Well gents, it's been a time in the making & development, but feel its time to share this with the Hide collective!
Did an initial write up on plans & development for my friend's blog, READ HERE for particulars on how the .220 REDLINE came about...
Since then, stock has arrived, I bedded it up, and load development has begun in earnest. Have a found a decent 'working' load that pushes a 75gr JLK in the 4,000 fps range
Yes, that is a .224 caliber, 75 grain boolit at almost 4,000 fps! I clocked it up to 4088fps with a hot load, during ladder testing. This was a step down, from that...
Have since back it off ~3970fps, and things are looking good! Had a chance to wring it out on some woodchucks over the weekend, and the ballistics and terminal results are nothing short of incredible! Took one woodchuck over 500, with ease, and another one @ 737yds.
With a 100yd zero, this load is only 4.5MILS to 1K. Can't think of many other cartridges that can allow for that?!?
Anyway, here's a raw video of helicoptering a chuck @ 512yds. Dialed 1.3MILS for that shot...friggin' laser beam!
Figured the rifle junkys here @ the Hide would get a kick outta this project! Thanks for lookin' & stay tuned for more...
Did an initial write up on plans & development for my friend's blog, READ HERE for particulars on how the .220 REDLINE came about...
Since then, stock has arrived, I bedded it up, and load development has begun in earnest. Have a found a decent 'working' load that pushes a 75gr JLK in the 4,000 fps range
Yes, that is a .224 caliber, 75 grain boolit at almost 4,000 fps! I clocked it up to 4088fps with a hot load, during ladder testing. This was a step down, from that...
Have since back it off ~3970fps, and things are looking good! Had a chance to wring it out on some woodchucks over the weekend, and the ballistics and terminal results are nothing short of incredible! Took one woodchuck over 500, with ease, and another one @ 737yds.
With a 100yd zero, this load is only 4.5MILS to 1K. Can't think of many other cartridges that can allow for that?!?
Anyway, here's a raw video of helicoptering a chuck @ 512yds. Dialed 1.3MILS for that shot...friggin' laser beam!
Figured the rifle junkys here @ the Hide would get a kick outta this project! Thanks for lookin' & stay tuned for more...