So, i got me an autotrickler set up a while back and powder would always bounce out of the pan. Not too often but often enough it would get aggravating.
Simple fix i came up with was to cut the finger off of a dr glove, and cut the tip off of it at the right distance to be just above the bottom of the pan a lil bit. Grabbed some trusty ol electric tape and taped that sucker to the dumper nipple.
Now out if 100 rnds loaded maybe 1 kernel or 2 may hit the scale
Simple fix i came up with was to cut the finger off of a dr glove, and cut the tip off of it at the right distance to be just above the bottom of the pan a lil bit. Grabbed some trusty ol electric tape and taped that sucker to the dumper nipple.
Now out if 100 rnds loaded maybe 1 kernel or 2 may hit the scale
