-
Having trouble using the site?
Contact support
Silencer Central suppressors don't buy
- Thread starter nmscuba
- Start date
No. It says "rimfire and rifle calibers." That necessarily excludes everything else.
I saw a very well respected (and expensive) 30 cal suppressor ruined when it was screwed on a discount 300 blackout pistol ar barrel, after channel locks and three grown men were used to remove the flash hider. Any sane human could see the can was crooked when they screwed it on but the threads were the right size right? While destroying the suppressor the expert in the group was sure the reason it was shooting 10 feet left of the target was because the bullets were tumbling due to using subs. I couldn’t take it anymore and left the range. I will almost guarantee the owner claimed warranty. Nothing is surprising anymore, which is sad.
Kyle
Kyle
Home
Buy a complete AR 15 pistol at the best price with fast shipping and industry-leading customer service. AR9, 300 blackout pistol, ar15 pistol and more.
www.primaryarms.com
Godamit so much thats what I get for not reading every post. Doh
Um... A 9mm in an rifle does not make it a "rifle caliber." It's still a pistol caliber.
It states rimfire to rifle calibers to .300 weatherby. The "rifle calibers" is the important part here.
Does it really need to state rifle or pistol?
Its a 30 cal can. 9mm doesn’t fit through a 30 cal can. That’s all that truly matters here
Its a 30 cal can. 9mm doesn’t fit through a 30 cal can. That’s all that truly matters here
Depends on whether you're in the upstairs room or the downstairs.
We don't account for door/curtain leakage...
Last edited:
OP, @nmscuba
I'm so very proud of you.
You somehow made the mismatched threads line up without seeking advice from the vendor, fellow shooters, or anyone really. That shows great initiative and slight ingenuity.
Since you managed to squeeze 8-9 9mm rounds down the pipe... well it sounds like you have a new 9mm suppressor. Good on you for "making it fit" and saving money on having to buy another suppressor. The asshats here that are trying to make you feel bad are just jealous that they've pissed away cash on multiple pistol and rifle suppressors, and your one-size-fits-all solution never truly occured to them.
Since your warranty is nil, may as well continue bubba'ing (modifying) away on your frankenstein; but beware of caps or baffles that come off, since no one but the ATF (sometimes) comprehends what constitutes an illegal suppressor part. I highly recommend you immediately rename and repurpose any parts that may have flown off and remain in your possession (e.g. "vasco-pulmonary carborator filter")
In all seriousness, Silencer Central will not help you because you did not heed their instructions; but we BOTH know real men don't read instructions, we just DO stuff. Who needs warranties anyways, poors? HA!
Please send a photo of your creation. I too want a truly multicaliber suppressor.
Sincerely,
Sammich
It's one of those metric conversion issues like what happened to the Hubble Telescope. Not the OP's fault, it is the fault of those here in the USA that refuse to comply with the metric system. If we would call .30 cal 7.62mm like the rest of the world, this unfortunate state of affairs might have been avoided. Even first graders in the EU understand that 7.62<9. In fact, even most idiots here in the USA understand that 7.62<9. However, even so-called astute folks, like those building a multi-billion dollar space telescope, can get confused understanding that .30 cal < 9 mm.
Can someone help me find the sarcasm font function?
By the way...if you leave off the decimal point... 30 cal is, indeed, larger than 9mm.
Missed your post, must have been looking at your pictures in the motivational thread.
you bring up a valid point that would likely confuse anyone who was brought up on common core math. but than again anything that has numbers in it confuses someone brought up on common core math.
"Refuse to comply with the metric system?"
What in the holy hell is that suppose to mean?
Did the Goobermint create some mandatory compliance EO/Law?
Did they forget to tell us?
Maybe they wrote it in MOA instead of MILs.
Fuck!! Now I'm corn fuzed.
What in the holy hell is that suppose to mean?
Did the Goobermint create some mandatory compliance EO/Law?
Did they forget to tell us?
Maybe they wrote it in MOA instead of MILs.
Fuck!! Now I'm corn fuzed.
Wow. The OP may be the dumbest person on this suppressor forum, but a few of the other commenters here are pretty close. (Not talking about those being sarcastic.) IMO stupidity should hurt and the OP got off easy.
As to how he did it - typical 30 cal cans are 5/8-24 thread, and 9mm pistols are 1/2-28. Adapters between those two threads are available from a number of different sources, I don’t see anything surprising about being able to physically attach the two.
