Absolutely nothing wrong with the unit, everything works perfectly.
Refer to the photos below for model #

1300 shipped

20” .223 Wylde White Oak Armament SPR barrel brand new/never fired, thermo fitted into a BCM upper with a Odin Works 17.5” Ragna mlok rail (super light weight.) Barrel is 1/8 twist rifle length gas sys. with the required step for the ops inc collar. Bolt was matched/head-spaced by WOA and sits in an Odin Works 158 carpenter nitride carrier. With an Odin wrks extended charging handle.

Throwing in a Vortex Diamondback 4-16x tactical ffp mrad Christmas tree reticle sitting in a leupold mount.
Stretch 223 to the max with this set up.
$630 obo shipped. Accept Zelle

Like new Gunwerks Magnus GLR SS rifle chambered in 6.5 Creedmoor with carbon Magnus stock and Carbon 24” barrel. AICS bottom metal, Gunwerks directional muzzle break, Triggertech Diamond 2 stage currently in it. 100 rounds down barrel.

>> Would trade towards Accuracy International rifle.

**Scope and Bipod Not included.

$SOLD Shipped and Insured

All the folks across the nation that have been arrested for DUI while 100% sober so the pigs could get free pizza are starting to sue the municipalities that unlawfully arrested and charged them with crimes they were 100% innocent of . And the tax payers will foot the bill . And suddenly for no reason at all folks fucking hated them

The Title says it all. And you Scammers can go Fuck Yourself.

WTS a LNIB Leupold Mark 4HD 6-24x52mm with a PR3 MIL reticle, it is in a Vortex 20moa cantilever mount. I mounted the scope, zero'ed it and it has sat in the safe since. Added a turret tape with the hopes of shooting a

SOLD

View attachment IMG_2078.jpegView attachment IMG_2077.jpeg

Looking for a Magnus RR K Series Thunder Beast. Please let know know if you have one available.

Thanks

Selling a really cool, factory AAC MPW upper. The upper features a 9" AAC 300blk barrel and rare KAC URX 3 rail. An AAC branded, nickel boron coated BCG and fde URX rail panel set is included. Comes as shown, minus the Q Cherry Bomb muzzle device.

Sold

No trades please.

Looking to see if anyone can tell me what the load data for Lapua 6BR ammo with the 105 bullet is. What powder and amount along with primer. The rest like oal I have.
The ammo shoots so well I am trying to duplicate it.

The squirrel in the head thread from a few weeks ago got me back in love with some of my old .22’s. And thinking about a “project” I always wanted to undertake with a .22.

Since I was a kid, I saw articles and later some videos of the husband and wife team Ad and “Plinky” Tooperwain. They were exhibition shooters for, among others, Winchester.


I always wanted to find one of his tin Indians. Shot with a Winchester pump or auto at 25 feet in front of a crowd… then the “Indian” was presented to someone in the audience. There is a Topperwain at the Buffalo Bill museum. And the only two I ever saw outside a museum were in a gun club “clubhouse” in Raleigh, NC.

These were shot with iron sights. Seated Offhand. As fast as Tooperwain or his wife could load the rifle. At 25 feet. No dots to shoot at. He just shot the tin with the “pattern” in his head.

Here’s a couple of examples.



So having given up on owning a real Topperwain (they sell for thousands now), I am going to make my own. And it got me thinking that the world needs more tin Indians not less. And it might make a good Snipers Hide “exercise.” Kind of the ultimate rim fire dot drill!

So challenge rules. Really? Rules? Only one. Must shoot at 25 feet or more. Can use a dot template. Can use a scope. Can be as big or small a piece of tin as you like. Can lay paper on the tin with a pattern on it. Can be prone. Can do on indoor range. Can do in .17 or even a center fire if you want. Can use rests, bags, anything.

The only thing that matters is you get a good Indian head that would make Ad Topperwain and his wife “Plinky” proud. Btw, her name is where the term “Plinking came from. She was a trick shooter, too.)

Login to view embedded media
At the end of the challenge… you get a piece of wall art that will make your friends go “wow” and a great sense of satisfaction.

