I decided to try switching from a Manners PRS stock to the ARC Xylo. It’s a great fit. More configurable, better weight balance.
Vudoo Gun Works V-22 Rimfire Bolt Action
- Thread starter RAVAGE88
- Start date
Just recently picked an early vudoo BA from a local guy and threw a cheap trigger, chassis and scope on it from my “ extras stash “ so I could try it out.
like everyone else I wish I had bought one sooner. It feels rock solid, mags work great, and accuracy is pretty incredible. If any of you guys are on the fence, do it !
I know a couple more groups don’t prove anything, but I was very impressed and am going to share them anyway , lol
100 yds, with cheap 10x scope
sk rifle and Lapua.
like everyone else I wish I had bought one sooner. It feels rock solid, mags work great, and accuracy is pretty incredible. If any of you guys are on the fence, do it !
I know a couple more groups don’t prove anything, but I was very impressed and am going to share them anyway , lol
100 yds, with cheap 10x scope
sk rifle and Lapua.
Attachments
Has anyone sent their action back for a rebarrel? I am thinking of going to 22in from 18in to help with balance. Seems people are, in general, getting better ES/SDs with a longer barrel and maybe less lot sensitivity? Either way, I'd get one just for better balance. Id be interested in testing a faster twist too. Though ill be shooting lead only so not interested in the copper solids.
They're solid. I put one on the px with the foreend weights and mag latch for the vudoo. Ran it in a few matches. Switched back to the ACC since I'm just now used to it.
I have always been a proponent of longer barrels on precision 22lr. I prefer 24”-27” when searching for the extreme limits of accuracy and no muzzle threads (in addition to a few other specific details). But in that I am splitting hairs with it hav very marginal gains. For the NRL22 world or similar a 20”-22” will do you just fine. I have both a 20” Ace and a 22” Bart here (both VGW barreled actions so everything else is the same) the accuracy, and SD / ES are the exact same with the 22” being 10fps slower.
I have a 22" Ace in MTU and I just got it back from Lapua. It shot 10 round groups at .262 center to center. The rest is up to me!
Ordered a 20” MTU v22 that just so happened to be in stock yesterday from VGW. Completely forgot to ask if it’s a right handed action. I would assume it is but I feel like an idiot having to email them to make sure. My excitement got the best of me 
If Its left handed and you a
If it's left handed and you no longer want it let me know so I can let JP know....my LH is in order....
Ordered a 20” MTU v22 that just so happened to be in stock yesterday from VGW. Completely forgot to ask if it’s a right handed action. I would assume it is but I feel like an idiot having to email them to make sure. My excitement got the best of me
If it's left handed and you no longer want it let me know so I can let JP know....my LH is in order....
Last edited:
I’ll be sure to let you know! gotta wait until Monday to hear back from them lol
Good job. I just ordered a barreled action yesterday and my date for arrival is 2 April 2021. Looking for a good spring.
Perhaps an obvious question but sometimes an obvious question does not have an obvious answer.
I ordered an AG Composites' stock for my V22. The stock comes with pillars but I wondered if pillars would require some final shaping. AG Composites said the pillars are shaped for a Rem 700 receiver. Therefore the question, is there a strict standard for the Rem 700 receiver geometry, by strict I mean to 1 mil, or is it like DBM bottom metal? Or, more generally, how closely do the top of the pillars have to conform the geometry of the bottom of the receiver?
Secondly, I would like to confirm what was stated in a post. The poster stated that VGW had told him that the maximum accuracy gain from bedding was achieved with pillars, nothing else was needed.
I ordered an AG Composites' stock for my V22. The stock comes with pillars but I wondered if pillars would require some final shaping. AG Composites said the pillars are shaped for a Rem 700 receiver. Therefore the question, is there a strict standard for the Rem 700 receiver geometry, by strict I mean to 1 mil, or is it like DBM bottom metal? Or, more generally, how closely do the top of the pillars have to conform the geometry of the bottom of the receiver?
Secondly, I would like to confirm what was stated in a post. The poster stated that VGW had told him that the maximum accuracy gain from bedding was achieved with pillars, nothing else was needed.
MB:
Perhaps my memory is at fault or another example of why hearsay is not considered evidence in a court of law.
