This should make for a nice LMT rifle before too long. I took an old AAC Mini4 out of safe for the first time in 4-5 years, should be a good fit for the 14.5" to keep things short.
-
Having trouble using the site?
Contact support
I've thought about it, I have a SDN6 as well that could use it but honestly they live on one host and I have never had an issue with them so it's not high on the priority list at the moment.
KAC SR-15 Mod 2 11.5" SBR with a KAC 556 QDC CQB can.
New video comparing my Dead Air Sandman-S & Nomad-LT with my Otter Creek Labs Hydrogen-S on my new 10" .300 BLK build. I'm using a non-magnified EOTech 512 with the A65 "donut of death" reticle to holdover and hit a 10" steel gong at 200 yards.
Last edited:
Black Fire Forge 10.5”. SBA3 brace. EOTech XPS2 sight. Huxwrx FLOW 5.56 can. JP LMOS and SCS.
5lbs 12oz
Vseven 7075 Enlightened Upper & Hyper-light 15” handguard
16" .625 Hanson Barrel
I love this upper. Might actually keep it.
Vseven 7075 Enlightened Upper & Hyper-light 15” handguard
16" .625 Hanson Barrel
I love this upper. Might actually keep it.
Man, I've got good assembly and range time with everything from Aero to Noveske, LMT, and Radian...say what you will about the price, but with that reference point I'd say Roger at FCD puts out some of the most high quality components in the industry. Excellent fit and finish, super tight tolerances. The FCD Safety is undoubtedly the best I've felt.
I added the extras. It started as a stock 917 short.
Here is my latest build. Love LOVE LOVE the carbon fiber. Stays cool! Can run full mags(not clips) through it and the barrel is cool enough to grab. Just avoid the Gas tube and block, that hurts. 
Last edited:
You called a magazine a clip… argument invalid.Here is my latest build. Love LOVE LOVE the carbon fiber. Stays cool! Can run full clips through it and the barrel is cool enough to grab. Just avoid the Gas tube and block, that hurts.
You called a magazine a clip… argument invalid.
You got me. I'm old enough to remember when we called the clips, for the Remington 22 I hunted with as a kid, a clip, and it just stuck.
They generally don't go very far, and the woods hunting I do the most means you can see where they ran.
BCM 14.5" SOCOM, Aimpoint Pro in a QRP2 with SKD 1.93" riser.
Colt 6940 cut and pinned to 14.5" by Adco, NF NXS 2.5-10x42mm and a 1.54" 0moa Badger Ordinance mount.
Waiting for funds to recharge before I add an offset T2 to the 6940 and probably a Magpul bipod. Any one have better bipod recommendations for a shorty SPR?
Colt 6940 cut and pinned to 14.5" by Adco, NF NXS 2.5-10x42mm and a 1.54" 0moa Badger Ordinance mount.
Waiting for funds to recharge before I add an offset T2 to the 6940 and probably a Magpul bipod. Any one have better bipod recommendations for a shorty SPR?
Last edited:
Yes… an Atlas CAL gen 2. Just get one and be happier. And maybe a longer rail to maximize the benefit of a bipod.
When it comes to bipods, is there a preferred attachment method between pic and MLOK (as it pertains to leaning into the buttstock/bipod for stronger bracing)?
Great info, thank you. The only experience I have with bipods is flat range with the 249. Also saw some guys mention that one of the benefits of the Atlas is that you can load the bipod because it mounts on "backwards." I figured this was done for "down range" purposes. But thinking about what you've said, it makes sense that not every scenario will allow for this.
Longer rail isn't happening unless I replace the monolithic upper... the thought has crossed my mind.
Probably pic rail. Pic rail is stronger than the slicker methods. Like the above guy said, pull the rifle into you. I used to push into the bipod but now am splitting it 50/50 (ish). You may also experience consistency issues as described above if you hard load the bipod.
@lowlight has a great video about shooting a semi auto on Youtube or in the training section here. I recommend watching it for a better explanation and visual of what people are saying here.
Ah, I did not know that. Well, at least you’ll have zero flex in the handguard.
Last edited:
KAC SR-30 9.5” .300 BLK, TBAC Ultra 9, Elcan 1/4x, FWS-i thermal clip-on:
Ultralight Yote Night-Schwacker.
Ultralight Yote Night-Schwacker.
Are you running subs and supers through the TBAC? It needs a 762 QDC/CRS. I've been mulling over going back to the Elcan for the 14.5" recently, heavy but I have always been a fan.
C’mon. No one on here believes you ever stopped.
I’d love to run some of those in my 300blk when my AFT suppressor bribe goes through. Issue is I haven’t been able to find any of that anywhere.
I have that same Crossman in FDE.LMT and Crossman
Super F-U-N little full-auto BB gun!!!
A new .300 BLK build utilizing a V Seven 10.25" SS barrel with proper feed ramps for this caliber (a rarity for some reason). JP FMOS bolt carrier group riding as smoothly as can be inside the STT-15L receiver set. Geissele 9.5" MK14 rail and ACH charging handle. TriggerTech Competition 3.5 LB trigger on V Seven titanium fire control pins. DHD magazine release and stainless Ionbond DLC coated push pins. STT bolt release. BCM MK2 recoil system with H0 buffer, secured in place by the novel design Fortis K2 receiver end plate and castle nut. SB Tactical pistol brace. OSS/HUXWRX flash hider (substitutions available). Magpul K2 pistol grip. Lance translucent .300 BLK magazine. Aimpoint T-2 with 39mm QD mount.
Last edited:
Just finished assembling this all black AR, need to figure out which optic I'm going to put on it.
Forgot I had won this Rifles Only/Dead Air HAD suppressor cover back in like 2020… Found it in the safe today and decided to fit it on my Sandman-S on my 10” .300 BLK just to protect [what’s left of] the finish. Not my ideal color, but it was free, so…
But it still looks pretty good in there, IMO.
But it still looks pretty good in there, IMO.
I worked with a guy once who, when he heard that, looked down at his hands… then looks back up at us and says “I don’t think that is true…”. He was looking very bewildered…evidently, you didn't go blind. but do you have hairy palms?
I re-barreled this one and threw my K16i on it.
That will probably shoot better than the KAC barrel…..
Mine does for sure!
My Douglas/CLE 16” I bought from @reubenski is a friggin hammer like he said it was.
Light and handy, 1-4 with illum.
Whackin critters with 77 smk no issues.
Mine does for sure!
My Douglas/CLE 16” I bought from @reubenski is a friggin hammer like he said it was.
Light and handy, 1-4 with illum.
Whackin critters with 77 smk no issues.
No. Those are 9mm HST's that I found at the bottom of my berm. I thought they were cool.
My Black Friday Geissele stuff came in today
Not sure why but I love those magpul rail covers. I got a fn military collector m4 and it had the knights armament covers and they made the girl a bit too thick.
Man I need to take a firearm photography class. Some of you guys post some killer picture that look like they are straight out of a magazine.
