Custom built 6.5 Creedmoor by Radix Precision
-US Optics Foundation JVCR 5-25 x 52mm Optics (Warranty and Paperwork still valid)
-Falkor 7 Even .308 receiver
-18’ BSF carbon barrel with black Cherokee
-AG Composites Visigoth stock with limited red carbon paint
-Trigger Tech Diamond Trigger

Gun shoots amazing, light well balanced gun. Very compact, extreme craftsmanship by the builder sub MOA at 100 yards. Gun has been shot less than 40 time since building. Assortment for pictures from when I got the gun less than 3 months ago and some pictures of it in action.

Any questions feels frees to reach out, price+ shipping. Will take cash or PayPal, shipped to your local FFL. Gun will be shipped upon securing of funds. Also here locally in Omaha.

Price: $6800
Without Optics: $4200

402-850-4750
[email protected]

Prayers for the family I can’t even imagine.

Get a load of this Horse shit.

This is the weak-assed shit that the republicrats are worried about. The rino party is nothing but controlled opposition

We leave you for the weekend with those stunning pictures of a CDX-300 Lite in a sweet MultiCam Cerakote job from Shield Cerakote

Picture credit: Red Deer Shooting Centre

So fellow deplorable’s, I am asking for advice in the best place I know.

I work on appliances. I have a background in industrial refrigeration (big scale ammonia systems) and now work on basic household stuff (when your LG dies, that’s me). I work for a pretty known company, but am really considering branching out into my own. I do enough work on the side that I’m really considering it.

What does it take to start your own company? It would entail pretty much what I do now, which is fix everyone’s broken fridges, washers, dryers, etc. I have a contact with the SBA, but wanted to know if anyone else has done the same? And if so, what sage advice to you give me?

Alright everyone, I've had some requests for improved grip panels and some other pieces. What those pieces are, I want to keep secret as not to sway opinion.

A nice hide member sent out this chassis set, and I've got scans and reverse engineered all components. Now we are ready to bust out some new parts!

Ready, set, go with your suggestions.

Not sure why any of you guys are worried about all this scary gun control mess. I forgot that a Lobby group exists for this exact purpose.

I feel so much better now.

Florida man done did it again!

W

500ct 109 hybrids.

1x500: $340 shipped
2x500: $640 shipped
3x500: $940 shipped

I have a total of 14x500 available. PM me if you want all of them, I'll make you a deal.

I have a Remington 700 ADL chambered in 7mm Rem Mag that I have had for about 20 years. Over time I have slowly upgraded the stock, trigger, etc. but the barrel is still original.

To make a long story short, I just picked up a Proof CF Blank on the EE and will need to find somebody to install it. Since they will have it torn apart, it seems like the right time to have any additional work done as well. Now I am just trying to figure out who I need to send it to and what work I need to have them do.

-Who do you guys recommend for barrel installs?

-Is it worth having the action trued or any other work done while it is getting worked on?

If it helps at all, this is strictly a hunting rifle. I am not trying to compete with it and don’t want to waste money on unnecessary work. The other side is that it is sentimental and I plan on keeping it for another 30+ years.

Any information, recommendations, or feedback would be appreciated.

Nightforce ATACR 7-35x56 C578, Mil-C. Very good condition. It’s been sitting in the safe for a year. Illuminated reticle toggles red/green. Excellent glass. Bought it here a couple years ago. Includes sunshade and flip covers. $2,750 TYD, insured.

The only reason that they are releasing him is because he tried to kill a Republican. They are hoping that he will try it again.

Meanwhile, the leftist governor of California blocked the parole of Sirhan Sirhan.

As the funerals are just only starting for the victims of the Buffalo and Uvalde shootings, New York State Democrats already wasted no time at all in drafting and ramming through a package of more than 10 gun control laws all designed to further infringe on the already tenuous state of gun ownership rights in the state of New York. Among the laws passed:

* Requiring all semiautomatic rifles, including rimfires, to be sold only to individuals who have gone through a time consuming process to obtain a license similar to a handgun license.

