-
Having trouble using the site?
Contact support
Tikka T1X
- Thread starter AirGunShawn
- Start date
Tikka T1X
I know they are not out yet, but I'm looking forward to getting the details on it. Maybe the 455 has a little competition. You may not have a barrel that is super easy to replace, but MAYBE the barrels on these will be as good as Tikka's centerfire rifles and negate the need to replace it. None...
www.snipershide.com
It should fit a T3x stock. It was designed to anyway.
Euro Optic has some of the aftermarket accessories.
Euro Optic has some of the aftermarket accessories.
it fits, but you need to remove material in the magwell area, in order for the dbm/trigger gaurd to fit.
I have a t1x in a sporter stock, and another member here does as well
definitely something you can do yourself with a dremel
I have a t1x in a sporter stock, and another member here does as well
definitely something you can do yourself with a dremel
That’s sort of amusing Tikka calls that a “sporter” stock, haha.
Does anyone sell just the T3x sporter, er, hunter/forest stock?
Does anyone sell just the T3x sporter, er, hunter/forest stock?
i think this is what your asking?
www.midwestgunworks.com
Stocks
Give your Tikka T3 rifle an upgrade with a variety of stocks from Tikka. These stocks are right handed and come in either a laminate, lite or sporter style / configuration. These stocks feature standard polymer design or different wood grain patterns and provide you with extras like sling...
i think this is what your asking?
Stocks
Give your Tikka T3 rifle an upgrade with a variety of stocks from Tikka. These stocks are right handed and come in either a laminate, lite or sporter style / configuration. These stocks feature standard polymer design or different wood grain patterns and provide you with extras like sling...
that's the one
Too bad there’s no hunter or forest pattern wood Tikka stocks.i think this is what your asking?
Stocks
Give your Tikka T3 rifle an upgrade with a variety of stocks from Tikka. These stocks are right handed and come in either a laminate, lite or sporter style / configuration. These stocks feature standard polymer design or different wood grain patterns and provide you with extras like sling...
Hello MM,
Is that a T1x in that T3x Sporter stock? It looks like it. That is what I'm after.
How do you like the T1x? Would you do it all over again?
Thank you
Shawn
Is that a T1x in that T3x Sporter stock? It looks like it. That is what I'm after.
How do you like the T1x? Would you do it all over again?
Thank you
Shawn
yup, that's a T1x in a T3x sporter stock.
I like it, I would do it again.
Plus there's a lot of chassis options, and I can't complain with accuracy.
Going to do ammo lot testing with all the top ammo's this weekend, to see if I can get a solid 0.50moa
- If I can't, I'm going to buy a vudoo, but at 1/4 the price, not really a fair comparison
Buy the Vudoo too..... you will like her.
I have extra bolt parts just in case. They are also really inexpensive.
Shawn
Attachments
MM,
Did you get your stock from MGW? Who's glass are you using and at what power? I cant make it out.
Is that some sort of anti-slip tape you have on the scope to keep the covers in place?
Your gun is virtually everything I want in a T1x except I want mine silenced. If your using that brake as a thread protector, it is very cool looking and I would use it while not shooting just for the COOL factor. I don't care for the plastic thd pro that the factory ships the rifle with. I have no problem with poly magazines whatsoever but I would like to see metal thd pro and bottom metal and bolt shrouds.
I have a 1700.00 Anschutz and it has a cheap stamping for the bottom metal. I also have a couple CZ 457 that sells for about $500.00 and $700.00 and their bottom metal is a very refined two piece unit. I suspect manufactured by the MIM process.
As I look at your rifle set-up, can you explain to me what the entire front rail and bi-pod is and does. I hate to be missing out on
something that would enhance my shooting experience.
Thank you
Shawn
Attachments
Last edited:
Tikka should call that thicc stock the “biathlon” model, not the sporter. Marketing dept was high on Finnish weed or something.
Below are the Tikka hunter and forest stocks. Pity there doesn’t seem to be a source for them, other than take-offs.
