So what exactly did your rifle end up liking the most? I guess since you were just chrono'ing it not a big deal but I start losing track when mixing groups like that. Did you keep notes on the order and location of the hits by any chance?
-
Having trouble using the site?
Contact support
The Fix from Q
- Thread starter Tyler455
- Start date
So what exactly did your rifle end up liking the most? I guess since you were just chrono'ing it not a big deal but I start losing track when mixing groups like that. Did you keep notes on the order and location of the hits by any chance?
Hahah! It worked! Not sure if the gun will fire now ???
But, it def made the bolt lift not so heavy.
For the record, follow this video to a completely stripped bolt, when you lock it into the over cocked position (the rollers) just over power the spring and spin it a few times, I did it about 10x and put it all back together. Make sure it’s oriented correctly, and I don’t get a twang anymore dry firing, as well “as” heavy of a bolt. I didn’t want to over do it, but it seems to have worked.
Shooting tomorrow. Will post back.
But, it def made the bolt lift not so heavy. For the record, follow this video to a completely stripped bolt, when you lock it into the over cocked position (the rollers) just over power the spring and spin it a few times, I did it about 10x and put it all back together. Make sure it’s oriented correctly, and I don’t get a twang anymore dry firing, as well “as” heavy of a bolt. I didn’t want to over do it, but it seems to have worked.
Shooting tomorrow. Will post back.
Actually now that I’m thinking about it, Stache, maybe you could wind it up? Thus, striking the primer harder? I may be way oversimplifying your problem... but, I’m pretty sure you’re just winding this spring up when you pull the bolt back and the spring is driving the bolt into the primer once the sear is contacted... ???? Again. Grain of salt. Pharmacist.
?? Again. Grain of salt. Pharmacist.
^^^ Best disclaimer ever. Haha. Hope it works for you man.??
Bro. We need pics of what’s happening. I’ve watched that video and I didn’t see any springs hahaStache, manMine doesn’t either..
Mine does make the twang sound. Serious question. Have any of you stripped the bolt? When I first got the rifle, I took it all apart thanks to Kitbadger’s videos and I was just thinking... I had the bolt stripped and the locker locked out on top, and I pulled on it releasing the spring tension (accidental at the time). You guys think that would decrease the amount of bolt lift? Mine isn’t noticeable when I’m running it, ive been shooting 120 Hornady match, but to make it even smoother/get rid of the twang noise, I wonder if letting some of the tension out of the spring would do that?
I’m a pharmacist, not an engineer ??? might just do it and see what happens. You could always dial it back up... right?
Actually now that I’m thinking about it, Stache, maybe you could wind it up? Thus, striking the primer harder? I may be way oversimplifying your problem... but, I’m pretty sure you’re just winding this spring up when you pull the bolt back and the spring is driving the bolt into the primer once the sear is contacted... ??
thats interesting
Last edited:
Alright... can you delete posts? 
Im an idiot and pulling all of the grains of salt lol. I just took it all apart again, even down to the lugs... the spring tension is set from q. I was just spinning it in its housing they have a plastic base plate holding it in place, I must have not been hearing the twang as it was sitting on the sand bag, but I swear it was lighter. Lol. Literally didnt do anything... apologies.
Im curious as to how/what the initial bolt lift problem was? I mean again, mine isnt THAT bad, but its no surgeon scalpel... anyway. dont do that. haha
Still shooting tomorrow. Get back to you guys.
Im an idiot and pulling all of the grains of salt lol. I just took it all apart again, even down to the lugs... the spring tension is set from q. I was just spinning it in its housing they have a plastic base plate holding it in place, I must have not been hearing the twang as it was sitting on the sand bag, but I swear it was lighter. Lol. Literally didnt do anything... apologies. Im curious as to how/what the initial bolt lift problem was? I mean again, mine isnt THAT bad, but its no surgeon scalpel... anyway. dont do that. haha
Still shooting tomorrow. Get back to you guys.
Where did you get that velocity number for the 143 Eld X’s? Was that the factory load as well?
A member here and all around good dude @jwknutson17 did some testing for science back on page 25. Here’s a screen grab. It’s a 17 inch Bartlein/Tooley barrel doing 2500+ with factory 143 hunting ammo. So I’d say my estimate of 2475 out of a 16 is pretty fair. But just today my 16.5 got up to 2570 with no pressure signs with a 147 hand load. I’d say 2500 would be doable for the 143.
