I have 1531 once fired pieces of Hornady 6 ARC brass. It is all tumbled, polished de-primed and ready for you to re size and load. I would prefer to sell it all at once verses bags of 100. Price is $400 shipped in a USPS flat rate box. Payment accepted of Venmo, PayPal or Apple Pay & you cover the fees.

*** Sold pending funds transfer ***

Selling a Sawtooth Arca rail for AI AW rifles. The rail is in excellent condition and comes with all hardware needed for installation. Comes as shown.

SOLD

No trades please.

Selling a (mostly) complete AI stock spacer kit with butt pad. Comes with all spacers and I believe all but 2 screws for the intermediate length spacers. An additional long screw is included and can be shortened accordingly as needed. Comes as shown.

SOLD

No trades please.

Selling a brand new Tikka T3 Tac A1. Still in the box, all the original parts and pieces, never even taken out of the plastic until today. I picked up two of these a couple years ago, my other one is a shooter, this one is just needs a good home.

Everything is in the box as it comes from the factory. Two 10rd mags, thread protector and factory muzzle brake, stock adjustment tools and shims. 24" barrel, 1:8 twist.

$2200 shipped

From the web:

• FAMILY: Tikka T3 Series
• MODEL: T3X TAC A1
• ACTION: Bolt Action
• CALIBER/GAUGE: 6.5 Creedmoor
• FINISH: Black Steel
• STOCK: Synthetic Stock
• BARREL: 24"
• CAPACITY: 10 + 1
• # OF MAGAZINES: 2
• THREAD PATTERN: 5/8x24
• SPECIAL FEATURE: Left Hand Threaded Barrel
• WEIGHT: 9.5 lbs
• SHIPPING WEIGHT: 14.3 lbs.
• ADDL INFO: Threaded BBL & Picatinny Rail
• ADDL INFO: Adj Double Stage Trigger
• ADDL INFO: Adjustable Cheek Piece
• MFG MODEL NO: JRTAC482L

Used but works as it should.

$sold shipped.

Defiance tenacity 6gt (1200 rounds on the barrel that’s installed) Randy Rachel barrel
Foundation MG2
Hawkins dm5 bottom metal
419 arca rail
For end full of lead weight can be removed with little heat.
Trigger tech diamond
Apa fatbastard 3/4-20

The bolt has all brand new internals (firing pin spring ejector, and extractor)

Extras

300ish 1x fired Hornady brass

If it is a FTF sell i will include all the barrels that have roughly 2K rounds on them for practice but this doesn't make sense if i ship them unless the person buying wants to pay for shipping these barrels.

Located in the MEM area and will travel to for a FTF sell. Will split shipping to an FFL

2500 OBO

I haven't posted here in a long time. In 2011, I bought a Sako TRG-22 in .308. I've been thoroughly impressed with its accuracy and quality, but I'm looking to upgrade for quick change barrels, caliber swaps, and 6.5mm ballistics. I'm just getting back into shooting after going through a divorce of few years ago and I have always wanted an AI rifle.

I went to EuroOptic in person last week and put a deposit on the rifle linked below. I like the old-school AI AT look and they had this unfired display model that was just over $4100. I'm amped up to get it, I need to sell my TRG unfortunately, but that's what I've decided to do. I'll buy a .308 barrel for the AT down the road to burn up the supply of 308 ammo and components I have on hand.

https://www.eurooptic.com/Accuracy-...neItemId=6ac16aac-0d8f-49ac-a180-943438d136cb

All of the above said, is there any good reason to get an AI AT-X instead? They were at least $1,000 more and only had the fixed stock version; the AT I put a deposit on is a folder. I'm not second guessing myself, I just never bothered to research the AT-X. Thanks for any advice or input!

21st Century Priming tool with #2 and #4 shell holder. $150 shipped

Tried the G2 Erik Cortina EC tuner brake and it was not for me due to the concussion. Then moved to the ACE brake and I still have a eye flinch when shooting due to the concussion. With a suppressor or bare muzzle I don’t have this issue.