As to how he did it - typical 30 cal cans are 5/8-24 thread, and 9mm pistols are 1/2-28. Adapters between those two threads are available from a number of different sources, I don’t see anything surprising about being able to physically attach the two.
That should have been his first clue...
It truly surprises me how many people have tons of discretionary funds, but they severely lack intelligence and common sense.
Really want to see the pic of the suppressor after shooting 9mm through it.
Now I know where the Tide pods went....
Now I know where the Tide pods went....
Sure, but due to the CLEO notification process after approval, it can take almost a month after ATF approval for the customer to have the supressor in hand. I only have anecdotal evidence for this in the form of 2 friends' experience with them.
I'll have first hand knowledge soon as I currently have a can from them in jail.
Sure, but due to the CLEO notification process after approval, it can take almost a month after ATF approval for the customer to have the supressor in hand. I only have anecdotal evidence for this in the form of 2 friends' experience with them.
While the CLEO for your jurisdiction must be notified, there is no action required on his behalf:
Is the chief law enforcement officer required to sign the law enforcement certification on ATF Form 1 or ATF Form 4? | Bureau of Alcohol, Tobacco, Firearms and Explosives
No. Effective July 13, 2016, the final rule “Machineguns, Destructive Devices and Certain Other Firearms; Background Checks for Responsible Persons of a Trust or Legal Entity With Respect to Making or Transferring a Firearm” amends the regulations to eliminate the requirement for a certification...
It's not clear what causes the delay between approval and stamp-in-hand, but this ain't it.
Which silencer company has the best warranty?
I want to use a .22 rifle muffler on my .45 cal CZ97 because it’s too loud to shoot in the living room. Is there a special adapter needed to attach this?
I can thread my own barrel no problem because my dad was a plumber and have lots of pipe thread dies that might fit. I have some special tacticool oil for this task that will make sure the job is done perfect.
My brother’s cousin’s sister’s husband said it would work as long as I broke it in first with steel core penetrator bullets. He knows this because he was a Special Forces Green Beret Ranger Seal Team 6 operator in ‘Nam.
I want to use a .22 rifle muffler on my .45 cal CZ97 because it’s too loud to shoot in the living room. Is there a special adapter needed to attach this?
I can thread my own barrel no problem because my dad was a plumber and have lots of pipe thread dies that might fit. I have some special tacticool oil for this task that will make sure the job is done perfect.
My brother’s cousin’s sister’s husband said it would work as long as I broke it in first with steel core penetrator bullets. He knows this because he was a Special Forces Green Beret Ranger Seal Team 6 operator in ‘Nam.
Correct, something is causing a delay and this was their (Silencer Central's) answer that it "could take some time to recieve confirmation the CLEO is notified."While the CLEO for your jurisdiction must be notified, there is no action required on his behalf:
Is the chief law enforcement officer required to sign the law enforcement certification on ATF Form 1 or ATF Form 4? | Bureau of Alcohol, Tobacco, Firearms and Explosives
No. Effective July 13, 2016, the final rule “Machineguns, Destructive Devices and Certain Other Firearms; Background Checks for Responsible Persons of a Trust or Legal Entity With Respect to Making or Transferring a Firearm” amends the regulations to eliminate the requirement for a certification...www.atf.gov
It's not clear what causes the delay between approval and stamp-in-hand, but this ain't it.
After talking with the ATF examiner last week over an issue with my local dealer that has caused all sorts of BS and confusion, the conversation went to the 2 of my first 3 stamp approvals. She said that they send them out in batches to the dealers, and not immediately upon approval. So, I’m guessing that could be what causes the delay. Some folks might have been approved closer or farther away from the date the stamps got sent. So I’m guessing this is what reflects the fluctuations in “stamp-in-hand” times.
The most recent claim is that examiners are working from home, and they only go into the office every ~2 weeks to drop off approved forms. That makes sense, but doesn't explain why this has been going on since well before the pandemic.
One can speculate to his heart's content as to what the real cause is, but it doesn't change the fact that this is basically an established part of the waiting game.
One can speculate to his heart's content as to what the real cause is, but it doesn't change the fact that this is basically an established part of the waiting game.