Attachments
Thank you for that. Definetly getting a 16” when I go up there in March to build mine. Hopefully when my Thunder ChIcken clears NFA jail soon, It’ll help the bullet clear 2500 FPS
Made it out to the range today, it's so nice going on weekdays and finding an empty range. Just trying to work on my fundamentals, I'll be honest are lacking severely, and seeing how the gun reacts to different factory ammo. All I shot today was my 16" B/T barrel, hoping the new barrel wrench makes it in in the next week so I can give that a try compared to the using the one on my torque wrench.
I shot American Eagle 150gr, Hornady Superperfomance Match 178gr BTHP, Hornady Match 168gr BTHP and Hornady Black 155gr A-Max in the order listed. The image shown without the Ballistic-X overlay is my various 100yd sighters, I forgot to list which group was which, the other three are all 200yd groups. Take these groups as more of a demonstration to my ability to shoot the rifle rather than the rifles ability to shoot good groups. All groups were shot prone, which is a position I need to work on. The more I shoot my Fix, the more I love it.
One thing I did discover today, is that my scope is slightly canted to the rifle. I only noticed this after I figured out how to stiffen up my Atlas bipod to prevent me from canting the rifle.
And because someone mentioned we need more pictures of the Fix itself, I've included a couple of the rifle.
I shot American Eagle 150gr, Hornady Superperfomance Match 178gr BTHP, Hornady Match 168gr BTHP and Hornady Black 155gr A-Max in the order listed. The image shown without the Ballistic-X overlay is my various 100yd sighters, I forgot to list which group was which, the other three are all 200yd groups. Take these groups as more of a demonstration to my ability to shoot the rifle rather than the rifles ability to shoot good groups. All groups were shot prone, which is a position I need to work on. The more I shoot my Fix, the more I love it.
One thing I did discover today, is that my scope is slightly canted to the rifle. I only noticed this after I figured out how to stiffen up my Atlas bipod to prevent me from canting the rifle
. And because someone mentioned we need more pictures of the Fix itself, I've included a couple of the rifle.
Attachments
![IMG_7335[770].JPG](/shooting/data/attachments/204/204724-e2fc4542e788a9216fea8407969b54a6.jpg)
Made it out to the range today, it's so nice going on weekdays and finding an empty range. Just trying to work on my fundamentals, I'll be honest are lacking severely, and seeing how the gun reacts to different factory ammo. All I shot today was my 16" B/T barrel, hoping the new barrel wrench makes it in in the next week so I can give that a try compared to the using the one on my torque wrench.
I shot American Eagle 150gr, Hornady Superperfomance Match 178gr BTHP, Hornady Match 168gr BTHP and Hornady Black 155gr A-Max in the order listed. The image shown without the Ballistic-X overlay is my various 100yd sighters, I forgot to list which group was which, the other three are all 200yd groups. Take these groups as more of a demonstration to my ability to shoot the rifle rather than the rifles ability to shoot good groups. All groups were shot prone, which is a position I need to work on. The more I shoot my Fix, the more I love it.
One thing I did discover today, is that my scope is slightly canted to the rifle. I only noticed this after I figured out how to stiffen up my Atlas bipod to prevent me from canting the rifle
And because someone mentioned we need more pictures of the Fix itself, I've included a couple of the rifle.
If you naturally cant the rifle when you shoot, the scope shouldn't be level with the rifle. Hold the rifle how you would naturally and use a plumb line. Thats level.... doesn't matter how the scope looks on the rifle itself.
Its good seeing people posting pics/range reports
.I want to get that program but my computer doesn't have a cd drive. I wish they would have it for sale on a flash drive or something.
I’v never heard anyone say to have a setup that is canted. I mean if it works than it works but I would rather have everything in line and plumb and use a level before the shot to make sure its dead on.If you naturally cant the rifle when you shoot, the scope shouldn't be level with the rifle. Hold the rifle how you would naturally and use a plumb line. Thats level.... doesn't matter how the scope looks on the rifle itself.
Its good seeing people posting pics/range reports
I can try to help you out but I won't be home until 8-9 cst tonight
Look into it. Not wrong to just level the scope with the rifle, but I typically level the scope to my natural shooting position. It is 1: more comfortable that way and 2: more repeatable.
ETA: Saved you a little research time (2min)... I'm sure there is more out there
@Gotlag1789
Attachments
Thanks man. If you’re available. I appreciate it. I’ll PM you the info I have and just anytime you get around to it would be much appreciated.
