Aero Precision M4E1 Enhanced upper and handguard, Odinworks 6.5 Grendel/6 ARC BCG, Odinworks 21” heavy barrel and rifle +1 adjustable gas block, BCM charging handle. 250 rounds through it. Brake not included. $800 plus shipping.

Faxon 24” barrel with rifle length adjustable gas block. 100 rounds through it. $250 plus shipping.

Sig Sauer Tango6T DVO 1-6x. Comes with mount, caps, ARD, and original box. Was mounted for a couple range sessions and has a couple small scratches. Glass is perfect. $1700 plus shipping.

Brand new Norma 9mm Frangible Bullets (not loaded ammo)

$47 + Free shipping / 1,000 ct (4.7 cents each)


These bullets are copper-polymer matrix (same composition as the Inceptor ARX).

Introductory BLACK FRIDAY Price Period + Free Shipping

The bullets measure and weigh on the smaller side, but are all within SAAMI spec for 9mm bullets. Our average weight was roughly 92gr and measured about .353" diameter. These are the same bullets norma uses in their frangible load marketed to Military / Law Enforcement.

Bullet size is roughly that of a 147gr RFN. Loaded ammo picture for size comparison only.

PTG m5 short action bottom metal. Has a few small marks but they can't be seen once installed. No screws. $110.00 shipped. PayPal G&S or postal money order.

Hey so I have an NX8 4-32 F1 MOAR and have had it for about 2 years now and earlier this year it seemed like I couldn't get the target image to focus as well as I got accustomed to. So I sent it in and they said the internal focus ring broke so they fixed it and sent it back. It was all back to normal until the other day seems like the same thing is happening again. Have any of you guys every experienced this issue?

I have a RWS Diana I bought probably 30 yrs ago. The plastic trigger snapped right where the screw goes in. Looking to buy a replacement trigger assembly. Is there a website that sells these? My Google fu keeps coming up with places that just sell the entire rifle. Thanks!

WTB 10 Badger Ordnance EFR Mounts.
If you only have one or two that's fine as well.

PM me and we can work out a deal.
Thanks.

SOLD WTS a set of ARC 36mm (24mm Low) M-Brace Scope Rings. Perfect condition $$ Price includes shipping to the lower 48. PayPal F&F for the form of payment.

SOLD - WTT or WTS ZCO Slimline 6Mil 36mm scope mount. Would trade for same condition ZCO Tru-Loc 36mm .98”height rings. $$ shipped to the lower 48. PayPal F&F for the form of payment.

“Back in the day” we had a list going for the front and rear measurements to identify all the one piece AI mounts cant (MOA).

I specifically need the measurements for the picatiny models but it would be nice to have all the measurements for both the dovetail and picatiny models.

If I recall it was 0moa, 18moa, 30moa and 45moa options available. Am I correct?

Help and old man out!!! Getting old sucks.

TIA,
RR

Great condition only took out of the house a couple times. New foam insert ready to cut for your setup. $225 local pickup

Located in central ohio

Finish reamers for sale, all are interchangeable pilot. No solid pilot reamers here. All come with a nominal pilot. All were either prebored or roughed reamed before reaming. Just cleaning out some extras and duplicates that I have.

Top to bottom:

6.5 Creedmoor, PTG, SAAMI spec, oil groove cut in pilot screw, has cut 6 chambers. $50

25-06, Clymer, SAAMI spec, has cut 1 chamber $90

6.5 Creedmoor, Manson, SAAMI spec, Brand new $100

6 Dasher Norma, .272 neck, .104 free bore, PTG, brand new $100, don't try to use this with alpha brass, you won't like the results

6 Creedmoor, PTG, .275 neck, .109 FB, oil grooves cut in pilot screw, 4 chambers cut $60 this is a shorter than SAAMI free bore for varmint bullets

22 Creedmoor, PTG, .249 neck, .040 Freebore, 3 chambers cut, oil groove cut in pilot screw $70 this is a tight neck, you will need to turn necks

6.5 PRC, PTG, SAAMI spec, 1 chamber cut, oil grooves cut in pilot $100



Will only accept PP f&f or Venmo gift. Prices include shipping.

