Latest activity

7mm-08 Freak · Dec 28, 2024

Part Timer said:
Although it may not be a ruler in your scope, per se, it can be used as a ruler quite easily. I pulled the below screenshot off the Leupold website and it shows what the subtensions are.

View attachment 8577718
View attachment 8577722

Your scope has the TMOA reticle according to that link you sent. If you can measure the distance between your Point of Aim (POA) and Point of Impact (POI) with your reticle, you have a rough and dirty way to measure what your corrections will be provided all other variables are ruled out.

For example, the reticle below shows a green dot for the POA and a red dot for the POI. Looking at that, you can measure the distance (in MOA) from POA to POI and, from that, know your correction needs to be roughly U2.0 MOA, L2.0MOA. Instead of thinking in clicks and inches, read the markings on the elevation/windage turrets and make the corresponding corrections in MOA like @Rob01 had mentioned, keep everything speaking the same language. The same applies for your situation between the 200yd shot with a 100yd zero. Anyway, I'm not sure if this provided any clarity but feel free to do with these ramblings as you see fit.

View attachment 8577725

Yes that is what should show up in a few days. It will be the only scope I have like that. I’m looking forward to learning to use it. Lots to learn for me.

Chipperzs · Dec 28, 2024

270 and 308 conversion kits are now spoken for pending funds.

buffalowinter · Dec 28, 2024

NHPiper said:
How does the Brownells barrel shoot? Do you know the blank?

The barrel is excellent, and I shoot run and gun with it out to 600 yds. Watch the video in my post above, it's only 100yds, but the gun shoots, even with the suppressor.

Maser · Dec 28, 2024

Blue Sky Country said:
VERY cringe representation of the leftist mindset. Some freako wearing a Bioshock cosplay with a meathook killing a helpless lady doing outdoor stretching in a ridiculously brutal fashion. Probably a clip from another one of those upcoming slasher gorefests that cater to edgy sheeple who would gladly see our guns confiscated because their fedoras and Japanese sword collections make them an alpha warrior in their minds.

You look way too deep into what slasher movies are all about. Leftist mindset? I'm like the most Right-wing millennial the Hide has ever seen! I personally love the over the top gore not because I'm a sociopath, but rather because I'm a huge nerd when it comes to practical special effects. My friends and I used to make shitty B-movies back in our early teens when CG wasn't an option and we had to improvise our special effects. Practical special effects will always look better to me than shitty CG. CG did work pretty good for the violence in the Matrix trilogy simply because the whole plot of those movies was being inside a computer program. Long live the godfather of practical special effects Tom Savini!

And finally, slasher movies are just plain fun because they are a genre of movies that don't require any thinking. It's awesome cheering on the killer in the movies to kill the obnoxious characters in awful ways. Like in the newest Texas Chainsaw Massacre on Netflix where Leatherface literally takes out a bus load of woke Leftists.

saddlerocker · Dec 28, 2024

LuvDog said:
Based on the idiot mark they probably field stripped it once and couldn’t get it back together , so they never did it again to try and clean it

What is the idiot mark? I am also a 1911 noob.

C Cape · Dec 28, 2024

No trades please

Rob01 · Dec 28, 2024

watchknut said:
It’s some farm land…338 was as far as I could get that was a clear line of site.

Totally random number

That’s cool. Was just wondering as I saw where you were from and was wondering. You shoot at any ranges in the central NC area?

Sniperwannabee · Dec 28, 2024

Hummerdawg said:
Can you still shoot on base?

Shooting Range

eisenhower.armymwr.com

How far can you shoot?

Wannashootit · Dec 28, 2024

Other than Boyd's, check out Richard's Microfit for a lot more options. Those do require final fitting/finishing though.

Maser · Dec 28, 2024

And to think so many folks thought Elon was gonna be the paragon of free speech.

Can't make fun of Jews and now can't make fun of immigration. Any guesses what's next on the chopping block?

owtlaw · Dec 28, 2024

I own 2 of those and they ate absolutely excellent. That's a decent deal.

Maser · Dec 28, 2024

I remember reading about that disgusting couple back when the story was pretty new and all the evidence was brought out in the open. Hopefully those kids will get the counseling they desperately need because young boys who go through that horror end up growing up to be child molesters themselves and the cycle continues.

308pirate · Dec 28, 2024

Milf Dots said:
Rather than optics mounting systems, dedicated milling by one of the top machine shops, for a specific optic, is the way to go. Choose a shop that's been doing pistol optic milling for years and who has a great reputation- you get what you pay for.

ATEI
Jagerwerks
Maple Leaf Firearms
Parker Mountain Machine
Primary Machine
Vulcan Machine

How many rounds through optics equipped pistols did you have under your belt when you said this?

Can you articulate why you hold that opinion?

264win · Dec 28, 2024

Up top

FatBoy · Dec 28, 2024

bf2junky said:
You get the brake and collar from Centurion?

eSilencers. I got my last one, for the RECCE from them as well and they were AE.