I’m sure I naturally can’t the rifle, but it feels like something is off between the scope and rifle. I feel like I’m fighting between holding the rifle comfortably and looking through the scope properly while in the prone position. Shooting from the bench feels fine though. So maybe I need to readjust it to fit better in the prone. Guess I need to film myself to see what I’m doing, maybe ask around to see if I can find an experienced shooter to help me out. Thankfully I am taking a class from @Lowlight up here in Alaska in May, so hopefully he’ll get me squared away as to what I’m doing wrong. I am taking my Fix to the class, just have to decide if I’m going to run the 16” .308 B/T barrel or 24” 6.5cm Proof carbon fiber barrel.If you naturally cant the rifle when you shoot, the scope shouldn't be level with the rifle. Hold the rifle how you would naturally and use a plumb line. Thats level.... doesn't matter how the scope looks on the rifle itself.
Its good seeing people posting pics/range reports
Edit* corrected my mistake on the Proof barrel length.
Last edited:
Wait where did you get a 22 inch Proof Carbon. I bet that’s sexy as hell. I want a 22 inch carbon bad
Yea, everything should mesh up. If it doesn't feel right, it isn't right. Just make sure you are using a plumb line and not some sort of "trick" to level your scope and always level it while holding the rifle as you would while shooting. But hey, grain of salt, pharmacist haha
Yes I meant 24”..... I just can’t seem to remember it correctly. Sorry @Movistar I misspoke the length.
I’ll post some later this afternoon. Going to hit the range again after work and switch to the proof barrel. If I can remember I’ll try and time myself to see how long it actually takes to do a barrel swap. I’m going to do the same thing testing a couple different ammos too.
Did a quick search and didn’t see much...how is the trigger on the Fix? I’m used to a Geissele 2 stage on my Scar 17 and AR for comparison.
To me, it’s the best bolt gun trigger I’ve ever felt. But I also know triggers are subjective. Personally I prefer RRA NM 2 stage in my ARs over Giessele triggers which I tried 3 different G models and I just don’t get the hype. So triggers are a bit of a personal thing. But I love this one. 2 stage, very crisp. If you watch the Kit Badger deep dive videos (required reading and a total must for any fix owner or even prospective owner) you’ll see how they say they are all a little different but they rest each one for creep and for crispness.
Edit to add: it’s about 2lbs according to Q
Edit to add: it’s about 2lbs according to Q
Last edited:
Geissele uses a heavier first stage and a lighter second stage (for example, the SSA-E has a 2.3lb first and a 1.2lb second stage). The Fix trigger is almost the inverse of this with a VERY light first and a heavier, but crisp, second stage. I don't know the exact weights for the fix but have heard that it breaks at ~2lbs to 2.5lbs, which makes sense, but that 2-2.5lbs is almost entirely in the second stage. I like heavier first with lighter second personally, but its a good trigger. You won't have any issues with it.
Last edited:
Had BGM spin me up a shorty 7.5 twist creedmoor today. Hopefully ill test it next week!
So I timed myself to see how long it takes to do a barrel swap and it was 9.5 minutes, not including time to take pictures. The hardest part was pulling the .308 B/T barrel from the receiver. Purely timed myself out of curiosity.
Sadly I only had 3 different factory loads to shoot today out of the 24" Proof, I got the length right this time. They were American Eagle 120gr open tip match, Hornady Match 120gr ELD and Federal Gold Medal Match 140gr Sierra Matchking. I did pull a round in my grouping for the Hornady and Federal, as seen in the pictures, so those were only factored as 4 round groups. It definitely seemed to prefer the Federal GMM over the other two. I picked up some Hornady Match 140gr ELD and Hornady Superformance 129gr SST. Might be able to make it to the range again tomorrow to see.
So I realized looking through my group photos between the .308 and 6.5 barrels, it appears that even though I use the same scope with both, just re-zero at 100yds for each round, that at 200 yards I have a consistent drift to the right for every round I try. My goal on the next range trip is to try and do a tall target test to see if my scope is tracking straight, and to see how the impacts track as I adjust the scope. Any thoughts on what I should look at, please let me know. The only thing I noticed when I did the barrel swap is some rubbing where my scope rings mount to the rail.