Any takers? @buffalowinter ??

Cheers, Sirhr

PS. Already plotting my strategy…. Winchester 52 target. Copper sheet with a paper template (though I will practice before using the copper!!!) And lots of time to get it right. Btw, for templates, any local Kinkos or Office Depot can take the above images and blow them up and make several copies cheap.

PPS... if you want to do a different image... that's fair game too! He did Uncle Sam, Custer... others. Use your imagination!

Selling this guy for $100. Comes with one spacer.
PP, Venmo, or USPS MO.

Not sure how it all works, heck in the last recession I bought my first new vehicle and thought $500 over invoice at 0% was how you bought a new truck all the time.

Saw a video where the WH Press Hottie said “May 5th…involuntary collections ”

I bet they made sure it was a few days after rent was due so landlords get paid. Car notes it’s the other hand, maybe they won’t get paid.

Never been in collections so idk how that goes either. Just curious if this will change anything. I’m sure the sage of the Bear Pit will derail this anyway.

ATll sold

They had a trip back to Vortex 2 years ago. My eyes aren't the best so I think there may be some dust micro scratches on lense. But if there is, they are very faint and to me can't be seen through the lenses. I just want to be honest. I've had them for 4 to 5 years and no longer have lens caps and such. They will include the RRS tripod strap. $550 shipped

525 Sporting
This is one of the best feeling guns I've had my hands on. It's right handed with a palm swell. It just don't fit me like I want it to. I've shot it a few rounds of sporting clays and have really enjoyed shooting it. It's a super nice gun with some handling marks as just about any wood gun you use will have.
32" Rhino Ported barrels
Adjustable comb with the spacers and tools
Adjustable trigger
Has a kickeez recoil pad that could probably stand to be replaced, it's getting a little soft.
Gun will come with 7 muller chokes. That's about $800 in chokes alone…
2-U0
2-U1
2-U2
1-U3
Asking $2250 shipped for it

Ultra sport plus
This gun is also super nice. I've shot it a few rounds of skeet and sporting and I have the same problem with it. It just don't fit like I want it to. This gun shoots like a dream with little recoil even with the 1 1/8oz 1250s. I know, not usually what you get with a browning lol
It's right handed with no palm swell. It also has a few bumps but nothing major at all.
32" Rhino Ported barrels
Adjustable comb
Adjustable trigger
Decelerator pad on it
This gun comes with 6 factory gold ring chokes.
1-skt
1-ic
2-IM
2-F
Asking $1850 ahipped for it

I personally think the 525 is the best sporting model browning ever produced. Me being a 15 7/8" LOP, neither of these guns will satisfy that without putting a 1" plastic spacer with a 1" pad in the back of it and I just don't want to do that. I'm selling both to fund another shotgun I found that "fits" me.

I've had problems uploading pics for some reason. If there's something else you want to see I'd be happy to send whatever pics you need.
Thanks

Pat

As the title says.




1) The original blocky, squarish layout



2) The second, “ribbed” design



3) The most recent iteration

Any advice on removing 8.6 Blk brass from a Seekins SP10 and Mos-Tek barrel?

I was shooting suppressed 300 gr and the shot sounded louder than the others. Doubtful a double charge of A1680 but anything is possible I suppose.

The bolt is about 1/8” or so open (see pic) but actually ripped off one latch of an ambidextrous Geiselle Super Charging Handle the bolt is so stuck. The latch is open though on the CH so that’s not preventing it from opening.
I used spray lube and a solid brass rod with a lot of force and still not budging.
Considered removing the barrel but not sure how that would be affected by the bolt extractor holding the stuck brass.
Thanks.

Selling an AX AICS chassis for Remington 700 LA. Black and FDE skins, comes with 20 MOA top rail for the forend and 20 MOA AI scope base for Remington 700 actions (6-48 screws). Fantastic chassis, had it set up for a USSS JAR clone, but snagged a mk13 Mod 7 chassis. $1625 shipped with everything pictured. SPF

I dig all these bullshit restrictions getting uplifted. It defies logic and reason how firearms could be banned in post offices, yet you can legally bring in one to ship that you're still clearly in possession of. A little piece of absolute fucking stupidity removed.