What is the real intel, if I may ask? Does goo-bedding, for want of the correct technical term, further increase accuracy beyond that achieved by excellent pillar bedding?
Rick
Last edited:
the longer you wait the further it gets pushed out!
That's true. I was going to order 1 month ago and it was 8-10 weeks. One month later and 12-14 weeks. Definitely a very popular rifle. Fortunately for me it is my 2nd, but the wait will be worth it. Good luck on whatever you decide. Still hear about barreled actions being sold at some stores.
I sent a email inquiring about lead times about a month ago. VGW responded and let me know, also told me to look out at dealers. Mile High and Altus. Get on notification emails from Altus. That’s how I got mine.
Someone say lefties in stock? Who is VGW? Vudoo Gunworks?
Mile High has a RH 16.5 barreled action in stock
Yes, Vudoo Gunworks. Joann I believe was the gal I spoke with this morning. She made it sound like they may have some lefties in stock.I would call to confirm though.
Managed to order a 22" MTU from Altus today that was instock. Excited I don't have to wait the 14 weeks.
Dammit!!!! That what I wanted originally lol you don’t want a 20” MTU by chance do you?
Ah damn, i'm sorry brother. I was surprised to see it pop up as well. I had almost placed an order with Joanne but happened to see it pop up.
My new vudoo has been shipped and should be here on Monday. Plus another 4 days for the stupid background check. Should have it just after Christmas 
When did you order? I was told 12-14 weeks....I’m on week 13.My new vudoo has been shipped and should be here on Monday. Plus another 4 days for the stupid background check. Should have it just after Christmas
Last friday... they had what I was looking for in stock though. I didn’t spec out a build
First-time VGW owner, just got the new Sinister build this week. 18" Kukri (Ace) and TT diamond trigger, plus added the optional bedding in the Grayboe Terrain stock.
Got it out to the range first time this morning, started off at 100y. Though just sighting in the scope today and function testing with various ammo that I have in my stash, was already impressed with the consistency and precision. The TT which I adjusted to 1 lb is the nicest trigger I've used on any rifle. And that smooth Vudoo action is in its own category. This one's a keeper.
Optics mounting. One thing I had wondered about until I got to the range, was how it would go with the optic height and cheek weld. I intentionally picked the Sinister build with the non-adjustable stock, planning to keep the rifle a bit more compact so it could be used in multipurpose/'crossover' roles. But since it'll still be used mostly for target shooting, I wanted to mount a legit long-range optic with top magnification of at least 24x. The optic I tried today fits and has a 30mm tube with 50mm objective, so the question was whether you could run that large of an optic with this fixed-height stock and still get a solid cheek weld. I mounted it in a Spuhr LW mount, with a height of 1.18", and it turned out that was about perfect height for an optic of this size and the height of the comb on this Grayboe Terrain stock.
Ammo issue. One ammo-related issue was as I tested different ammo types, I tried some recently manufactured Wolf Target ammo and had 4 failures to fire in about 20 rounds. The Wolf fed/extracted perfectly, and the stuff that fired, was super consistent on target. But that's a 20% FTF rate in that small sample, no other ammo type had that issue. Spoke briefly with Greg at VGW, he said that recent Wolf ammo is made by Eley, and they changed it such that now, your firing pin has to strike it harder to cause reliable ignition. Because VGW rifles are optimized around Lapua ammunition specs and do not by default strike the cartridge that hard, you can get the failures to fire with Wolf. Gregg said that in general, anything Lapua, some in the SK rifle line such standard/standard+, will do well, and that some Federal ammo also does well.
Can anybody give a summary or link, to something like a ranked list of the consensus best ammo choices for VGW .22lr rifles? I'm interested not only in seeing what's considered the "best" ammo, but maybe also the best handful of top choices, including inexpensive or bulk stuff that works well. Gives more options for ammo.
From searching here, I see a few of the top choices like Center-X comes up a lot. I have a couple bricks, and some Midas which works well in my Kidd. And ordered some SK Standard+ after talking to Gregg. But would still like to see if there's a discussion or summary of what's worked well for a lot of VGW shooters.
Got it out to the range first time this morning, started off at 100y. Though just sighting in the scope today and function testing with various ammo that I have in my stash, was already impressed with the consistency and precision. The TT which I adjusted to 1 lb is the nicest trigger I've used on any rifle. And that smooth Vudoo action is in its own category. This one's a keeper.
