-
Having trouble using the site?
Contact support
- Nov 3, 2010
- 10,159
- 21,887
Ongoing project, Colt CQBR(upper) and later a “clone” MK18 Mod0(complete rifle).
Colt upper assembly with a Colt 10.3 inch MK18 barrel(.070 gas port), 2nd Gen Aimpoint, Ma Tech rear sight, KAC RAS will be added as well. I have the OG CCO mount as well, just haven’t put it on yet
Colt upper assembly with a Colt 10.3 inch MK18 barrel(.070 gas port), 2nd Gen Aimpoint, Ma Tech rear sight, KAC RAS will be added as well. I have the OG CCO mount as well, just haven’t put it on yet
Sig MCX Rattler LT .300blk. These are pretty hard to come by from our distributor/s. Have a list of customers wanting one. Finally got one for the first guy on list. Pretty cool little weapon.
Intended for long range rimfire barricade events (25-400+ yards) chambered in .22 Long Rifle.
The build currently consists of:
Tac-Sol dedicated rimfire upper and bolt assembly.
Sako P94S barrel (23” 16.5 twist), turned to fit the adapter which is sized to an AR receiver.
MDT SRS stock.
Shortened buffer and short spring.
IWI 17” Arca/M-Lock/full Picatinny forend.
Sabre Defense XR15 lower and adjustable trigger.
Black Dog mags.
The build currently consists of:
Tac-Sol dedicated rimfire upper and bolt assembly.
Sako P94S barrel (23” 16.5 twist), turned to fit the adapter which is sized to an AR receiver.
MDT SRS stock.
Shortened buffer and short spring.
IWI 17” Arca/M-Lock/full Picatinny forend.
Sabre Defense XR15 lower and adjustable trigger.
Black Dog mags.
Some folks are SERIOUS about a "heads up" shooting posture!
Nice stick!
I hate the way they look. But the 2.91" works extremely well for myself and many others.
I find that the MRO is a bit more forgiving if you want to go shorter. I haven't tried anything taller than the 1/3 mounts, but with an "aggressive" posture, I find the lower 1/3 height to be pretty natural.
This is my first MRO HD. I like it so far overall. The red "haze" in some lighting conditions is annoying, but that's about the only negative. Have been running Aimpoint and Eotech products a couple decades. And more recently some Sig products.
I still run 1.97 on some rifles. However, I still work behind rifles away from the store/shop. So, staying as up to date on current TTP's is part of the gig. Running nvg and gas masks happens.
There's a growing trend to have your carbine and handgun stance/position almost exactly the same now. Which can only really be done with 2.25 or taller mounts. It makes training a bit more efficient. And there's another several bullet points one can make for the taller mounts. I'm a fan. Even if not for professional use, it's just more comfortable.
That being said, it's not for everyone. And it does look kinda dumb (and we all know most of being cool is looking cool).
Here's a little LMT/D.Wilson fun for the day.
I just got the Arca rail in and I'm very impressed. The cut outs for the M-lok screws are a little sharp but it's a lot less bulky and much more comfortable than the alternative. It also let's you run your bipod all the way out (using the RRS clamp).
I just got the Arca rail in and I'm very impressed. The cut outs for the M-lok screws are a little sharp but it's a lot less bulky and much more comfortable than the alternative. It also let's you run your bipod all the way out (using the RRS clamp).
- Nov 3, 2010
- 10,159
- 21,887
CQBR upper is complete for now, early block 1 build.
Who made the Arca rails/adapters?
I was very frustrated at not finding an Arca-Swiss forend longer than 17”.
Last edited:
Great idea and execution. Would like to see those edges around the screws rounded slightly. Sharp!
LMT MRP ARCA Rail Adapters-LMT MRP-ARCA
www.dwilsonmfg.com
Seekins NX15
Razor 1-10
Iray RH25
Otter Creek Polonium
Razor 1-10
Iray RH25
Otter Creek Polonium
Swapped out the BCM upper receiver for a new Forward Controls Design receiver. Bedded the barrel with loctite 620. Action feels nice and smooth now.
BCM upper felt like it was binding while cycling regardless of the gun shooting great and the cam pin wear was very excessive. Upon pulling the barrel out I also noted uneven witness marks from the carrier on the barrel. My guess is the receiver may have been slightly OOS and the barrel threads / hole / face were slightly off axis compared to the raceways in the upper. I know lots of uppers are not perfect and tolerance stacking is a thing, but this was not going to work long term. The cam pin wear shown below is sub 1,000 rounds.
Finally pieced together a replica of my M4A1 Block I from OEF. Gunna snag a MK-18 upper & Elcan as well to complete the set.
- Colt LE6920 SOCOM
- Trijicon Accupoint 1-4x24
- B5 SOPMOD stock
- GG&G 30mm QD Cantilever Mount
- Surefire Scout
- Somogear PEQ
- Colt LE6920 SOCOM
- Trijicon Accupoint 1-4x24
- B5 SOPMOD stock
- GG&G 30mm QD Cantilever Mount
- Surefire Scout
- Somogear PEQ
Rebuild of an old 223 Wylde quasi DMR into a 6mm Max predator hunting rig
SanTan receivers
SLR 13.7 rail
SOLGW 14.5 6mm Max barrel & BCG
SAS Barricade Ti can
Athlon 2-12 Helos BTR
SanTan receivers
SLR 13.7 rail
SOLGW 14.5 6mm Max barrel & BCG
SAS Barricade Ti can
Athlon 2-12 Helos BTR
6max is interesting. If we start seeing ammo availability for it I may look into building an upper as well.
Yessir, I decided to go the dies & brass route instead. So far in testing the 58 gr VMAX and 70 gr Nosler Ballistic Tips are shooting really well with AR Comp powder
Ya, I think my next major project after I do my 300blk receivers is going to be a 6.5cm swap upper for my AR10 that way I can shoot both 308 and 6.5cm out of it. The 308 is a 1k upper max and I know the 6.5 could definitely 1500 no problem with a 20-22” barrel.Yessir, I decided to go the dies & brass route instead. So far in testing the 58 gr VMAX and 70 gr Nosler Ballistic Tips are shooting really well with AR Comp powder
Just finished last night.
San Tan Tactical receiver set
18” Craddock RTR 6.5 Grendel barrel
Superlative Arms piston
JP Enterprises 6.5 Grendel bolt
POF roller cam pin
Geissele 15” MK4
Geissele SDE trigger
BCM MK2 buffer
Fortis K2 end plate
Magpul K2 grip
NightForce NX8 2.5-20x in ADM mount
HUXWRX Flow 762
Going tomorrow to dial it in. The Superlative Arms carrier was snug in the upper. I don’t recall any other carrier being this snug. I swapped in a couple other carriers (which had already been used briefly and all moved freely). I lubed everything up and worked the carrier. Assembled everything seems fine, but I’m going to take it apart and see if it’s still rough… if it is should I put some rounds through it or should I return it for replacement?
Similar threads
