Considering getting a FX120i and manually throwing powder and trickling up. Was considering a rcbs chargemaster supreme but I believe the fx120i would be more precise and leave me options for upgrading in the future. If you do something similar post pictures of your setup.

WTS LEUPOLD MARK 4 SPOTTING SCOPE 12-40x60MM *INVERTED H-32 RETICLE w/ CADEX CAGE MOUNT and SOFT CASE $2300 Shipped

$250

34mm

Hi

What are your opinions on rechambering a barrel that has been burnt out?
On the range, someone suggested that a burnt barrel can simply be rechambered and used again, of course setting it back an inch or so.
Someone else also mentioned that it's not worth it since the rest of the barrel (beyond chamber) is used up as well.

I haven't switched barrels yet and this would be the first, so I thought I'll gather views before going with it.

It'll be for 6 Dasher and a 284.

Thank you

WTS:

Atlas 5-H Bipod w/ Area 419 Arca Clamp & Adapter

$475.00

Offering for sale a Viper PST 2 with EBR-7C reticle in MRAD. Barely used. Excellent results.

Including MPA Bolt One-Piece Mount with Level. O MOA. 1.125 inch height. 30mm tube.

$800 OBO. No box. Buyer pays shipping. Separately without mount $650 for glass.

160 sold. 280 left. $300 shipped. PayPal Friends and Family or you pick up fees. No notes.

I will only ship to lower 48 and where I am not violating state law. Please know yours. Thanks!

Have for sale a used CHAD. Great condition only used in a couple matches.

I’m putting together a 22 rimfire will be using a Vudoo action with DI precision barrel. Mounted to a MPA matrix pro chassis. I’m not doing any type of competition shooting but looking to get out there 300 yds or so. That are you guys using for a scope.

I know it maybe a long shot but I came across a 6MM AR TURBO ACKLEY IMPROVED complete upper and would like to try it so I need a set of dies. I know Hornady made them in the past so please let me know if you have a set you are willing to part with.
Thank you

6.5 PRC built on a Lone Peak Fuzion Ti Medium Action with Nitride bolt
Ag Composited chalk branch stock
Triggertech special flat 2 stage
Bartlein #13 carbon 24" 8 twist chambered by Manzella Precision .188 freebore AW2 reamer-150 rounds threaded 5/8-24
Hawkins M5 bottom metal
MDT 10 round and 5 rounder included.

Scope, rings and bipod not included.
$4000 buys it!!
$3900 Buys it!

Was used on my 22lr and I shortened the barrel so I don't need it anymore.

$80 shipped via Paypal F&F, Venmo, or Zelle

Hey guys,

I was browsing Manners and trying to figure out what kind of camo to put on it - well actually it's already placed my Group Buy for the PRS - TCS, which I got in Elite Tac High Plains Molded (which I don't really know what looks like). Thinking ahead if I ever do place another order, I'd like a better understanding of the colors.

Altus does a great job showcasing their colors - Login to view embedded media but Manners' website just has these little swabs that are hard to imagine.

If you guys don't mind, can you post a pic of your Manners stock and the actual color name?

Thanks in advance!

Doing some safe cleaning. Offering for sale - all have been used. Rings have some scuffs from torquing

Nightforce 30mm Ultralight Cantilever Mount in FDE 1.54 inch $175 ($150 off retail)

Nightforce 30mm Ultralight Rings in FDE 1" $75 ($95 off retail)

Nightforce 30mm RAPI Rail Accessory in Black with under-ring $105 ($70 off retail)

Troy Off-Set AR-15 Iron Sights with Diopter 45 degrees $130 ($80 off retail at Optics Planet)

Buyer pays Fed Ex shipping (estimate $15 for ground).

Bought it new from Eurooptic. Mounted on my merkel but never shot it. I have the same scope with a plex reticle now on the merkel. I'd sell either but I kept the box for the 4a reticle so I'll try this one first. Don't need two of the same scope.

$625 shipped

As the title states, looking for a 18” or longer M27 tenon 308 or 6.5CM barrel for my AT-X. Open to all mfrs, no carbon.

Will only purchase from members with verifiable feedback on here or other sites. Scammers will be reported.

- Atlas BT65 bipod
- arca QD mount for the BT65 (area 419 or similar)
- MLOK to arca 10" plate/rail, MDT or similar.

Name your price, open to similar alternatives as well.

when messaging me, answer this riddle, do not paste in comments below:
if the blades of grass around your target are all bending and pointing to the right, where should you hold?

I have a Leupold mk4 spotter setup for sale with the following adds: badger SLICK system, Badger slick 45 degree red dot adapter, Leupold DPP red dot, kestrel holder for SLICk, Badger camo protective case for spotter, Vortex impact 4000 parallel zeroed for ranging capabilities. This setup is ultra functional. Would consider separating vortex impact. Asking 3200 shipped for the setup.

Selling a L size Juggernaut phone ENDVR chest mount. Attached is to the molle webbing on any vest or plate carrier. Price is shipped CONUS

$55

Selling my carrier. About 5 years old but no wear, used sparingly for range days. It is the Velocity Systems carrier with Spartan Armor Systems front, back, and side soft level IIIA armor. They are at the end of the manufacturer warranty for defects but doesn’t mean they instantly won’t work!

Asking $175 $150 for the carrier and another $125 $100 for the armor inserts, pending your state’s laws.

I have the following XLR items up for sale. All prices are shipped when paid through PayPal FF or Venmo

1) XLR Envy Pro chassis $775 SOLD
- Cerakote Black / Tequilla Sunrise
- R700 SA
- Ergo grip
- Includes bag rider, buffer tube weights, buttstock weight, new foam cheek pad, and short and long nose extensions. Happy to swap in any of the other buttstocks for the Envy buyer I if they havent sold. I am also happy to swap out the orange night vision bridge for the original black one.

2) XLR TR2 Buttstock (2 Available) $175
- Factory Cerakote Tequilla Sunrise SOLD
- Custom Zombie green cerakote
- Each includes 1 buttstock weight and 1 set of buffer tube weights
- New foam cheek pad

Trades:
- TMB Gen 2.5 brake
- Berger 109s
- Swaro outdoorsman
- Foundation Centurion for Fuzion action

Lapua 308 brass. 1x fired in an AI rifle. Large primer. 97 pieces. Tumbled, ready to prep/load.

$70 shipped. Paypal preferred.

Older model preferably max power 17/22/25. I have 2 now and I know what I paid and see them for on here so if your looking for $1800-$2000 I am probably not your guy. Thanks!!

We have stainless CHAD muzzle brakes in stock. Some with tuner and some without.

Login to view embedded media
You get charged and sued and your qualified immunity pulled that means damages come out your pocket asshole .

Such fragile egos that they can’t help beat and arrest someone having a stroke.