Below are the Tikka hunter and forest stocks. Pity there doesn’t seem to be a source for them, other than take-offs.
got the stock from my old T3 that I put in a chassis
here's the specs
T3x Sporter Stock
Tract Toric 4-20x50 UHD Scope with the PRS reticle
Spuhr 3001
Scope tape is Talon grip tape
Sterk wept bolt handle
APA little bastard brake
Henderson Precision 10" arca rail
MDT Ckyepod PRS legs, with a RRS SC-LR
Last edited:
The T1x will fit most any T3 stock as long as its designed for the factory single stack DBM. I have my T1x in a GRS sporter stock, and it's awesome. I've also fit it into the Mcmillan A3 that I had, a McMillan A6 that I have, and a Manners T6. They all fit nicely and make for a 22lr that fits way more like my full match rifles. The chassis rifles I know less about, as they're all set up for the AICS mags, so they may need some fitting.
MM,
It all looks really cool. It looks like Sterk makes some nice stuff for the Tikka.
Thank you for sharing your information.
Shawn
I haven't tried any SK/Wolff/Lapua stuff yet
I actually didn't get to finish my lot testing, cause it was raining the first time, then windy the next.
then came the lock down in California.
I hear people getting good results with SK/Wolff/Lapua
I might break down and just send my gun to Lapua for lot testing
Have you removed the barrel block? You may want to watch this video and resolve your accuracy
Tikka T1X review
Few recent rifle releases in Australia have been as long and eagerly anticipated as the Tikka T1X MTR. Tikka's exceptional value for money T3 family of
precisiondefenceindustries.com
Have you removed the barrel block? You may want to watch this video and resolve your accuracy
Tikka T1X review
Few recent rifle releases in Australia have been as long and eagerly anticipated as the Tikka T1X MTR. Tikka's exceptional value for money T3 family of
with the sporter stock, since it's designed for a T3, there is no barrel block
I may pillar and bed the stock though
MM,
The last thing I need is another .22 bolt gun but when I look at your Tikka, I can hardly stop myself. What kind of pull weight have you been able to get? I hope MGW still has the stocks up until June. Who has been your best after market parts source? I'm thinking that I need to sell my 45-70 to help fund my second Vudoo. Other than shooting her with the .22 insert, I just never shoot her. :-(
Do you happen to know anything about the Lithgow 1o1A. I'm drawn to the rear lug bolt design. Don't know why, but it just strikes me as cool. btw.... SK seems to work well in all of my guns but have nothing that likes Wolf. I plan to get a case each of SK long range and rifle match and one of Center X next month after the house sells. I have gotten below 6 bricks each and it makes me feel very uneasy.
I picked up this MAS 45 recently and she is a hoot. I decided to broaden my collection to include military trainers. It turns out that she is surprisingly accurate therefor I'm having a base made for her. I better start a new thread for that.
Shawn
The last thing I need is another .22 bolt gun but when I look at your Tikka, I can hardly stop myself. What kind of pull weight have you been able to get? I hope MGW still has the stocks up until June. Who has been your best after market parts source? I'm thinking that I need to sell my 45-70 to help fund my second Vudoo. Other than shooting her with the .22 insert, I just never shoot her. :-(
Do you happen to know anything about the Lithgow 1o1A. I'm drawn to the rear lug bolt design. Don't know why, but it just strikes me as cool. btw.... SK seems to work well in all of my guns but have nothing that likes Wolf. I plan to get a case each of SK long range and rifle match and one of Center X next month after the house sells. I have gotten below 6 bricks each and it makes me feel very uneasy.
I picked up this MAS 45 recently and she is a hoot. I decided to broaden my collection to include military trainers. It turns out that she is surprisingly accurate therefor I'm having a base made for her. I better start a new thread for that.
Shawn
Attachments
All Tikka's have no problem getting to 1lb trigger pull with a spring change
- I have all my guns set to 1.5lbs
- you should be able to get to about 1.75-2lbs with the factory spring
no idea on the Lithgow stuff, no one I shoot with has one
My T1x in a T3x MPA chassis. The chassis needed a bit of machining to fit the T1x bolt on mag well, and the bolt release.
She likes the Federal HV Match ammo more than others
She likes the Federal HV Match ammo more than others
