Rimfire Rifle Photos Thread
- Thread starter keith jones
- Start date
I have a blast with the rifle. Shoots very well and is always getting looks when out shooting. They make a great suppressor base as well, that and being as they can take 90% of 10/22 parts it is easy to find parts.
Lakeside machine razorback X1. http://i968.photobucket.com/albums/ae170/deserteaglexxx/IMG_0462.mp4
Last edited:
Pws t3 summit
Falcon 4-14x44 ffp scope
Boyds tacticool stock
Home done paint job
Harris bi pod
Silencer co sparrow
Falcon 4-14x44 ffp scope
Boyds tacticool stock
Home done paint job
Harris bi pod
Silencer co sparrow
My 10/22
Factory receiver
Tony kidd internals & trigger
Yhm barrel
Boyds laminate stock
Meuller apv optic
Swr spectre can
Also made a brake for it
Sent from my Galaxy Nexus
Factory receiver
Tony kidd internals & trigger
Yhm barrel
Boyds laminate stock
Meuller apv optic
Swr spectre can
Also made a brake for it
Sent from my Galaxy Nexus
Last edited:
My son's Savage started developing surface rust a few weeks after we got it as a brand new rifle. Since he is gone for the weekend figured I'd take care of that problem for him.
Here's mine. It's a Volquartsen in a McMillan HTG stock. The Nikon works just perfect for this little rimfire. I have it zeroed at 50 yards with Wolf Extra. and holdover two dots for 100 yards. Kinda of got the bug for these rimfire rifles after many years of centerfire rifles. Thinking of a CZ 455 next.
My Underground Skunkworks 323 (BlackOps).
NICE! Would love to see some more pics of the action! This makes the wait for a 605 even harder.
Last edited:
The 323 and 605 are different actions I believe. There were six 323 prototypes built but it never went to production. The 605 is based on the Rem 700 platform, so stocks are more available. The 323 is not, therefore the amount of stock choices was limited and Mike had to start with a blank stock and inlet it completely by hand.
The 605 is an amazing action, if I didn't already have this one I'd be getting a Ravage built on the 605.
Correct they are different, I have never seen any pics of the 323 before so I was just trying to see some of the action area. Nice rifle btw.
The 323 was based off a Cooper action if im not mistakenMy Underground Skunkworks 323 (BlackOps).
I was on the list to get one but ended up getting a CZ 455 PT instead
may not be as good as the 323 but it does what I want it to do so im happy with it
Just got it back from GAP today and can't wait to get to the range! I hope it shoots as good as it feels and looks.
Just got it back from GAP today and can't wait to get to the range! I hope it shoots as good as it feels and looks.
Is that the stock barrel? It looks heavier than the stock barrel or is it just me? Thanks
Ben
Rimmys
M&P 15-22 performance center.... With bushnell trophy red dot.... Not my first choice of reddots but I had it already and it was lonely.... Very impressed with the gun... Very accurate...not all that impressed with the red dot..... I may scope the rifle later... But right now it's my critter killer
Why it's upside down, only apple will know.....
Next one is my browning buckmark bull barrel rifle with leupold varix1 3-9..... Wonderful flawless accurate rifle. Well balanced and very easy to handle.
M&P 15-22 performance center.... With bushnell trophy red dot.... Not my first choice of reddots but I had it already and it was lonely.... Very impressed with the gun... Very accurate...not all that impressed with the red dot..... I may scope the rifle later... But right now it's my critter killer
Why it's upside down, only apple will know.....
Next one is my browning buckmark bull barrel rifle with leupold varix1 3-9..... Wonderful flawless accurate rifle. Well balanced and very easy to handle.
Attachments
Last edited:
That is a slick setup, do you have any info on the stock conversion?
.22LR Remington MSR using a Savage MKII F
Licensed by Remington
Full CNC machined
Metal Body
Monolithic Upper Rail
Modular Front Assembly
Folding Stock
Adjustable Cheek Rest
Adjustable Butt Pad
i got lucky and found one used for $400 on craigslist
used an angle grinder and dremel to fit the Savage MKII action/barrel inside.
its easier if you have access to a milling machine or lathe
had to use some epoxy putty in the magwell area to help bed the action
the savage MKII trigger came up short so you will need to weld a trigger to extend it downward into the MSR trigger area
this is a pre order at $599
Ares Full Metal Remington MSR Airsoft Gun ( Black / Licensed ) by:
Last edited:
So you have as much in an Airsoft/Savage Mock up as a CZ455 PT or used Anschutz. Sure as hell hope it shoots great. Guess as long as it looks tacticool that is all that matters.
Dont make fun.
I know they arent tactical or long range trainers but they are a challenge to shoot.
CZ425 2oz factory trigger, benchmark barrel, Don Stith stock
SPF Myers top load action, Jewel trigger, Lilja barrel, McMillan Edge stock
5 shot groups at 50 yards.
