An ultra rare Israeli Swiss K31 sniper rifle recently sold for $35,000 plus a 17.5% buyer's premium.

Damn...

ARC M-Brace, 36 mm, 1.5" height, 10 moa cant. Included is an ARC LRF bridge.

$250 shipped. No trades. Discreet PP F&F (preferred) or venmo.

For sale is an MPA BA Comp Chassis. Originally Black, rattlecan/sponge-camo on top (navy, light blue, fde, orange). Original finish has only a couple small marks in it. The rattlecan finish looks good and will wear as you'd expect. Easily citristripped if you want to go back to black.

Includes NVA Bridge and Spigot (neither painted)

$550 shipped Paypal F&F. --SOLD--

30mm rings, 1” height. Came off scope I sold.

$150 shipped

PayPal friends family

In excellent condition, comes with:
1. Spigot mount
2. ARCA rail
3. Gray ops weights
4. Weibad cheak pad

$1000 shipped, I’m firm on the price with all the extras and high shipping cost. No trades, PPFF

Thanks for looking…… Rodney

I was hoping someone out there could help me confirm the use of an EOtech EXPS3 and a Steiner DBAL D2 on a GBRS Hydra mount. I would like to get one for my setup but it looks like the optic rail section, for the EOTech, is lower than the LAM rail.

The DBAL is a pretty tall LAM so I am
Concerned with how much sight picture is going to be lost.

I could always run a small riser on the hydra? The problem here is is jacks up the magnifier heights and options.

Maybe I just need a new LAM.

[SOLD]
I have a McMillan Game Scout inlet for impact short actions, I picked it up here quite a while back.

It has an adjustable cheek and M5 bottom metal cut. Short arca section and pic rail for bipod attachment.

I’m not exactly certain of the barrel inlet but here’s what I know. A bartlein remvar carbon fiber profile gently touches near the muzzle, so you would need a relatively thin profile or do some work with a dowel.

$350 shipped.

Looking for a Short Action Customs modular die and a decapping mandrel for a 6bra. Hopefully a .266 shoulder bushing and a .2415 decapping mandrel.

I have had a few requests for a Wilson Inline seater die organizer so here are the options. Prices are TYD. Custom requests welcome, just takes a little extra time and $$ depending. Colors are going to be primarily black or red, if you don't specify I will just ship what I have. You can see dimensions in the images also if you have any questions regarding so.


$32 Wilson inline seater die organizer: The organizer will hold 5 of the inline seater dies. The cup, or bottom of the die will sit in the bottom of the organizer and then slide the die in from the top. This can be sat on top of a bench or mounted to the wall via two #8 screws.

$42 Wilson inline seater die organizer with Lid: This option adds a lid to the organizer. The lid shown In one of the graphics images is translucent to show how it covers the organizer. The actual lid will be a solid color matching the organizer. This can still be mounted to the wall or sat on the bench with the cover on.

I have had a few requests for primer tube holders. Incase anybody else could use one here is what they are. Price is TYD. Color will be black unless a custom request is made. Thanks.

As always if you have any questions or other custom requests let me know.

$18 Vertical Primer Tube Holder: Has 7 slots that are capable of holding 3 primer tubes each. Can be mounted to the wall via two #8 screws.

$20 Horizontal Primer Tube Holder: Has 7 slots that will hold one tube each. This will work well for anybody that can’t hang them vertically. This is mounted to the wall Via 4 #8 screws.

$25 Horizontal Primer Tube Holder With Tray: Has 7 slots that will hold one tube each. This will work well for anybody that can’t hang them vertically. This is mounted to the wall Via 4 #8 screws. Has a little tray at the bottom to hold any miscellaneous accessories.

Items other members have requested.

Ive been printing some custom loading blocks for stuff I load and a few friends. If anybody is interested I can print some up. If you have any questions or custom request let me know. red or black color, if you don't specify or care I will send what I have available. Price is TYD. Can customize label to say whatever you would like or nothing at all. Custom request always accepted also.

Labeled stadium style: Holds 50
$20 9mm
$23 5.56
$23 308
$23 6.5 Grendel
$27 Magnum
$27 Lapua (338 Lapua size)

Large Flat Tray:
$25 Rimfire Holds 100 Pieces
$30 223_5.56 Holds 150 pieces
$33 308 class cartridges 100 pieces
$38 Magnum class cartridges 100 Pieces
$40 RUM Class Cartridges 100 Pieces

Other items people have requested:

Great condition Panerai sub in 42mm. Very little wear time. It was purchased from crown and caliber. It comes with box and accessories but no paperwork. I found another I’d like to pick up and moving this one would seal the deal. If you need any other pictures or info just shoot me a message. Not really looking for any trades. 5000$ shipped and insured. I have it registered through Panerai also, I think the limited extended limited warranty ends 11/09/29.

