-
Having trouble using the site?
Contact support
Ruger Precision Rimfire
- Thread starter t8500shx
- Start date
Hey guys.. so i finished off my rifle fixes.. today.. i was really suprised to see how dirty the barrel was.. patched it like.. 30 times.. it was dirtier than my other ruger rimfire after putting 100 rounds through it.. odd.. i added a washer to the mag release tab on the other side of the pin/ejector and its nice and snug now.. so happy with that.. flushed the trigger and cleaned up the barrel thread burrs.. i think its now at about what i woulf have expected from a new rifle.. havent put a round through it yet but will in the next few days.. 6 different rounds to try.. wish me luck..!!
Hey mate.. didnt take any pics during the process.. not really a pic guy.. pretty much just cleaned up the imprefections.. wouldnt say mods.. unless adding a washer is a mod lol
Oh super newb thing to pay attention to, when changing the grip remember it's a plastic chassis, so no need to muscle down the bolt cause you will strip it. Easily. Lesson learned today had to take it to get tapped for new threads ??
Burris Xtreme Tactical Signature Picatinny-Style Medium 30mm Rings. Measures 1" from base of the mount to center of the ring mounts. The high mount is 1.25" to the center.
Just installed my green mountain barrel last night. Will have a report this weekend.
If you didn't received an addendum page on how to attach the barreled action to the stock then you have a Gen II stock.
I run with a MPA EVG Grip (Enhanced Vertical Grip) from MasterPiece Arms. Required some filing to fit but I love both the vertical grip and the trigger finger rest. I wouldn't use that is you are planning on shooting off hand though.
I'm using Burris Xtreme Tactical Signature Picatinny-Style Medium 30mm Rings. They measure 1" from base of the mount to center of the mount. With a SWFA 20x42 fixed focus scope I have a a millimeter or two of wiggle room for the scope's objective bell.
ok so im assuming that i can get away with medium size rings then..? Also I know a few other people have mentioned things about the mag as well and was wondering if anyone has any fixes for it? my 15rd mag is very loose in the magwell and has quite abit of play to it. The normal 10/22 bx 10rd mags fit nicely and are easy to insert and remove. Anyone else got this issue?
I would think that medium height rings would work. The loose fitting BX15 is a well known issue. I've heard that that are after market magizine release plunger springs that help. I've also read that someone used a washer to tighten up that plunger. Some even use tape or JB Weld to build up the front of the magazine (I wouldn't recommend that unless you're an artist!). I didn't use the BX15 because the ranges I go to have a 6 round in the magizine rule. I've got a bunch of 10 round magazines that I use instead.
Seems like abit of an oversite on rugers behalf.. meh.. "for looks mag now".. lol.. i used a washer on the mag release to tighten the side to side motion that the release was making.. allot more positive now.. i think im with you on the bx1s.. they fit great.
The posting didn't elaborate other than stating "match". I have one of GM's barrels that has a Bentz chamber and it appears that the RPRR replacement barrel's chamber is tighter.
So far accuracy on my factory RPRR has been great with most all 50yd groups between .5- .6in. After zeroing at 100yds I shot this orange colored 4in plate @ 200yds with 3 shots about 2 1/4- 2 1/2in.
Here's some 50yd pics and the 200yd steel plate.
Bushnell Engage 4-16x44
Burris Extreme Rings
30 moa factory rail
Shot off sand bags
Here's some 50yd pics and the 200yd steel plate.
Bushnell Engage 4-16x44
Burris Extreme Rings
30 moa factory rail
Shot off sand bags
Attachments
What are your thoughts on the cci stingers?.. reason i ask is that if you read through the manual it specifically states not to use "stinger" ammunition in this rifle.. not sure how much of a difference it makes.. but its there..
I wouldn't shoot stingers out on any barrel that is not chambered for them. The stinger's case is longer with a smaller bullit that allows it to be shot from a .22LR. The longer casing may damage the throat of the barrel. Additionally the 1 in 16 twist rifling is too fast; I'm sure that you would shoot the barrel out much quicker than if you use standard or HV rounds. That's why GM produces a barrel for the 10/22 chambered for specifically for stingers with a 1 in 9 twist rifling. That's my $.02 worth
Nice man thanks for the reply.. i didnt know about the longer case in the stingers.. makes complete sense.. is the problem the case dosent sit properly in the throat or does it protrude into the barrel itself?..I wouldn't shoot stingers out on any barrel that is not chambered for them. The stinger's case is longer with a smaller bullit that allows it to be shot from a .22LR. The longer casing may damage the throat of the barrel. Additionally the 1 in 16 twist rifling is too fast; I'm sure that you would shoot the barrel out much quicker than if you use standard or HV rounds. That's why GM produces a barrel for the 10/22 chambered for specifically for stingers with a 1 in 9 twist rifling. That's my $.02 worth
As you can see in the photograph the stinger and the standard 22LR are the same size. The difference is the stinger's case extend up to where the standard's bearing band. It is the bearing band that first comes in contact with the barrel's throat lead and that throat lead is where the bullit engages the rifling. Damaging this area of the barrel will have an adverse effect on the rifle's accuracy. Again I'll state for the record I've only been in this game for a year. The information I'm passing on here is based on what I've read. And like the saying goes "opinions are like ... everyone haste one." I'm quite sure if I got this wrong someone on this forum will set me straight.
