-
Having trouble using the site?
Contact support
Terminus Actions
- Thread starter Joel Russo
- Start date
The guys I know running remages in a terminus all turn this off in a lathe
There was talks with criterion about making some without the bolt nose recess but idk what came of it
Does anybody know where I could get a pre-fit for a Zeus that I have incoming in like a month or less wait time? Not sure If I should get one made or wait for a Proof to come in stock. Thanks
PVA has a rush option for $100 more. However, they have never come close to hitting a lead time for me so I probably wouldn’t even attempt it.
Anyone have any knowledge on the kratos 4" and what bottom metal, mag box or magazine will work?
I got one from PVA nad one from Bugholes and they both showed up pretty quick
I got a pre-fit barrel from PVA, paid the extra rush fee ($175 I think) and it shipped in 3 days
Check around. $175 for a few days rush is a lot. Some shops get them out within a week without it. Idk who currently with COVID does but I’m sure there are still some
If you are still looking. What do you want? I have some 6 & 6.5mm barrels in stock. I do not have a big backlog.
Chase
Just got my Zeus and I was wondering if the threads go together dry on the QC system or should I put a little lube on them? @Joel Russo
Put some anti-seize is what Joel told me. For the QC system, the set screws are 10 in/lbs.
Well shit. Next time ill switch my QD system to aint-seize instead of blue loctite
So for the QD system, we should grease/anti-seize the barrel threads but blue locktite the set screws?
No loctite. Not on the barrel and not on the QD screws.
Just picked up a used Zeus off the hide really impressed so far mine has the exposed cocking indicating pin on the back of the bolt head. Is that the only difference compared to the new ones I noticed the new actions have a full bolt shroud. Anyone have any trouble with dirt or other debris getting into the firing mechanism?
I think I read the reason he went away from the exposed firing pin was to limit the amount of dust and debris that got into the action.
FWIW I have 2 Zeus actions, the first ones @Joel Russo put out and they are the Quick Change with set screw type;
I have tried the "hand tight" barrel fitting and then locking with set screws it works and shoots fine.
I don't change barrels a lot and I'm thinking 58,000psi in front of my face so I choose to use an action wrench/barrel vice setup and have tried various torque settings - anywhere from 40-60ft/lb is a solid lock up. A nice little pop as barrel releases on removal without too much force on breaker bar/action wrench.
NB. Variation in headspace between hand tight and 40-50ft/lb is minimal and go/no go gauges and previous brass function fine for me at least.
Clean barrel tenon and action threads before you install/reinstall a barrel in the Zeus and apply a little bit of anti seize just to the barrel tenon threads, I use Permatex Aluminium Anti-Seize.
Tighten set screws hand tight (dry) and go shoot.
PS. I work with a lot of expensive carbon fibre parts - Tip on "hand tight hex screws" force; Use an L-shaped allen key set, long end in screw and torque with thumb and one finger on short arm of allen key. Smaller the key, shorter the arms so this minimises force applied and you'll never strip another small screw
For tenon threads
https://www.permatex.com/products/l...s-anti-seize/permatex-anti-seize-lubricant-4/
I have not run the long action but when I talked to @Joel Russo before his wait times were about 6 weeks and he just bought new machining for his shop to help increase production and reduce wait times
WOW...read your post a year and a half later and it's exactly what I'm getting from Curtis now. Same bolt issue, same lack of communication. I ordered a Zeus at the end of March, can't wait to sell the Vector and the still undelivered Valor once the Zeus arrives. Curtis said in Feb "it 'ill ship in a week" and again in April "it 'ill ship in a week"...Valor order is listed as "complete" as of a week and a half ago....still not delivered. I gave 'em a pass due to the state of the industry this year, but when a seller sets expectations and doesn't follow through on their word, I won't do business with them again.
Lesson learned, the hard way...should have bought the Zeus to begin with
The "checks in the mail" shit started with Curtis at least two years before COVID was a thing...I was supposed to get an action in February of 2019 that didn't show up til October...I was so pissed after all the runaround I literally gave it away when it showed up.
The website seems to show they're available now...at least it let me add one to my cart...
I love my Zeus, rifle came together really nice. I was really impressed with the fit to barrel from @Bugholes, seriously tight threads. @Joel Russo was very helpful along the way.
I didn't see him put any anti seize on threads. I thought that was necessary.
Ask him (@USACS) why he didn’t use any. Anti seize isn’t necessarily required. Some kind of grease is a good idea but the thing is it kind of defeats the quick change system. If I’m swapping a barrel in the field. I don’t have that stuff with me nor am I going to clean the threads in the action.
I didn't as I knew I was going to be swapping barrels. I keep a little tube and apply it now when I do swaps. The sun still rose the next morning even without
Kidding aside if you know you're going to have the barrel on for a while I would recommend it, and the action wrench makes removal easier.
What magazines is everyone running on their BR variants? A few years ago I ran an AICS w/ Primal Rights BR Kit and it ran flawlessly in my Axiom. Planning on a 22BR Zeus.
I tried to get a 6BR to work with AW mags and the HRD kit and failed. I was able to get the 6BR to feed flawlessly (about 200 rounds so far without any issues) using the Primal Rights magazine kit and AICS 10 round mags.
Important note: the 6BR worked with long for caliber 107 Sierra bullets. When I tried to work up some rounds for varmints (6BR with 62 grain Barnes Varmint Grenades and a much shorter OAL) I ran into feeding issues as well. I am still trying to make this work but am starting to think that 6BR won't work with magazine feeding with short and light bullets.
Yeah, my 6BR ran 108gr with ease. My 22BR will be running 88gr ELDMs which are pretty long. Sounds like PR + AICS is the ticket again.
Similar threads