Sadly I only had 3 different factory loads to shoot today out of the 24" Proof, I got the length right this time. They were American Eagle 120gr open tip match, Hornady Match 120gr ELD and Federal Gold Medal Match 140gr Sierra Matchking. I did pull a round in my grouping for the Hornady and Federal, as seen in the pictures, so those were only factored as 4 round groups. It definitely seemed to prefer the Federal GMM over the other two. I picked up some Hornady Match 140gr ELD and Hornady Superformance 129gr SST. Might be able to make it to the range again tomorrow to see.
So I realized looking through my group photos between the .308 and 6.5 barrels, it appears that even though I use the same scope with both, just re-zero at 100yds for each round, that at 200 yards I have a consistent drift to the right for every round I try. My goal on the next range trip is to try and do a tall target test to see if my scope is tracking straight, and to see how the impacts track as I adjust the scope. Any thoughts on what I should look at, please let me know. The only thing I noticed when I did the barrel swap is some rubbing where my scope rings mount to the rail.
Attachments
I like Kevin. Great guy but I heard the accuracy isn’t up to par. Like 1 moa. I like the concept of the rifle though
Lol plenty of people on here getting .5-.75 MOA, more than likely it's a fundamentals thing for people who are only getting MOA.
I’ll save you 55 pages of reading. The gun shoots great. It isn’t EASY to shoot tiny groups with because of its lack of weight, particularly in 308 (lighter by a lb and more recoil) but guns have been sent back to Q who shoots half MOA with them. I also noticed on a podcast KB said they shoot every gun for accuracy before it ships. They shoot 5 round 100yd groups. 6.5 is all under half MOA easy and the 308 are right about a half or they don’t ship. It’s pretty evident that this gun while capable in the hands of people used to them (Q) it exposes the lack of fundamentals in others. It isn’t an easy gun to shoot. But I love mine. A lot.
sweet. Where the story with the brake? That’s a tight blend. Are you keeping your other Bartlein you had them spin?Had BGM spin me up a shorty 7.5 twist creedmoor today. Hopefully ill test it next week!
Other people have posted good groupings. Mine have been around .5-1moa at 100yds and 1moa at 200yds. I know I have poor fundamentals and need to work on me to tighten up the group. The rifle is a hammer, and I love it.
He had a small break from his old barrel that he turned down and put on for me. 5/8 -24
No real plans on the other bartlein right now
Opened an RMA with the distributor/importer as well as on Qs end, this is the response I got from the distributor/importer. I’m sure you can imagine what my response was.
So this is on going.
Does anyone else’s bolt droop so much at the front it hits the feed ramps on the barrel extension and is pushed up into the barrel extension? Because mine sure does. I’ve forwarded all this onto the people that need to see it I just don’t understand why it is such a big deal to get me a new bolt. Clearly there’s something wrong here with the shroud to rails fit or the bolt to shroud fit and it’s drooping too much at the front and getting caught on things and running into the feed ramps.
@sexparty interesting name change ?
On a serious note, my bolt is the same way.... with no mag inserted. I insert the mag and it’s straight as an arrow. I don’t think what your video is highlighting is a problem in my opinion.
Regarding feeding issues, if I run my bolt fast it’s fine. It’s slow that seems to occasionally cause issues. But aren’t pretty much most bolt guns that mag feed like that?
On a side note, sounds dry to me. Lube that sucker up.
On a serious note, my bolt is the same way.... with no mag inserted. I insert the mag and it’s straight as an arrow. I don’t think what your video is highlighting is a problem in my opinion.
Regarding feeding issues, if I run my bolt fast it’s fine. It’s slow that seems to occasionally cause issues. But aren’t pretty much most bolt guns that mag feed like that?
On a side note, sounds dry to me. Lube that sucker up.
I shot my Fix today and finally took some pictures of groups since I downloaded the new Ballistic-X app. I shot three groups of Federal Gold Medal one group was 168g and two were 175g. Then I shot two more groups of a 155g load I’ve been working up for the rifle just trying to finish up seating depth.
Oh and my rifle is a .308 with a 16” green mountain barrel
Nice! Tell us about your butt pad mod. Also what can is that? Looks like maybe a surefire?
@redneckbmxer24
That is exactly what I have been looking for to make the Q fit how I hunt up here in MD(off of an RRS).
Please keep me updated on when these are available!
@kpaschall2002 Did you put your muzzle device on without using a taper adapter or an I seeing that wrong? If so, I assume everything is working fine?
Similar threads
Suppressors
Q Customer Service