Optics mounting. One thing I had wondered about until I got to the range, was how it would go with the optic height and cheek weld. I intentionally picked the Sinister build with the non-adjustable stock, planning to keep the rifle a bit more compact so it could be used in multipurpose/'crossover' roles. But since it'll still be used mostly for target shooting, I wanted to mount a legit long-range optic with top magnification of at least 24x. The optic I tried today fits and has a 30mm tube with 50mm objective, so the question was whether you could run that large of an optic with this fixed-height stock and still get a solid cheek weld. I mounted it in a Spuhr LW mount, with a height of 1.18", and it turned out that was about perfect height for an optic of this size and the height of the comb on this Grayboe Terrain stock.
Ammo issue. One ammo-related issue was as I tested different ammo types, I tried some recently manufactured Wolf Target ammo and had 4 failures to fire in about 20 rounds. The Wolf fed/extracted perfectly, and the stuff that fired, was super consistent on target. But that's a 20% FTF rate in that small sample, no other ammo type had that issue. Spoke briefly with Greg at VGW, he said that recent Wolf ammo is made by Eley, and they changed it such that now, your firing pin has to strike it harder to cause reliable ignition. Because VGW rifles are optimized around Lapua ammunition specs and do not by default strike the cartridge that hard, you can get the failures to fire with Wolf. Gregg said that in general, anything Lapua, some in the SK rifle line such standard/standard+, will do well, and that some Federal ammo also does well.
Can anybody give a summary or link, to something like a ranked list of the consensus best ammo choices for VGW .22lr rifles? I'm interested not only in seeing what's considered the "best" ammo, but maybe also the best handful of top choices, including inexpensive or bulk stuff that works well. Gives more options for ammo.
From searching here, I see a few of the top choices like Center-X comes up a lot. I have a couple bricks, and some Midas which works well in my Kidd. And ordered some SK Standard+ after talking to Gregg. But would still like to see if there's a discussion or summary of what's worked well for a lot of VGW shooters.
That build is 
. Is that a "spiral flute"? I'm glad you posted up man, I totally forgot to add bedding and fluting to my order I recently placed. A quick email to JoAnne got me sorted tho!
What optic do you have mounted here? I'm about to purchase the Athlon Ares ETR 4.5-30x56 (APRS6 reticle)!
Thanks!
. Is that a "spiral flute"? I'm glad you posted up man, I totally forgot to add bedding and fluting to my order I recently placed. A quick email to JoAnne got me sorted tho!What optic do you have mounted here? I'm about to purchase the Athlon Ares ETR 4.5-30x56 (APRS6 reticle)!
Thanks!
Optic is Athlon Ares BTR Gen 2 4.5-27x50 mil. Yeah the fluting is spiral.
What barrel and trigger are you getting?
What barrel and trigger are you getting?
Hi,
Ordered mine on 9/4/20. Forecast for 11/27. Arrived 12/11.
Ordered 11/19, rec'd 12/15. In this case they said it was sooner due to some barrels that came in, making mine available sooner.
For those of you that have purchased a vudoo with a proof barrel, is it configuration living up to your expectations? I’ve been bouncing back in forth between a proof barrel or a heavy fluted ace barrel to drop into my A-3 (edge fill) when it arrives the first part of the year. I’m looking more for a high end trainer that matches my hunting setups and something that I can shoot in an occasional match as my schedule allows.
This may be of interest to many here:
Tips and Tricks Videos brought to you by Team Vudoo
Hello. I recently joined the Vudoo Gun Works shooting team. In collaboration with @RAVAGE88 I/we will be doing fairly regular tips and tricks videos. Some will have to do with technical things such as cleaning and rifle setup. But this will primarily be focused on actual shooting. Things...
www.snipershide.com
Hmm, interesting....i put my order in for an 20" MTU LH and it was 14 weeks out...
It's alright, the wait time will give me opportunity to make room in the safe.... plenty of things to let go of...
Thanks for doing this looking forward to reading it.
How do you decide to dial or holdover in competitions. Is it different in a NRL22 match vs a PRS Centerfire match?
How do you decide to dial or holdover in competitions. Is it different in a NRL22 match vs a PRS Centerfire match?
the difference is a 25y-200y stage is like going from 100-1000
Similar threads