I know they arent tactical or long range trainers but they are a challenge to shoot.
CZ425 2oz factory trigger, benchmark barrel, Don Stith stock
SPF Myers top load action, Jewel trigger, Lilja barrel, McMillan Edge stock
5 shot groups at 50 yards.
My finished benchrest rifle
Action: Kimber 82G
Barrel: Kimber 82G
Trigger Kimber 82G
Stock: Laminate Benchrest style
Scope: Weaver 36T
Rings: Leopold
Sanded, Channeled, Bedded, Pillared the stock and added 5 coats of Candy Purple and 8 coats of clear. Wet sanded up to 2500 grit and polished to a piano shine. Tested it this weekend and its a tackdriver for sure.
IMG_7321 by usmcchet92_96, on Flickr
IMG_7320 by usmcchet92_96, on Flickr
IMG_7319 by usmcchet92_96, on Flickr
IMG_7318 by usmcchet92_96, on Flickr
IMG_7317 by usmcchet92_96, on Flickr
IMG_7315 by usmcchet92_96, on Flickr
IMG_7314 by usmcchet92_96, on Flickr
IMG_7313 by usmcchet92_96, on Flickr
IMG_7311 by usmcchet92_96, on Flickr
IMG_7310 by usmcchet92_96, on Flickr
Its not perfect and there are mistakes but Ive learned alot doing this rifle and Im looking forward to doing another one
Action: Kimber 82G
Barrel: Kimber 82G
Trigger Kimber 82G
Stock: Laminate Benchrest style
Scope: Weaver 36T
Rings: Leopold
Sanded, Channeled, Bedded, Pillared the stock and added 5 coats of Candy Purple and 8 coats of clear. Wet sanded up to 2500 grit and polished to a piano shine. Tested it this weekend and its a tackdriver for sure.
IMG_7321 by usmcchet92_96, on Flickr
IMG_7320 by usmcchet92_96, on Flickr
IMG_7319 by usmcchet92_96, on Flickr
IMG_7318 by usmcchet92_96, on Flickr
IMG_7317 by usmcchet92_96, on Flickr
IMG_7315 by usmcchet92_96, on Flickr
IMG_7314 by usmcchet92_96, on Flickr
IMG_7313 by usmcchet92_96, on Flickr
IMG_7311 by usmcchet92_96, on Flickr
IMG_7310 by usmcchet92_96, on Flickr
Its not perfect and there are mistakes but Ive learned alot doing this rifle and Im looking forward to doing another one
Oh my, you are far too modest. Those are some fantastic rifles there. Very well done indeed.
Thanks. Dont care for the McMillan stock so I have a Claro walnut blank at the stock makers.
Dont make fun.
I know they arent tactical or long range trainers but they are a challenge to shoot.
CZ425 2oz factory trigger, benchmark barrel, Don Stith stock
SPF Myers top load action, Jewel trigger, Lilja barrel, McMillan Edge stock
5 shot groups at 50 yards.
Who did you have re-barrel your CZ 452? I am considering having my 452 re-barreled.
Ben
Ben,
I bought the rifle used as a basket case. I was told the smith was Billy Martin. I do not know if this is true or not.
I would ask the folks you plan on getting your barrel from who they would recommend.
Matt.
I bought the rifle used as a basket case. I was told the smith was Billy Martin. I do not know if this is true or not.
I would ask the folks you plan on getting your barrel from who they would recommend.
Matt.
MR Spradlin I would never make fun of a work of art and what only can be described as an absolute hammer. You spent your money wisely. So did Chet.
Thank you sir.
Started out shooting NRA 4 position thru 4-H with an old Remington 513T my dad built for me. Still have it and always enjoyed shooting .22lr
cz 455 22 WMR
glass bedded
timney trigger
leupold scope
dime size 5 shot groups at 50 yrds!
glass bedded
timney trigger
leupold scope
dime size 5 shot groups at 50 yrds!
Attachments
Last edited:
Tank all that i can say beautiful
who painted the stock, if you dont mind me asking, that camo is what i have been spending sleepless night to find, and did i say beautiful
the whole color schem spot on,
thanks for sharing
who painted the stock, if you dont mind me asking, that camo is what i have been spending sleepless night to find, and did i say beautiful
the whole color schem spot on,
thanks for sharing
Here's my Anschutz moving target rifle:
And here's my shootingbuddys Olympic gold medal winning rifle from the '88 Olympics in Seoul, Korea. Walther with Nickel 4-16x56 twin post scope. Pretty isn't it
:
Both rifles have shot more than 100k rounds.
And here's my shootingbuddys Olympic gold medal winning rifle from the '88 Olympics in Seoul, Korea. Walther with Nickel 4-16x56 twin post scope. Pretty isn't it
:
Both rifles have shot more than 100k rounds.
Last edited:
Similar threads