Mizelle said that while post offices have existed since the nation's founding, federal law did not bar guns in government buildings until 1964 and post offices until 1972. No historical practice dating back to the 1700s justified the ban, she said.
Mizelle said allowing the federal government to restrict visitors from bringing guns into government facilities as a condition of admittance would allow it to "abridge the right to bear arms by regulating it into practical non-existence."

Click to expand...

Modlite PL-350 pistol light with the g2 switch bar.
Comes with new OKW head, new battery, and charger.
$275 250
If you want a plhv2 head I’m happy to swap for a used one, and drop price to 250 225

If you’ve got a grey ops GT or standard mag in partial trade we can make something happen

$old $750 shipped

For Sale: Like new in box MPA BA comp Chassis.
This was a prize table pick up, and I’ve never mounted an action in it before but it appears it may have been a demo chassis at the factory. (See pics) it appears that MPA may have mounted an action in there before.

Rem 700 and clones foot print.
Midnight Bronze Cerakote.
Right hand.

$800 shipped obo.

Interested buyers: I will not message you. YOU MUST MESSAGE ME TO PREVENT FRAUDSTERS.

Bandit pack, like new, only carried a few times. Great day pack, I’m ordering the exact same one on black for travel

$old

Present company excepted… because you guys are the exceptions to the rule otherwise you would not be here….

But massive early voting in Canuckistan… and everyone is lining up to vote for the liberal socialist commies who will “stand up to Trump” as if Canada (with an economy smaller than NY City and an army smaller than NYPD) can stand up to anything.

Instead of voting for a conservative who will restore their rights… secure THEIR borders, cut their taxes, exploit THEIR energy… and also work the the U.S. to create free trade on equal terms that will help bring a business Renaissance back to North America, instead of letting the ChiFascists have it all?

Orange Man Bad… so Canuckistanian brainwashed sheep will vote away their right s and freedoms, because some commie blohard snowbeaner is going to claim “I will stand up to Trump?”

An hahahahhahaha… 50 years progressive education and migration and CBC propaganda and leftist policies have take One of the great Western powers (that punched way above its weight for a country that, then, had just 20 million people or so) and turned it into a nation of bleating socialist sheep.


Baaaas baaaasa. Truckers bad. Orange man bad. Cuba good…. Baaaaa.

What a bunch of disarmed morons. They will vote themselves into third told status and think they are heroes for standing up to the one administration that can actual help Make Canada Relevant Again. (Never were “that” Great. But at least they can have back some delusions of global relevance and not get arrrested for posting memes… which is coming next, hosers.)

So go vote properly Took-sporting hockey beavers. Save yourself from decades more oppression. Because no one is coming to save you, either. We want your land and your minerals… but we got too many socialists already. No 51st state for you!!

Your future is in your hands!

[\rant]

Just got the new PH3 and I’m pumped—but I’ve always been a die-hard Spuhr fan. Because of how the rail is CNC’d, I can’t get one of the base screws to seat properly. Should I carefully file it down to make room for the second screw, or just run it with one? Would love to hear from the gear nerds on this one.

Congratulations to ZCO!

"ZCO scopes picked up 6% more shooters among this group to land at 20% overall. That was enough to edge out Leupold from the top spot that it held last year. Leupold represented 19% of the pros this year, compared to 22% last year.

Tangent Theta scopes went from 2nd to 3rd most popular but were once again just 2% behind Leupold. Nightforce had a similar showing year-over-year with a respectable 13%. Kahales picked up a few percentage points to land at 11% today, and Vortex dropped from 14% to 10% among this group of pros."

Zero Compromise Optic (ZCO) Scopes: 20% of Pros​

20% of the top 200 ranked shooters in the PRS said they were running a Zero Compromise scope when I surveyed them at the end of the 2024 PRS Season. That included 3 of the shooters who finished the 2024 PRS Season in the top 10 in the Open Division, which was as many as any other brand among the top 10. They also had a total of 12 among the top 50 competitors, which means they were well-represented at every level.