
Vudoo 360
22" MTU Bartlein
30 MOA
Triggertech 2 Stage Diamond
ZCO 527 with Spuhr 6601
Foundation Centurion
MDT Ckye double pull
Ghost-M (waiting for the TBAC 22 to get out of jail)
22" MTU Bartlein
30 MOA
Triggertech 2 Stage Diamond
ZCO 527 with Spuhr 6601
Foundation Centurion
MDT Ckye double pull
Ghost-M (waiting for the TBAC 22 to get out of jail)
That is gorgeous! I am really wanting to drop the Bergara in a WOOX Furiosa or ARC Xylo chassis. In the mean time I swapped this in to feed the need. May help, may not….
Downside? No 3 ounce trigger pull for me. What with the HEAVY striker spring in the B14R 1 pound is as low as it will go.
Last edited:
These things are like potato chips. You just can’t stop at one 
@nikonNUT, where is the balance point on this set up? I wanting to get a CF Bergara for my 8 year old because of the weight, but I'm worried it may be a little too rear heavy.Well, I had to do some tweeking but I think I have her fitting right now! Went to .92" Vortex PMR rings, a 20MOA rail, added zero stops (one had bum threads. Waiting on the replacement) to the cheek piece risers, and jettisoned the Weibad mini stock pad. Not hating on Weibad BTW. Just made the cheek piece wider and was pushing me off center and jacking with the scope image....
View attachment 7676930
P.S. I don't think I can get the scope any closer to the barrel!
@smrkovsky I think a picture is worth 1000 words so...
Full disclosure. I flipped the bolt handle up to keep it from tipping to the right side (and may have biased the balance point the rear a VERY small amount) but you get the idea The big honking scope probably doesn't help but she seems spot on to me!
Full disclosure. I flipped the bolt handle up to keep it from tipping to the right side (and may have biased the balance point the rear a VERY small amount) but you get the idea
The big honking scope probably doesn't help but she seems spot on to me!
Last edited:
Bergara B14R Carbon Fibre 18” .22LR
MDT 20 MOA rail
MDT rings
NF SHV 4-14 MIL/ MIL-R
AICS 2.0
KAC NV bridge
Atlas CAL
MDT 20 MOA rail
MDT rings
NF SHV 4-14 MIL/ MIL-R
AICS 2.0
KAC NV bridge
Atlas CAL
Vudoo V-22 (Gen 1)
Shillen Ratchet R0 Contour 23.5"
Timney 2 stage flat shoe
Manners T4-A - Mini chassis- Team fill - Badlands camo - Area 419 Arcalock 12"
Nightforce NX8 4-32 FFP
Shillen Ratchet R0 Contour 23.5"
Timney 2 stage flat shoe
Manners T4-A - Mini chassis- Team fill - Badlands camo - Area 419 Arcalock 12"
Nightforce NX8 4-32 FFP
This is perfect. I guess a steel barrel would shift the balance point slightly to the muzzle side. Thank you@smrkovsky I think a picture is worth 1000 words so...
View attachment 7687276
View attachment 7687277
Full disclosure. I flipped the bolt handle up to keep it from tipping to the right side (and may have biased the balance point the rear a VERY small amount) but you get the idea
Amazon.com: Breakaway Nylon Coasters : Home & Kitchen
Buy Breakaway Nylon Coasters: Coasters - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
If you don't mind my asking, what length is the Fedderson? I have one in a Titan stock and have looking at the Bravo. Mine is 16" and if your's is the same it looks like a good fit.
New scope added To my CZ. Sold my vector taurus 5-30x56 and bought a Delta optics stryker hd in 4,5-30x56 With 34mm wheeler rings. The difference is huge! I thought the glass was good of my vector, it looked better then my friends diamondback tactical. But the Delta.. it’s a very big step up! Cant wait to shoot it next thursday! I‘m still waiting on my MDT acc chassis In white, should be here within 2 months. 
I went old school at my practice session today. CZ452 Varminter purchased new in 1996. SWFA SS 16x42 MIL/MIL. DIP 25MOA rail. Shot Aguila SV ELEY prime. Combo was good out to 226 yards today on an 8x11 steel in variable winds. Fun day.
