Re: Spuhr Mount feedback thread with pictures.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Spuhr</div><div class="ubbcode-body">You screw it into the bottom, not less not more.....
You Will not break or bend that screw, no chance.
There will not be the slightest mark on it, check with previous buyers of TRG and AI mounts here and check if anyone of them ever had any issues with it.
Håkan </div></div>
i was assuming you adjusted the screw from the bottom of the mount (because of the slotted head in the screw)...thus it would have to be taken off the gun to adjust and would be a little difficult to set perfect.
from the way you sound "screw it into the bottom" im assuming you put the mount on the gun and the hole/screw runs through to the top side...so you basically put the mount on, line up the lugs and holes, snug the mount, and then screw in the lug screw until it goes no further?
edit - nevermind about the above...just saw another pic and the lug holes dont run all the way through the mount.
so the lug just screws all the way in to a predetermined depth.