* Increase the age of semiauto rifle purchases and exchanges (gifts and FTF sales) to 21.

* Eliminating the grandfather statute on existing standard capacity magazines, including pre-94 mags. Anyone who owns mags of more than 10 round capacity is now facing criminal charges.

* Bans the sale of body armor to all civilians not in LE and armed security professions.

* Expanded Red Flag laws to identify those who are potential threats. (Absolute nonsense since the Buffalo shooter had been glowing redder than a kettle of slag out of a foundry furnace and authorities chose to completely ignore it)

* Expand the legal definition of "firearm" to everything that can be made into operational firearms, including receiver blanks.

* Pave the way for perfection, marketing, and implementation of microstamping technology to all new semiautomatic handguns sold in the state.

* Increase social media monitoring for potential threats and increase penalties for making verbal or online threats of terroristic acts.

NONE of these new provisions include means to make it easier for people to carry defensive handguns, eliminate "Gun Free Zones", or hardening soft targets by adding armed resource officers and allowing competent staff to carry handguns.

This just shows how much these political parasites actually "care" about their constituents. Every one of the bills passed today have the potential to be abused to the point of enacting full on totalitarian control. None of them will actually reduce or prevent mass shootings and gun crime, but only further disarm the vulnerable and ensure a healthy supply of defenseless people for future criminals to exploit.

REMEMBER how fast this package of tyrannical nonsense was rammed through the mechanism of the NYS legislature, at the same time the population is demanding answers to the inflation, baby formula shortage, the border crisis, and the thousands of deaths of elderly residents at care facilities from COVID-19 due to intentional exposure, and these answers are still nowhere to be found.

Just curious.

Selling my safe queen Larue. Happy to answer any questions.

Larue OBR 7.62 18'' barrel
Larue MBT Trigger
Larue CTR with RISR Cheekrest
Superlative Arms Adjustable Gas Block
Radian Charging Handle
Gemtech QD Muzzle Brake
2 Larue 20 Round Mags
2 Magpul SR25 Mags
1 Magpul SR10 Mag
Bushnell Elite Tactical FDE 3.5x21x-50mm G2DMR Reticle FFP Mil Scope
BOBRO Engineering QD Cantilever Scope Mount

Approximately 500-600 Rounds through the rifle. Some normal signs of use.


asking $4800 OBO ( Price Reduced in thread below)

I know a lot of people love collecting guns, most they rarely use.. I do the same, sometime.

But with recent years and the events that have unfolded.. I find myself questioning some of my weapons. I've got a few rifles, mainly m1a's that I think about selling to help fund another AR, mags, ammo, plate carrier, etc etc...

Getting rid of the things that just sit in the safe and look pretty for gear that will/could come in handy with the way the world is heading.

Anyone else selling off any safe queens to get more practical gear/training?

Have some brass I’m not using anymore that I figure someone else can take advantage of.

Hornady 6GT brass. I have 237 pieces that are dirty, and 119 clean pieces. Total of 356. Has 4-5 firings on it but I ran it slow at 2850 so all the primer pockets are still good to go. When I switched barrels I also bought into some alpha brass to run with it, otherwise I would have kept running this. Asking $.50 per piece or $150 if you want the whole thing

Brand new still at my local FFL. 6.5 creed 18” barrel with 1 mag. Would love to keep it but too many other projects that need funding
$old shipped CONUS
PayPal F&F preffered
Possible trades- MDT HNT26, Mark5 PR2

Never looked through current gen night vision and want to try? Ever shot a carbine with a full power laser in the dark? Have an itch to shoot vehicle mounted belt feds and fully automatic sub-machine guns but don't want to be stuck shooting indoors at 20 yards like every other place? Want to spend the night on a 550 acre training facility with a complete FOB, military vehicles and multiple shooting areas that have you using your helmet mounted night vision to shoot inside of vehicles, maneuvering through shoot houses or throwing a grenade at a Ford F250? Have night vision but are a bit light in the 'blowing shit up' category?

Well, I got you covered fam....








Who are we?

