Gunsmithing Self built chassis is done!

#11
Re: Self built chassis is done!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dareposte</div><div class="ubbcode-body">Wow really sweet, and nice machine work. Who did your anodizing? How did you cut the bedding for the rifle? Did you use a bedding block or is it all integrated? </div></div>

A local shop did the anodizing. The action area was machined using a small ball end mill and incremental steps to create a larger radius (have a book with the formulas in it). The chassis is one solid block, but the piece holding the forend tube comes off to give access to the barrel so it can switch out. I have another barrel in 260 (shown is 308)
 
#13
Re: Self built chassis is done!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cm92</div><div class="ubbcode-body">yes thats the area was talking about. In the second pic it appears to have a rounded edge. </div></div>

I did the final finish work by hand, sanding out the light tool marks and breaking all the sharp edges, so it is slightly round, but not machined that way.
 
#16
Re: Self built chassis is done!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cm92</div><div class="ubbcode-body">also how are you rounding the edge on the trigger guard? a router bit or something? </div></div>

CNC handfile hahahaaha
 
#17
Re: Self built chassis is done!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 257speed</div><div class="ubbcode-body"> ... The action area was machined using a small ball end mill and incremental steps to create a larger radius (have a book with the formulas in it)
... </div></div>

Very impressive, I would never have thought to try that. I run a CNC on occasion with a ball end but the stepovers are like 0.010" for the finishing passes, I'd never have the patience to do that on a manual machine. Kudos and great work.
 
#28
Re: Self built chassis is done!

thats damned nice i don't think i have the patience to do that on a manual mill but if i did it on a CNC mill i would have to watch it throughout the process because i wouldn't have enough cofidence in my programing skills to let it go on its own
 
You must log in or register to reply here.

Similar threads

F
2024 Legion Memorial Run and Gun, Honoring the Fallen as a Family
Replies
9
Views
704
FatBoy
F
Glassaholic
Rifle Scopes Alpha Class High Magnification 6-36/7-35 FFP Scope Review
Replies
121
Views
7K
VikingSinEater
V
U
SOLD PIGlite-CF4 Carbon Fiber Shooting Tripod w/ HOG Saddle® MOD 7
Replies
4
Views
625
USMC22
U
Glassaholic
Rifle Scopes March FFP 1.5-15x42 MPVO Review and Comparison (w/ Nightforce and Athlon)
Replies
246
Views
34K
Meir Sigal
Meir Sigal
NFAJohn
Regular guy assembles TL3, doesn't kill self
Replies
25
Views
2K
sierracharlie338
sierracharlie338
Top Bottom
Back
Home
Forums
Merch
Alerts
You must be at least 18 years of age to use this site
You confirm that you are at least 18 years of age by continuing to use the site.