Tikka T1x and Jard triggers

[1badDart]

My Jard trigger that I ordered earlier this week came today so I installed it tonight. The safety lever is too tall and prevents the bolt from cycling so tomorrow night I'll cut 1/8" out of the lever and tig weld it back together. It still may require some grinding to clear. Just cocking and dry firing the trigger feels very good and breaks at about 7 ounces.

In Jard's defense this trigger isn't advertised for the T1x, just for "Tikka" rifles so I have no complaints with them.

 

[Baracuda22]

GOOD TO KNOW! I heard most tikka t1x owner going this route.Also I heard from others that timney tikka t3 also same problem.

 

[littlepod]

Sterk handle clears the Timney Trigger, but that Jard looks super high.

 

[Kisssofdeath]

Sterk handle clears the Timney Trigger, but that Jard looks super high.

I can verify that with my Timney and Sterk.

 

[Baracuda22]

I can verify that with my Timney and Sterk.

sir, no wonder why sterk handle sold quickly,always on back order now I know why??..

 

[srt-4_uk]

The sterk is totally worth it even if it did hit the safety.

 

[Kisssofdeath]

sir, no wonder why sterk handle sold quickly,always on back order now I know why??..

LOL, well I don't know about that but they do compliment each other.

 

[cannoncrossfire]

sir, no wonder why sterk handle sold quickly,always on back order now I know why??..

Still in stock at tacticalworks and delta tactical

Tikka :: Tactical Works, Inc

Sterk - Tikka T1X Swept Ball Handle

Sterk Tikka Tikka Firearms Berreta Beretta Shot SHoot Gun Handle Swept

www.deltatactical.com.au

 

[Baracuda22]

Good to know!

 

[Kisssofdeath]

I've bought from Tactical Works several times. ATM they are having free shipping and no minimum order. I just bought another SAP mag holder. $12.50 delivered.

 

[Baracuda22]

My Jard trigger that I ordered earlier this week came today so I installed it tonight. The safety lever is too tall and prevents the bolt from cycling so tomorrow night I'll cut 1/8" out of the lever and tig weld it back together. It still may require some grinding to clear. Just cocking and dry firing the trigger feels very good and breaks at about 7 ounces.

In Jard's defense this trigger isn't advertised for the T1x, just for "Tikka" rifles so I have no complaints.

**7 oz. wOW.. lets go back to the topic please.....! that's a real nice trigger they really breaks what they advertise them on their website.Can you post picture when you do the fittings? Thanks

 

[1badDart]

It's done.

 

[Baracuda22]

well done! good job is your bolt handle is factory? or MT?

 

[1badDart]

The bolt handle is factory.

Thanks, Justin

 

[JGR1953]

I sanded the peak off the thumb plate on the Timney it clears fine now......

 

[1badDart]

I adjusted the trigger tonight following the included instructions, it's at about 4.7 ounces. But if the bolt is slammed forward and down it will slam fire, no bump fire and it has to be slammed forward and down to fire. Slam it forward only or down only and it won't fire. Honestly I've never seen anyone run a bolt gun hard enough to make this one slam fire. There seems to be no creep and it breaks clean so I'll shoot it off a bench before making anymore adjustments. I think just a little more sear adjustment will fix it.

 

[Kisssofdeath]

Great, looking forward to the range report.

 

[runningbear]

sir, no wonder why sterk handle sold quickly,always on back order now I know why??..

So the swept Sterk ball handle will clear the Timney safety on the T1X? Just want to make sure

 

[littlepod]

So the swept Sterk ball handle will clear the Timney safety on the T1X? Just want to make sure

It won't. You'll need to file the safety down a little bit. It'll clear the Anarchy Outdoors handle though since you can kind of customize the angle.

 

[Kisssofdeath]

Well, actually it will. This is the Timney safety. The bolt handle rides just above it. It does not hit.

 

[littlepod]

Well, actually it will. This is the Timney safety. The bolt handle rides just above it. It does not hit.

View attachment 7444536View attachment 7444537

I had it where when I was cycling it it set the safety on. I guess it depends on how close the tolerances are maybe?

 

[jlow]

Just to let you guys know, Jard has made a trigger just for the T1x with a safety which is lower and will clear the bolt. Photos for your view. Got mine last week after calling and talking to them and found out that it is now available. Not yet on their website but available if you call.

 

[TahoeDust]

I adjusted the trigger tonight following the included instructions, it's at about 4.7 ounces. But if the bolt is slammed forward and down it will slam fire, no bump fire and it has to be slammed forward and down to fire. Slam it forward only or down only and it won't fire. Honestly I've never seen anyone run a bolt gun hard enough to make this one slam fire. There seems to be no creep and it breaks clean so I'll shoot it off a bench before making anymore adjustments. I think just a little more sear adjustment will fix it.

I just found this thread. I ordered the "new" t1x version tonight. How did yours perform @1badDart ? I have a Timney T3 in it now, and can not get it down as light as I would like.

 

[1badDart]

I like it, IMO it's much better than the factory.

 

[Droptiner]

Well, actually it will. This is the Timney safety. The bolt handle rides just above it. It does not hit.

View attachment 7444536View attachment 7444537

Is that an aftermarket metallic bolt shroud?