Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
To enter, all you need to do is add an image of yourself at the range below! Subscribers get more entries, check out the plans below for a better chance of winning!
Join the contest SubscribeWhat load did you use with vv 150 with the vld
How far off the lands with the 130 using Varget Trevor? With the H4350 with the compressed loads did you have problems with COALs being inconsistent?????I've had 4 rifles chambered in 6.5x47 (all by different smiths) and they all shot the same load very well.
37.5 Varget
130 VLD's
CCi450's
The two rifles I still have in this chambering both average around 2,865-2,875 fps with this load. I've tried 4350, but to get the speed I wanted it was a compressed load and showed very noticeable pressure signs.
I was using 37.5 grains of Varget for the 130 VLD but with the shortage of Varget began working loads up with IMR 8208 XBR. I may not go back to Varget.
Tag for reference too. One Q though, anyone played with regular small rifle primers when small rifle magnum primers were unavailable?
What is y'all's take on Reloder 15 with CCI BR-4 bench rest primers and JLK 123 gr bullets? I have a rifle built by Apache Arms. In the area i live in powder is worth more then gold primers are the same. Thanks in advance. I need to learn so please tell it like it is. MM
Beanland has my parts now for my 6.5X47. Shouldn't be to much longer now.I just received my Beanland build. It's a Defiance action with a 22" Bartlein M24 5R 1x8 twist barrel.
I'm launching the Norma 130's at 2835-fps using 37.5-gr of Varget. I'm seating the bullet to the same Base to Ogive length as factory Lapua 123-gr loads.
I'm stoked that my barrel is that fast as I was expecting lower velocities with the shorter barrel.
llThe C.I.P. DRAWINGS are great! I was reading on the CIP site pressures can go over 75k psi while the listed max pressure is about 51900 psi with 34.9 gr . Of VargetRe: Varget in 6.5x47 Lapua?
37.5 grains of Varget and 130 VLD's work great in an 8 twist 26" Krieger.