I have a Varminter 3.0 I've used a few years now. I used it at Marc and Frank's class this year, I was very satisfied with how it has performed. I also have a Coastal Guns 7.62 supressor, it's a heavy bastard but built like a tank. I got them both from Silencer Central when they were Dakota Silencer. I was very satisfied how easy they make all the red tape. I'll use them again when I get to that point again.
1st post since joining in 2012
I’m thinking frank has created a cache of accounts just to bring up after a while, post something completely retarded and let us have our fun and burn our best memes and energy on them. Takes a bit off the other new guys
If this a legit post then please don’t think all of us from Northern Michigan are this stupid
OP if this is serious, which I doubt it is, your suppressor isn’t rated for a pistol because a 9/40/45 cal won’t fit through a 30 cal hole (9 rounds later and it may fit now) If this doesn’t make sense try putting your wedding ring on your cock and it should clarify the situation
This is very possibly the damn funniest and memographical response I have ever seen! lol, kudos!
I’m thinking frank has created a cache of accounts just to bring up after a while, post something completely retarded and let us have our fun and burn our best memes and energy on them. Takes a bit off the other new guys
If this a legit post then please don’t think all of us from Northern Michigan are this stupid
OP if this is serious, which I doubt it is, your suppressor isn’t rated for a pistol because a 9/40/45 cal won’t fit through a 30 cal hole (9 rounds later and it may fit now) If this doesn’t make sense try putting your wedding ring on your cock and it should clarify the situation
This is very possibly the damn funniest and memographical response I have ever seen! lol, kudos!
Well, when the shoe don’t fit….surprised you didn’t learn one of those life lessons which involve a lot of pain and a trip to the ER.
No kidding though. Asking the right questions after a bit of research would have gotten you the answers you needed. Relying on a sales person to read your mind or expect that you don’t have a clue about calibers and threading differences on weapons you obviously didn’t tell him/her about is using hope as a tactic.
Putting just enough fuel in an airplane to run it till the wheels touch down means a nasty crash eventually.
So you join the Hide today and make two posts. Both of which are busting the OP's balls. Classy.
You say you're from northern MI. Let me guess, Mancelona? Birthplace of the toothbrush. Had it been invented anywhere else, it would be called a teethbrush.
Ummm, no. Not MI. And, you should look at 1. The OP and 2. The post I quoted. Actually had little to do with the original post. Second post did. This is pretty obviously a troll post and not for real. How do I know? The OP didn’t mention a hospital stay being involved.
Also, your first post to a new member shows you didn’t read the post/comment, nor the thread. Seems like you just want to either start a fight, run your mouth, or just be disagreeable.
Have a nice day and remember, it only takes one shot.
#1 " If this a legit post then please don’t think all of us from Northern Michigan are this stupid " Your words, not mine.Ummm, no. Not MI. And, you should look at 1. The OP and 2. The post I quoted. Actually had little to do with the original post. Second post did. This is pretty obviously a troll post and not for real. How do I know? The OP didn’t mention a hospital stay being involved.
Also, your first post to a new member shows you didn’t read the post/comment, nor the thread. Seems like you just want to either start a fight, run your mouth, or just be disagreeable.
Have a nice day and remember, it only takes one shot.
#2 I read your posts and reached the conclusion that you like to hear yourself talk.
#3 " Have a nice day and remember, it only takes one shot.
" If that's a threat, you're even dumber than I thought. 
- Nov 3, 2010
- 9,719
- 20,445
Uh, you really need to learn how to read. Not my post. You miss-clicked. Go back and try again. Not my post you are ranting about.#1 " If this a legit post then please don’t think all of us from Northern Michigan are this stupid " Your words, not mine.
#2 I read your posts and reached the conclusion that you like to hear yourself talk.
#3 " Have a nice day and remember, it only takes one shot.
And, that comment is pretty well know among shooters. Sniper bar, it only takes one shot. And your quote number one isn’t from any post I made. Sooooo….if your intent was to show everyone that you can’t distinguish between who posts what, you have succeeded! Not to mention being an ass. Wonder why people get the impression that forums are unfriendly. Check yourself.
One more thing, the post I quoted was by click and paste. To remove your confusion. Go back in the thread and see for yourself. Original post (which I copy/pasted wasn’t my post.
And, if you ACTUALLY READ IT it is pretty apparent what was being said by whom. But, you didn’t.
Which is why I thought it was your post. My mistake and I apologize.
You're still an ass.
Similar threads
Suppressors
Silencer central BOGO sale
