I think there will be more cases like that coming up
-
Having trouble using the site?
Contact support
Vudoo Gun Works V-22 Rimfire Bolt Action
- Thread starter RAVAGE88
- Start date
I got my gen 2.0 just before the 360 came out. I had been waiting for the 60* bolt lift for awhile but thought they may never bring it out so I bought the gen 2. I have a T1X and liked that short 60* bolt lift and thought I needed that. Now that I have my gen 2 I'm happy. The bolt lift on my gen 2 might be a slightly longer lift but it is effortless and I feel I can work it as fast as my T1X . My Cronus is mounted almost as low as possible and I don't hit the scope when I run it. All good. I'd say if your centerfire is 90* get a gen 2 if it's a 60* get a 360.
Trigger Mounting on the Vudoo- I've mounted Triggers before, but boy these pins fit tight.
The first time I got mine I thought I was doing something wrong. I sent it back to have them install my trigger. Since then I just hit it harder
Agreed, I have driven enough R700 trigger pins to fill a swimming pool and I measured the pins and holes on the first V-22 because they were so tight. Numbers don't lie, hit them harder... Ha!
i had one of the recalled Trigger Tech Diamond triggers on my Vudoo and replaced it myself. Holy Moly I could not believe how hard I had to hit it.
I'll be joining the Vudoo club soon. I ordered my V-22 in mid-December 2020 and was thinking of upgrading to the Three 60, but my rifle was already built, the chassis already painted, and the wait would have been too long (at least 6 weeks). So I decided to stick with what I'd ordered, and I'm glad I did! Lisa sent me this photo of what my rifle actually looks like. Looks better than I'd hoped, and already shipped out on Thursday. Can hardly wait for it to get here! Should have it by Tuesday or Wednesday, depending on how long my FFL takes to process it.
Build specs:
Build specs:
- MPA BA Competition chassis w/custom *H-315 Northern Lights Cerakote (w/slight sheen)
- 40 MOA rail
- 20" Bartlein Kukri barrel (polished stainless)
- NightForce ATACR 7-35x56 F1 scope (Mil-XT reticle)
- TriggerTech Single-stage Diamond trigger (straight shoe)
- 34mm ARC rings (low)
- Large knob (also purchased a spare medium knob, just in case)
- Atlas BT-65 Cal Gen. 2 Bi-pod w/RRS BTC-Pro Clamp (on the way)
- Wiebad Cheek Pad (not shown)
- MPA RAT Barricade stop (not shown)
Last edited:
@bikeracer How far north are you? I'm in GA and its getting hot already, just curious about the it being cold enough to still have snow
Haha - it’s still Winter here in Eagle CO in the Vail Valley - we’re at 8,000 ft. Snowed last week and will snow again this week.
I'm at 5280 an it's starting to snow now. 
Here's a pic from the NRL22X match on Saturday. Cold enough to snow. Warm enough to keep the mud deep and wet. Oh how I love spring./s
This was out on the plains just South of Kiowa. East of Denver/Colo Spgs. Mid 30s until the match ended and the sun came out.
Here's a pic from the NRL22X match on Saturday. Cold enough to snow. Warm enough to keep the mud deep and wet. Oh how I love spring./s
This was out on the plains just South of Kiowa. East of Denver/Colo Spgs. Mid 30s until the match ended and the sun came out.
Last edited:
What's the over all length of your Vudoo in the MPA Chassis? I'm getting one, also with a 20" barrel...trying to see what I should get for a rifle case.
I don't know yet, since it hasn't arrived. UPS shows that it's delayed, and my FFL is closed today. Hopefully it arrives tomorrow. Might not actually have it in hand until Weds. Will post photos once it arrives, along with dimensions. I heard that 20" is not necessarily 20". Depends on optimized barrel length. Might be shortened to 19".
Haven't seen that much snow around here since the "Blizzard" of '93. We got 6" that dayI'm at 5280 an it's starting to snow now.
Here's a pic from the NRL22X match on Saturday. Cold enough to snow. Warm enough to keep the mud deep and wet. Oh how I love spring./s
This was out on the plains just South of Kiowa. East of Denver/Colo Spgs. Mid 30s until the match ended and the sun came out.
View attachment 7607585
Has anyone regretted their 22" Kukri? I'm looking for overall balance of a traditional style stock like the KRG Bravo without needing to add unnecessary weight.
I like the one I have, but I also have the heavy butt plate spacer installed. I also have a 20” Kukri and it balances a bit better offhand.
22" Kukri will still be slightly back heavy on a KRG Bravo, it's about as good as you can get though which is why I ordered a 22" Kukri.
I like my 18” in a Manners stock. I wouldn’t go any longer than 20” personally.
I have a 22” Kukri in an AI chassis. Not perfectly balanced but will still balance on a mini fortune cookie with holding it. Wouldn’t change it at all.
My Vudoo V22 arrived today. The quality is top notch!!! Very pleased! Once it stops snowing I'll take it to the range and put it through its paces (tomorrow or Friday). Really pleased with how the color came out!
Attachments
Yep...Northern Lights...but I had them add some clear to it so it would have a slight satin sheen.
Last edited:
Looking for length end to end? Give me a minute!
Overall length to end of buttstock: 38-1/2". Barrel length: 18-3/8". My requested barrel length was 20". But it looks great, and I'm sure they cut the barrel to the best length. Haven't weighed it yet.
Last edited:
Thanks. Did you measure the barrel from the face of the breach, or from the front of the action?
I think that's where your barrel measured "short" from the 20" you ordered. The barrel length should go all the way to the breach. Someone correct me if I'm wrong. Great looking build!
One thing I will say (for those thinking of using a NightForce 7-35 x 56 scope) is that both the medium and large knobs will not clear the zoom adjustment screw on the NightForce when at full zoom. They told me it would clear, but they hadn't added the screw to the NightForce scope.
Weight is 14.4 lbs with bipod. That's with the RRS BTC-Pro clamp on Atlas bipod with spikes and Wiebad cheekpad. Whoops...add a bit for the bolt and bolt knob which I forgot to put in when I weighed it.
you are right. From muzzle to front of bolt face so putting a rod down the bore is the most accurate way to measure.
Similar threads
