This is from images of what is supposedly a brand new barrel that I purchased, seller stated there was never a round shot through it. I couldn't even identify rifling in the barrel when I bore scoped it and took these images. How many rounds would you guess has passed through this thing?

To be clear, not pointing fingers, I'm just trying to figure out what the deal is.

I am selling a Manners TF2A.
Fits Rem short action. Elite fill, Badger mini chassis. Also comes with an area 419 Arca rail and Wiebad cheek pad. The stock has 326 rounds on it, without a single mark. It’s a great stock just headed a different direction.

Asking $1250 shipped.
Prefer PayPal friends and family. I have good feedback here.

The only trades that would be considered would be an impact short action 737. In same condition.

Hi All,

A few months back I was helping a friend with a chambering issue so I posted here and everyone was a great help. Now I'm having the same issue with my rifle and I want to find out what Im doing wrong that causing this.

I created a load that worked great with my rifle, but I went to recreate the load, and now I'm having issues with every 2nd or third bullet not chambering. The bolt goes 95% of the way forward but just cant go far enough forward to close without putting excessive pressure on the bolt.

I have 2 cartridges now, one from the load I created last week, and the one from this week, both in theory should be exactly the same. The one that will chamber without issue is labeled "A" and the one that has issues chambering is labeled "B".

I took measurements of of the case month diameter, COAL to OJIVE, and the shoulder, and all seem to be the same between the two loads. Also just for good measure since I thought it was a resizing issue I took a measurement of the shoulder of a fired piece of brass form yesterday and both loads are 4 thousandths smaller then the fired brass.

Any help is appreciated, thanks!

Hi guys,need some ideas on what happened to my accuracy.rifle is a 6.5 Creedmoor,impact 747 action,manners stock,bartlein barrel,gen 2 vortex optic
Had this rifle for 3 years,always shot sub .50 groups at 100 yds,has about 900 rounds through it,clean it 400,800 rds,after 800 rd cleaning it started shooting all over,it shoots a sub .50 group then a 3” group,no consistency at all,I have been using Hornady 147 eld match factory ammo after ammo testing when I first got it,I have recently tried 3 different lots and 3 other types of ammo and no difference,I have triple checked my optic,rings,base and all good,have tried a different optic,have called Manners and tried the 65/45 action screw torque as well as other torque settings from 30-65 lbs. have had 3 ither people shoot it as well,pics below show back to back 5 shot groups shot today with everything the same.As always help appreciated.

I have a brand new Kestrel 5700 Elite with Applied Ballistics and Link. Still in original box and has never been outside.

Asking SOLD PP F&F or you pay the fees.

Chambered and installed by blue mountain precision

0 rds down barrel

Less than 100 on the action

Kreiger HV Barrel Blank 1-10 twist

No brake or trigger included

1800 TY FFL

PP FF preferred

Here's something that hopefully some of you appreciate:

Login to view embedded media
This has been kept out of the media (shamefully) so-much-so that we didn't even know this event existed or was taking place, until well past our City. Otherwise, we'd have DEFINITELY been out there showing our support and assistance.

1947 head stamp with a 50bmg bullet. Thinking it is a EXP round as it has an individual mark. Just picked it up from from the old gunsmith in "Shooter". I bought a cartridge collection from someone in their 80's. Lots of questions...

Labradar has released a new unit, the Labradar Lite, which does not have the Bluetooth capabilities. From what I have read the Bluetooth chips have been the hold up. This allows them to get product out.

For you guys that have the Labradar units how important is having the Bluetooth connectivity?

I can't find it now but someone posted an article about the fuel consumption of the generators used to make electricity for EV's. When you calculate the fuel consumption and EV miles between charges it was something like 5-6 miles per gallon. Any help is appreciated.

I have two and never unboxed this one. Love this vise and the quality so I never needed the second. Comes with full set of bushings for various barrel sizes and mounting plate. Brand new. $375 shipped CONUS. PayPal or Venmo.

Been eyeing The Colt le 6920 OEM 2 with no furniture.
I recently built a SHTF rifle and I thought, 2 is always better than one. I've never owned a Colt. Researching them for the past 2 weeks, all I'm finding is people talking about roll marks, and how they outsource parts.

I'm not really interested in a roll mark, or resale value, I've never sold a firearm, and never plan to. Are these new le6920 OEM2s something that you'd trust your life on? Are they still as reliable as the Colt of old? Just looking for some thoughts on them before I possibly scoop one up. Thanks!

Gentlemen -

I am seeking some feedback from current and or previous owners of the S&B 5-20 US and Zcomp 4-20’s specifically as they relate to gas guns.

I have a Zcomp 5-27 I use on my 2 bolt guns and love it, but am in the market for a short scope with 20x for my new 6.5 CRDMR gas gun. I have narrowed it down to the two scopes mentioned above. I do prefer the reticle on the Zcomp, as I very much like the MPCT-3X over just about anything I have ever looked through. I don’t have experience with S&B’s new ultra shorts at all, or the MSR2 reticle that has received so much favorable feedback here. The gun will primarily be used as a range toy and for matches; rifle in question is a KAC SR-25. Your thoughts are appreciated.

Up for bid is two scopes that I need to sell.
Burris XTR III 5.5-30x56 bidding starts at 1410.00 with M10 rings BNIB unopened
Tract Toric 4-20x50 bidding starts at 1010.00
This will include shipping and insurance to your door.

Trades: Kahles 5-25x56 DLR

115 for GT die. Used once,
scope caps $85 for both,
creed dies $200 new,

Selling 3 different optics that I do not use. All have a little wear on them, nothing major.

1) Vortex Venom 5-25X56 MRAD - $350 SOLD
2) Sig Sauer Whiskey3 4-12X50 - $100 BDC-1 Quadplex SOLD
3) Vortex Viper PA 6.5-20X50 - $300

This is like new. It's just sat on a rifle in my safe. I just switched to a different kind. Notched legs and spring loaded. Has the swivel stud. 75.00 shipped via zelle or PayPal f/f.

So now that I am under a communist regime in NY. They passed laws that require you to have a permit to buy an AR. Does anyone know when these go into effect? I'm eyeing a new Colt that I'd like to get.

Thanks!

100% Off Thunderbeast Certificate
$SOLD

Letting this guy go before I get too attached. Life got busy so I wouldn't be able to take it out somewhere to really stretch it. The rifle I got here from a trade with another member recently.

The AIAT is in 6.5 CM with 40 rds down the barrel by the previous owner, 900 rds on the action total, none by me since I haven't been able to take it out. 24" barrel, will come with the brake, Arca rail, spigot, additional magazine, Fix-it-Stick wrench and torque limiter for the barrel change, and additional extra high scope base.

Rings and optic are not included.

Asking for SPF shipped. Will entertain trades + cash, only thing not interested in are other bolt guns or scopes. Leaning towards pistols mostly but open to most other trade offers.