It's my understanding from all that I've read over the years is that because of the longer case that the Stinger's have, they should not be used in any Target or Match barrels due to tighter tolerances such barrels have. There doesn't seems to be such a problem when Stinger's are used in standard factory barrels. I've fired them in various Ruger guns (e.g. 10/22, American .22LR, Mark III and SR22) with no issues. With my standard 10/22 with it's 18.5in barrel I get MV's between 1500 and 1550. As suggested before/above, it seems to me that higher velocities like this would tend to wear on any barrel more than the lower velocities do.
I'm glad you asked, I called Ruger the other day as this was a concern of mine as well. They told me that this particular rifle does not have a match chamber so it would be fine to shoot the CCI Stinger.
The main issue I believe is in semi automatics and barrels with really tight match chamber tolerances.
Hope this helps
That is very interesting and its fine that your a year in as i am just getting into "the game" lol. it would definitely hold some truth to damaging the throat of the rifle especially since the longer casing will insert further damaging the barrel and creating imperfections in the contact surface with the bullet. In theory this damage (if enough of it) could put off the centre of gravity on the bullet..? I am thinking out aloud here..
As you can see in the photograph the stinger and the standard 22LR are the same size. The difference is the stinger's case extend up to where the standard's bearing band. It is the bearing band that first comes in contact with the barrel's throat lead and that throat lead is where the bullit engages the rifling. Damaging this area of the barrel will have an adverse effect on the rifle's accuracy. Again I'll state for the record I've only been in this game for a year. The information I'm passing on here is based on what I've read. And like the saying goes "opinions are like ... everyone haste one." I'm quite sure if I got this wrong someone on this forum will set me straight.
but you do have me asking allot of other questions about bullet stabilisation and correct rifling, as well as the effects a damaged throat could have on this relationship.
As mentioned earlier, what I got from Ruger was that the case length is more of a reliability/injury issue.
In tighter match chambers this may not allow the bolt to fully close. If that happens it will affect cycling and possibly cause injury.
The Ruger Precision rimfire does not have a match chamber, therefore, it is safe to fire Stingers.
In my experience it is also extremely accurate with Stingers. If you still feel uncomfortable shooting these rounds and want something close , there is CCI Velocitor ammunition that has is shorter case length.
Hope this helps guys.
In tighter match chambers this may not allow the bolt to fully close. If that happens it will affect cycling and possibly cause injury.
The Ruger Precision rimfire does not have a match chamber, therefore, it is safe to fire Stingers.
In my experience it is also extremely accurate with Stingers. If you still feel uncomfortable shooting these rounds and want something close , there is CCI Velocitor ammunition that has is shorter case length.
Hope this helps guys.
Yeah sweet man. Thanks for the info. Always good to see someone contact the company and ask the question. I wasnt discrediting your information i was simply rolling with the thought process and diving down the rabbit hole lol.. i probably wont use the stingers but i havent really run many loads through my rifle so still dont know what she likes.
I wouldn't shoot stingers out on any barrel that is not chambered for them. The stinger's case is longer with a smaller bullit that allows it to be shot from a .22LR. The longer casing may damage the throat of the barrel. Additionally the 1 in 16 twist rifling is too fast; I'm sure that you would shoot the barrel out much quicker than if you use standard or HV rounds. That's why GM produces a barrel for the 10/22 chambered for specifically for stingers with a 1 in 9 twist rifling. That's my $.02 worth
a 1 in 16 twist is slower than a 1 in 9
Yep you're correct. A 1 in 16 is slower than a 1 in 9. Thanks for setting the record straight.
I wouldn't shoot stingers out on any barrel that is not chambered for them. The stinger's case is longer with a smaller bullit that allows it to be shot from a .22LR. The longer casing may damage the throat of the barrel. Additionally the 1 in 16 twist rifling is too fast; I'm sure that you would shoot the barrel out much quicker than if you use standard or HV rounds. That's why GM produces a barrel for the 10/22 chambered for specifically for stingers with a 1 in 9 twist rifling. That's my $.02 worth
Another thing with twist rates is generally you need a faster twist for heavier bullets. So a 1 in 9 twist would not be a recommended twist for the lighter weight stinger. I think you misunderstood what you read on GM. They have a stinger chambered barrel but is in a 1 in 18 twist. The 1 in 9 twist GM lists is used for sub sonic rounds to help stabilize the slower heavier bullet weights.
im hoping to have a video review of this rifle in the next week or so....
look forward to seeing it, is stock or does it have an upgraded barrel?im hoping to have a video review of this rifle in the next week or so....
American Rifleman did a review for their September 2018 issue as well guys.
Their results were consitant with what I've been seeing and hearing, great accuracy.
Their results were consitant with what I've been seeing and hearing, great accuracy.
Very good information.. i will definately keep this in mind when looking for bullets.. cheers.
