Think about how low and forward you can get on a bag with one of these bad boys
This is gonna take over PRS
- Thread starter BurtG
- Start date
That’s right up there with this.
HERRING® MODEL 2024 - MODERN LEVER ACTION RIFLE (HLR-556-BK)
KEY FEATURES CALIBER9MMWEIGHT5.7 LBSOAL37”BOLTMIL-SPEC CARPENTER 158BARREL4140 CHROMOLY, 16.25” 1/9 TWISTTHREADED 1/2" x 28 TPIBARREL EXTENSIONMIL-SPEC E8620RECEIVERSCAPTIVE PUSH-PIN TAKEDOWN AEROSPACE GRADE 7075-T6 FORGINGS. UPPER RECEIVER INCLUDES EJECTION PORT DUST COVER.STOCK & FOREARMFOREST...
fightlite.com
Though someone made the point that in countries that disallow semis, these configurations allow for the use of readily available AR components, barrels, calibers, and uppers.
And it's the 1930's all over again! 
Good for gettin' extra extra low, like if you're trying to get cover/concealment on Astroturf.
Good for gettin' extra extra low, like if you're trying to get cover/concealment on Astroturf.
I want a top fed AR10 upper in 7.62x39mm. Where's my mutated tacticool Bren-gun-looking bastard gun?
hoping they bring back smooth bore muskets for competitions everyone seems to be stuck on new fancy guns with new fancy tech get back to basics .
Think about how low and forward you can get on a bag with one of these bad boys
View attachment 8104018
They can also use a 200 round drum and never do a mag change
Though that could affect balance somewhat, being side feed.
Oh right…I forgot, for PRS.Na you just stack 10lbs of weight on the right side
The toe of the stock still limits how Low you can get- especially with a 10-12 round mag popular in PRS. But, the mag hanging off the left side prevents roll over shooting on that side. A 10 round mag is, in effect, even more in the way on this gun than it is on a standard rifle.
I think you're looking for faults, rather than advantages. Just think how many people won't want to borrow it.
This rifle definitely falls into the category of "Dude, leave some pussy for the rest of us..."
Think about how low and forward you can get on a bag with one of these bad boys
View attachment 8104018
My PRS rifle balances just forward of the mag well, so I don't need to get "more forward-" the magazine is not in the way of the balance point. And as your picture clearly shows, even with a 10 round mag hanging from the bottom, the lowest point of the rifle is the toe of the stock. That is what prevents you from getting lower, not the magazine. On my rifle, the pistol grip is the lowest point that prevents getting lower, not the magazine. All this rifle does is put the magazine in the way if you need to make a shot from a really compromised position- like roll over prone. No, that is not a common requirement in PRS, but it is often seen in "action shooting" like 2-gun and run and gun events.
The gun above is a hot mess.
Engineer 1- "Lets take the bent stock from a traditional rifle and merge it with the high bore offset of an AR-15."
Engineer 2- "YES, the worst of both. GENIUS!!!"
First thing I thought. They make a reproduction as I understand they are almost as hard to get as a "real" version.