We are the World's Only Night Vision and Machine Gun Experience. Located in St George, Utah just 30 minutes from Zion National Park and 90 minutes from Las Vegas, we are on a 550 acre secure site with multiple professionally built shooting areas, machine gun lanes, pistol areas, facilities and a FOB. We offer a personalized, guided experience centered around the use of night vision, IR lasers and various weapons systems in a unique, safe and fun setting available absolutely nowhere else.

It doesn't matter If you have had some time with night vision or have never held a firearm, this experience was designed with every skill level in mind and is completely scalable to each group or individual while under the direction of our extremely capable cadre consisting of members with United States military combat arms and Special Operations backgrounds.


What do we offer?

Upon arrival, your group will receive an overview, safety briefing and in person demonstration in the Ready Room inside of our lit FOB that is furnished, climate controlled and generates it's own power. Focus will be placed on the safe operation and mechanics of the weapons platform(s) you will be using, individual gun setup and correct technique in relation to using your weapon(s) together with aiming lasers and helmet mounted night vision. Once completed, you will be fitted with your helmet and given a demonstration on how to adjust and manipulate your night vision binocular followed by an initial dry fire routine on a square training range we call the 'Bunny Hill', to become comfortable and confidant with your setup, as well as receive any additional instruction prior to your first live course of fire.

Successfully graduating from the live fire phase of the 'Bunny Hill' now has you ready for an experience that can include:

- Shooting inside of, through or around cars, vans and trucks
- Moving, reactive and exploding targets
- 'Bonus' targets where a hit can land you extra ammunition, prizes or the infamous Russian Spetsnaz 'I shot a hostage' trophy
- Non static courses of fire where you will move between real world barricades, enter vehicles and shoot from behind cover
- Throwing a simunition M67 grenade at the enemy prior to beginning your assault on their position
- Moving inside an elaborate purpose built shoot house with a solid, breachable door, CQB type shooting, hallways, multiple inside/outside areas and moving targets
- Increasing levels of difficulty by including unknown round counts, fun penalties and timed stages where you can see where you stack up on our all time leader boards (optional)
- Driving off road through the beautiful southern Utah high desert while only using night vision in a Polaris MRZR (optional)
- Vehicle mounted IR equipped, belt fed Mk46 and M240 at our outdoor machine gun range
- Fully automatic IR equipped MP5, MP5k, MK18, M4A1
- Night optimized pistols at our pistol gallery shooting steel, plate racks, mom's microwave and other interesting stuff you've always wanted to shoot but never could


What is all included?

All guests will be issued their own individual gear for the duration of their experience to include:

- Gen3 White Phosphorus RNVG night vision binocular
- Bump helmet with night vision mount
- Helmet mounted Peltor ComTac electronic hearing protection
- Eye protection
- 11.5 inch MILSPEC M4 carbine
- Weapon mounted AN/PEQ15(A) ATPIAL (Advanced Target Pointer Illuminator Aiming Laser)
- 100 rounds of 5.56 ammunition
- Simunition M67 Fragmentation grenade
- Ammunition bag
- Chest rig with magazines
- Chemlights


Coming Soon

While we are currently fully operational and accepting new customers, we also have a few other things in the works that you may be interested in hearing about for FY2022/2023 to include:

- Experiences that will involve riding in a UH-1 at night while shooting a mounted machine gun and utilizing night vision
- Night vision long range/precision range
- Adding additional fully automatic platforms
- Formal night vision training courses


There is a lot more than just what is mention here going on, so feel free to PM with any questions or also contact me via email at [email protected]

Signed up for my first match next weekend with Pikes Peak Precision but am looking into all the gear I should be bringing. Here is what I've got to bring so far
- Rifle, bipod, 10rnd magazine
- Front bag
- Rear Bag
- Backpack
- Ammo carrier
- Tool kit
- Eye and Ear protection

Is there anything else that I should be looking at bringing or stuff that would be nice to have?

1 new 8lb jug of Varget.
$400 Face to Face in Fredericksburg Va or Thornburg Va.