264win · Dec 28, 2024

hopefully pictures are up and running now..

c1steve · Dec 28, 2024

theLBC said:
their daughter didn't want to fly to iraq to marry some old man.
parents probably sold her.

Login to view embedded media

Yes, the father probably received the deposit and just needs to deliver the goods to collect the rest.

Darryle · Dec 28, 2024

They do sell the foam for the bigger boxes. The 20rd flip tops load tip down in the MTMs nestled on the shoulder. I just use sticky back fuzzy velcro trimmed to fit on anything "match or hunting". Range ammo I toss in the 100rd flip top cases. I will dig out one of the flip tops with velcro, I like it because it stays in place and cushions but doesn't put constant pressure on the case. Basically cuts out the rattling noise.

DFOOSKING · Dec 28, 2024

This 77/22 has killed more shit than the plague. I've gotten quite a few offers for this rig even before prices skyrocketed. But it's pretty dang good rig. Lightweight and super accurate with CCI Sub's.....which hit hard as fuck. Has a SFP 6-18x40mm optic that is the weakest link. Wish it had side parallax and graduated reticle. But this thing has tracked and handled abuse better than Leupold Mark 4's I've had. I'm always cranked to max or min on the magnification ring.

And although the internet likes to poo poo the mags. I've never had issues at all and it's flush fitting 10rnds unlike almost everything else out there. Timney trigger (more like a spring kit) is a must do.

This rig has a few issues. No ability for a bipod. And the gun industry as a whole has fucked me with sandpaper when it comes to aftermarket support. No rail at all let alone a canted rail.....but it's 230yds capable with this 1" tube optic. Yeah, I know a rail exists but it's stupid thick. I carry a sand sock. And I use a pack for a front rest when on a bench. In the field I use a sock or nothing. Really wish a good quality target stock was available. Boyd stocks are trash.

There definitely needs to be more hollow point subsonic offerings. Wish SK/Lapua would do one that is common here in the states. CCI standards can kill stuff but I've had numerous occasions where things got speared and ran/flew off. CCI 40gr HP's would knock a quarter sized exit wound. I never can find the Winchester 42gr HP's to really get a sense of them. If there's others out there....let me know.

I would say get barrel length. Unless it's a truck gun. It's only a plus to run longer on a suppressed rig. Keeps the ammo slow and keeps the report further away from you. I've shot/set up indoors....length has never been a real issue.

The Busby · Dec 28, 2024

$400 shipped

c1steve · Dec 28, 2024

Mike Casselton said:
We're looking into it...

HA!! That's like government looking into their own wrongdoings and concluding nothing was found.

This should not be advertised, until after the 20th. The Dems protect their own, and want future cronies to know that the Dems will not let them down. I suspect that the Biden/Dem machine will pardon Fauci before DJT is in office. Hopefully states can prosecute him for some of his crimes.

DuneBoer · Dec 28, 2024

NoDopes said:
You should fucking care. Could be you next on the side of the road and the cop thinks you disrespected him.

Did you see that POS cop that body slammed the teenage little girl for exactly that?

People get what they vote for. The wind blows before a storm.

Wannashootit · Dec 28, 2024

Don't know the MRAD specs, but visually you should easily be able to determine if it's a 20 minute or level (0) rail...

NF lists that scope as having 100 minutes of travel, so somewhere around 50 minutes "up" available. Remember that half of total travel is a rough estimate- depends on your rifle. I wouldn't cut it too tight- leave yourself plenty of adjustment when planning.

91Eunozs · Dec 28, 2024

sirhrmechanic said:
That'a s keeper!

Class watch? Or just one of the USAF special "PX" editions? They made some cool ones! Much sought-after!

Very nice!

Sirhr

It’s basically a Blackbird Chronomat with a different face and hands… They do limited run/special editions a couple times every year it seems; this one was for the USAF’s 50th Anniversary in 1997 with a total run of 500 watches.

I graduated from the Academy in ‘88, but used to wear that watch to reunions, dinings in/out, etc. after I got it.

NHPiper · Dec 28, 2024

buffalowinter said:
USSOCOM Mk12 Mod 0 Special Purpose Rifle
5.56, NF NXS 2.5-10x24, Allen Engineering Suppressor

Clay targets at 100 yds

Colt m16a1 lower
Colt upper
Brownell's Mk12 SPR 5r rifled barrel
Allen Engineering brake and collar for Allen Engineering suppressor
Gas Buster charging handle
M16a1 original surplus stock
Precision Reflex carbon fiber handguard
Precision Reflex gas block w/ front sight
Swans #40 buis
Colt bolt
Harris Bipod
m16a1 grip
Nightforce 2.5-10x scope w/ swans rings
Vortex red dot
View attachment 8577886

How does the Brownells barrel shoot? Do you know the blank?

Having trouble using the site?

Site updates coming Wednesday, 1/29 at 8am CT!

Latest activity

Latest activity

Filter