So I attempted to work up a load in my 30-06 with a 212 eldx bullet and didn’t have great luck. I seated the bullet 20 thousands off the lands to start with like always and had powder crunch when seating bullets and pretty noticeable seater marks on the bullet. Specs as follows.

CBTO 2.613
Norma brass (new)
Cci 200 LRP
212 grain eldx
51.5 grains of h4350
Worked up to 52.5 and got slight ejector marks so called it a day. Book max is 53.3
Barrel is 26” long and was getting 2600fps

I have some 208eldms I could try but would expect similar results.

Just out of curiosity I loaded up some nosler 180 grain at the same seating depth with 54 grains of h4350 and it shot a .2” group with a muzzle velocity of 2750 no seater marks and no powder crunch when seating. I understand the 212 eldx is a long bullet but how in the world are people getting 2800 fps out of it or the 208 ELDMS (I haven’t tried these yet).

Looking to sell this perfect P2. Brand new, never mounted or fired.

$525 shipped conus to your door.

Was planning on using it for a new project but decided to go with an Eotech instead.

Not looking for trades. Price is firm.

I have a .264 (6.5) Titanium Nitride CHAD muzzle brake I’m looking to sell. Looking to get $500 shipped brake is phenomenal I just decided I’m sticking to suppressed.

Up for sale is my Tac A1 chassis, included is:

2 original mags
Original grip (not pictured)
Ergo Deluxe FDE grip
Pic scope rail for chassis (not pictured)
5 slot pic rail
All original spacers (not pictured)
Hardware (not pictured but includes action screws, handguard screws, scope rail screws, etc)

Only seen range trips, never fielded, taken to a match, etc. Two small marks where the chassis folds that they all suffer from included in pics.

$sold CONUS

SOLD

Ai ax
6mm creedmoor barrel.
Rrs arca mount and weibad check pad
400 rounds through it.
Shoots like an ai so don’t have to brag it up.
Will not include optics or can.
$5600

Always open to trades, never know just ask.

I can ship to your FFL, or can do local pick-up in the Huntsville, AL area.

1. Black Mega Forged Lower - includes vltor a5 buffer tube and FCD takedown pins, end plate, castle nut, and buffer retainer. Like New $185 Shipped

2. Black Aero M4E1 Lower, like new $98 Shipped

3. Black Aero M5 Lower and upper with Aero upper and lower parts kits installed (minus safety and FCG), like new $230 Shipped

Nevermind the asswhooping that Jones gave Stipe last night or the blow-the-top-off response to Trump and his team being ringside, the post-fight interview with Rogan with all praise being given to the Lord brought a tear to my eye

Login to view embedded media

LEUPOLD Mark 5HD 3.6-18x44 PR-1 MOA
Like new. Pick this up and took it out to the range 2 times. It’s been so long since I’ve shot MOA and have decided to keep everything in mil.
$1300 shipped and insured
PayPal or Venmo.

BA Comp chassis in Tungsten color for Remington 700 SA with full internal weights plus extra large bag rider and rear weights, front spigot and night vision bridge, Wiebad cheek pad. I've been running an Impact 737 in it. Used but not abused. $695 shipped CONUS. Venmo, PayPal F&F or add 3%.

Moving sale
Benchmade adamas fixed blade (no Paracord), lightly used but near new SOLD

Benchmade SOCP seatbelt cutter and window breaker. $70

Gerber empower, lightly used. $125

SAC 0.2625 Mandrel - $35

SAC 0.2415 Mandrel - $35

SAC 0.2225 Mandrel - $35

WFT2 Cutter - $50

WFT2 Carbide endmill - $30

WFT2 6.5x47L chamber - $15

WFT2 22creed chamber - $15

Imperial dry neck lube kit - $15

All items are either mint or unused.

Payment methods options are PP, venmo, and zelle.

I have 4 triggers for sale. All of them old style with the grooves on the face of the triggers.
1 includes the bolt stop release mechanism and the safety, 3 do not.
1 is stainless. This one was stoned by a gunsmith before I bought the gun it was on, see the picture.
All have been adjusted since the factory adjustment. Check on your gun to make sure everything works correctly before using. I take no responsibility for your failure to ensure they are working properly on your gun before use.
$45 shipped for the one with the bolt stop & safety
$40 each shipped for the other 3.