Thanks

Brett

Selling my XTR 3i 3.3-18. Has the illuminated SCR 2 Mil reticle. I have the original box too. No rings. $750TYD. Insurance on buyer

AI .308 Barrel 18" - New Pull - $350 OBO - Shipped

Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.

Norma Shooters Pack 6.5 Creedmoor Brass Box of 100 - 4 x 100 Bulk Box - $155 Shipped

Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.

Tikka ctr 6.5 20” barrel with 100 rounds of eld m down the barrel
Manners LRH
Leupold Mark 4HD 6-24x52 (34mm) Side
Focus FFP PR2-MIL Riflescope
Hawkins rings with Hubble level
Mountain tactical trigger spring

Comes with original stock and leupold box
Shoots sub MOA hornady 140eldm. Thought I’d do some shooting comps with my brother but never panned out. Fantastic rifle.

Not looking to trade
$3500

Located in ATL

Thought I was going to put a RUM together, but need to free up some funds for something else.
26” Crown Ridge carbon fiber, 10 twist, 5R, with a remage nut, muzzle threaded 5/8-24.
Bought it lightly used, has no more than 300 rounds on it. Not sure who did the barrel work.

$500 shipped. PM me first, I will not PM you. Anyone else is a scammer.

Hey all. I’ve got a 27 inch factory AI barrel in 338 Lapua Magnum. I need a barrel for this rifle that is 300 Norma Magnum. I’d prefer 20-24 inches but will take anything I can find up to 27 inches. I’m extremely open to Proof Carbon or steel as well as factory AI barrels. If you’ve got Carbon I’d toss in some cash.

We would each pay shipping of our own barrel. My 338LM barrel is DE color and has 50 rounds on it. There are some scuff from the safe and I can send pics to potential trade partners. Threads are immaculate. No muzzle device included.

Holler at me if have something to trade here.

I guess I could be talked into other barrels such as 6.5CM or 300PRC but strictly looking for 18-24 inches on those. M30 threads only please.

New
Comes with Sinclair Speed Screw,SINCLAIR GENERATION II BENCHREST WINDAGE TOP. You get two tops. Extra EDGEWOOD SHOOTING All-Purpose Rest Top Bag. Benchrest feet. I paid over $700. I like to get $500 for it.
Thank you

Bedded for a big horn origin barrel channel has been opened up to a heavy varmint profile weight is with impact branded m5 bottom metal action screws and srs 4 inch hunter rail comes with everything pictured minus bipod 600 tyd lower 48

I have a 300 NMI (35 degree shoulder) anyone know what pilot # I need?

sold

Details:

I have a Origin short action and a Peak44 Bastion stock that’s channeled for Remington Mag Sporter profile barrels which will not fit carbon barrels. So overall my goal is a 20” 300WSM steel barrel threaded to 5/8x24 that’s as light as possible that still makes a good suppressor host, and fits in my Peak44 stock. I’m hoping for 2.5# or less in barrel weight, so I may have to flute it, and or have the barrel profiled back out at the muzzle to be able to thread it 5/8x24. This is going to be a hunting rifle, not a range toy.

What profile would you pick for such a project? Flutes, or no flutes? Flare at the muzzle for threads or not needed?

If you have such a barrel, do you know what it weighs? How do you like?

I know, I know, the carbon barrels are all the rage and the easy button, but they are expensive, I would have to buy a different stock, and they are really not that light at around 3# for a 20”.

Here’s what I’m working with stock clearance wise:

Anyone doing it ?

A few years ago, Sierra came out with the 169 SMK in an attempt to iron out the short comings of the 168 SMK especially past 800 yards.

Has anyone worked up any loads for .308 with the 169's that they have shot past 800 yards? Do share.

My pet load for .308 WIN 168 SMK's (300-600 yard) in a bolt rig is: 45.0 grn of VARGET, Lapua Brass, Wolf LR primers. 2.800" or mag length.
Barrel: 1-11 twist Bartlein (30") with 95 Palma chamber.

I hope to use the 169's with a similar load and have it print well at 1K. -S