Depends on the field
-
Having trouble using the site?
Contact support
- Nov 3, 2010
- 10,159
- 21,887
Yeah I was gonna say late night plowing leads to crotch fruits that prevent late night plowing.
Vicious cycle
Ok
- Nov 3, 2010
- 10,159
- 21,887
You should probably hide that poverty pony lower in the back. People might get the wrong ideer
Jokes on them all my lowers are aero Anderson bushmaster tier. Shit even the m16 is a bushmaster lol
Lowers don’t matter
Lowers don’t matter
16” SPR. I’ve run it through a few DMR/team matches and it’s an accurate, reliable gun. Running gear is comprised of BHW SPR profile(mid-length 1:8), Geissele LP Block, LMT BCG, Geissele H1 and braided wire spring.
think it’s gonna be better than the proof barrel ?
Did you re use gas block ?
Was barrel a b to get out ?
Behold! My small KAC!
Do you want to touch it? You know you want to touch it.
KAC 11.5” SR-15 CQB 3.1, Sandcutter, 5.56 QDC XYZ PDQ LQBTQIA+ can, T2 + 3x on Unity’s, VZ grip, True North grip nub, black cat:
Do you want to touch it? You know you want to touch it.
KAC 11.5” SR-15 CQB 3.1, Sandcutter, 5.56 QDC XYZ PDQ LQBTQIA+ can, T2 + 3x on Unity’s, VZ grip, True North grip nub, black cat:
- Nov 3, 2010
- 10,159
- 21,887
The bear creek 22 mag will make that thing seem less than impressive
Jesus
Honey Badger SD (Honey Badger SD specific silencer) but with a 6” rail installed instead of the 12”. Set up for primarily low light. The 12” doesn’t really do much and you need a rail cover as it gets very hot from silencer underneath. The 6” also allows for silencer to be removed while also shortening the stowed rifle for backpack or similar storage/transport.
GBRS Hydra 2.0
Aimpoint T2 micro
Wilcox Raid xe FP
Unity Axon switch for laser
Inforce light
Irregular Defense angled grip
Under 6.5lbs as it sits before ammo weight
GBRS Hydra 2.0
Aimpoint T2 micro
Wilcox Raid xe FP
Unity Axon switch for laser
Inforce light
Irregular Defense angled grip
Under 6.5lbs as it sits before ammo weight
Of course this is the part where all the offended parties with junk jump up and holler they have no problems and their lowers are “just as good”. We can ignore those people already as they are sadly lacking in subject, as well as grey matter.
Please excuse the formatting of the above, my iPad hates the forum software.
The 11.3" Craddock Bartlein barrel in this "pistol"/PDW really needs a LPVO instead of an Aimpoint T-2.
I really like the Cerakote - Accuracy Int'l Dark Earth.
sweet setup brother
did you have to heat the upper to barrel connection up to remove the barrel from the receiver since the original Ridgeline LPR barrel was thermo fit?
Played around today to recreate God's plaid on one of my AR's.
Rustoleum Camo Flat Black
Rustoleum Ultra Matte Down To Earth
Rustoleum Flat Brown
Rustoleum Satin Seaweed (had to darken it just a touch with some Flat Espresso paint)
Against my woobie it's a pretty good match. This should tighten my groups up by 30% at least.
Rustoleum Camo Flat Black
Rustoleum Ultra Matte Down To Earth
Rustoleum Flat Brown
Rustoleum Satin Seaweed (had to darken it just a touch with some Flat Espresso paint)
Against my woobie it's a pretty good match. This should tighten my groups up by 30% at least.
Out in the daylight the green is a little bright IMO but I think by the time spring/summer rolls around it will be fine, or I could spritz it with some black to darken the whole thing a bit.
- Nov 3, 2010
- 10,159
- 21,887
Turned the million dollar beast into “swamp thang”
The best "one gun", IMO, is a top quality 14.5" .223 Wylde/5.56 NATO with a pinned and welded muzzle device. With the right optics package (LPVO plus RDS) and quality ammo, it is capable of filling mission roles from arms length to 600 yards. This one starts with a Sharps Bros. receiver set, Criterion Core C/L barrel, pinned and welded HUXWRX flash hide, JP FMOS bolt carrier group, BCM MK 2 recoil system, and TriggerTech trigger. The right Cerakote artist (Ronin ARMS LLC) did it all up in Accuracy Int'l Dark Earth.
My favorite. Vltor MUR upper, ADM UIC ambi lower, Geissele MK4 13” handgaurd, Criterion Hybrid 14.5” barrel, Superlative Arms piston conversion, Geissele SSP flat trigger, Vltor A5 buffer, Vltor Emod stock, Trijicon Credo 1-6 in ADM Recon mount. (Not pictured is 5.5” K can)
Attachments
Criterion 14.5" Hybrid Barrel
Geissele 10.5" Super Duty Blem Set including buffer tube and SSA-E trigger
NF NXS 2.5-10x42mm in a Badger 1.54" mount w/T2 45°@1.93"
Unity Tactical Scout mount w/ SF m300 Vamp Head
Griffin Stealth Flash Hider pnw by D.Willson
Geissele 10.5" Super Duty Blem Set including buffer tube and SSA-E trigger
NF NXS 2.5-10x42mm in a Badger 1.54" mount w/T2 45°@1.93"
Unity Tactical Scout mount w/ SF m300 Vamp Head
Griffin Stealth Flash Hider pnw by D.Willson
Got the 11.5 together, feels great. Really loving the Wolfpack Armory recessed flash hider and suppressor mount. It tucks the can back far enough that my 11.5 is now no longer than my 10.5 with the old mounting system with a little more rail space too. Blast baffle be damned.
Upper is a 11.5 CHF CL Centurion Arms barrel and a Superlative Arms short stroke piston kit. Running an LMT e Bolt and Lantac domed cam pin in the carrier, A5 system in the buffer with a rifle length Geissele Super42 and BCM Mk2 T3 buffer. Ran incredibly smooth with the 10.5, excited to shoot it with the new barrel.
Upper is a 11.5 CHF CL Centurion Arms barrel and a Superlative Arms short stroke piston kit. Running an LMT e Bolt and Lantac domed cam pin in the carrier, A5 system in the buffer with a rifle length Geissele Super42 and BCM Mk2 T3 buffer. Ran incredibly smooth with the 10.5, excited to shoot it with the new barrel.
My 12.5 posted above you Is also a SA short stroke.
11.5 build with a Roscoe barrel. BCM 10” peen rail, H2 buffer system, GB, and BCG. Geissele G2S and ACH charging handle. M68 W/ matching 3x magnifier on Larue mounts. DA Sandman K. Troy BUIS. Streamlight Protac 1.0 w/ tapeswitch mounted in a Cloud Defensive Mount.
16" Criterion Hybrid, 13.9 Criterion Core, 12.5 Criterion Hybrid, 11.5 BA Hansen.
Read through some of your posts and was pleased to find that SA Piston high round count stuff. Mines been great to me so far. Ive done a lot of fine tuning on the setup but it's easily one of my softest shooting, least gassy suppressed rifles.
Similar threads