Any less concussive brakes?

Spuhr 4001. 34mm 1.18”. Good shape. Box inc. sold

DTA 34mm scope mount. 1.5”. 20 moa. Built in bubble level. Cerakoted fde. Replaced DTA screws with Badger Ordnance torx screws. $200

Vortex pst gen 2. 1-6. VMR-1 mrad illuminated reticle. Only used twice at a bench range. Throw lever, box and paperwork inc. $375

Only trades im looking for is an eotech exps 3-0

PP ff or Venmo. PM with any questions. Thanks

ARC 34mm rings. Low height, I believe 0.94”. $120 shipped.

I have 2 barrels I am not going to shoot any more after getting a true comp contour barrel. I was thinking about re chambering them into something else but I'm just going to let them go.

1st barrel is a Preferred Barrel at 22' long. It has less than 500 rounds down it & probably less than 400. 5/8 x 24 threaded and cut for Zermatt Origin. Price is $350 Shipped. *** Sold ***

2nd barrel is a Douglass blank at 18” cut for Origin action with WTO switch lug and 5/8x 24 threaded. It was cut by desert precision Gunworks. It’s been a shooter since day one. It has mostly shot hornady 108s and 58s. I'm guessing close to 2000 rounds on it.
$200 shipped" ( It shot almost all the Hornady brass I have for sale on another post.
***** I do have a Spare PPC Bolt head that can be added to this barrel for $100 if needed. It will NOT be sold separately. *****

*** Not sure what is going on w/ SH and the pictures being removed. I can send them to you. ***

Hey guys, l got a buddy who's into LR stuff and is always bugging me to go shoot with him. I've had plenty of shooting exp but never stretched it out before. I have a couple of very basic questions.

When you're running a big decked out scope that you can hold off or dial, does the caliber really matter that much? Is drop basically irrelevant and BC the basic consideration?

I have a Ruger Mark ll M77 in 7 mag and a Rem 700 30-06 that I'm not doing anything else with. I could also buy a 6.5 Creedmoor. Will either of the three calibers really be drastically different with the right scope setup?

Up for Sale are Two Tall Outdoorsman Bino Adapters and 1 Large Stud.

Tall Adapters $65 Shipped.
Large Stud $20 shipped.

Buy and adapter with the stud and I'll ship both for $75. Take the entire lot for $140

Jimmy

For sale is an excellent condition Ruger made marlin 1894 SBL in 44mag.

Roughly 50 rounds down the tube. Shoots great.
Comes with Factory box, papers, stock, handguard
**No internal or functional parts were changed-- just the foregrip and stock

Comes with:
Ranger Point Precision M-LOK End Cap Pistol Grip Stock Set (pistol grip stock with handguard)(Black) (MSRP: $495)
Ranger Point Precision M-LOK 44 Mag Cartridge Quiver Six Rounds (installed on handguard) (MSRP: $59)
Ranger Point Precision M-LOK 44 Mag Cartridge Quiver Six Rounds (installed on stock) (MSRP: $59)

$550 of extras

Asking for $1300 shipped from me (INDIVIDUAL) to your FFL. IF your FFL requires from FFL then add $50

nevermind

Sphur 34mm 1.18 scope mount

Has dope card

Raptar Mount and side rail

Bubble level

$450 shipped obo

Curious what guys are using for shooting gloves in the winter. Shooting a steel plate match in December. Match is in PA and im expecting sub 30 degree temps.
(Also, wasnt sure if this was best in the competition shooting group, or the armory)

For Sale: Brand new in box! Custom assembled KRG Whiskey 3 chassis for REM 700 SA pattern rifles. Chassis has a 18” Vision forend installed (4” longer than KRG stock one) which has 13” of usable ARCA rail and a built in barricade stop. Vision forend and original KRG small grip are Cerakoted stealth gray to match. Also has a new KRG Heavy Angled Bag Rider installed. Original KRG gray forend and large gray grip are included in the original box w/instructions. $SOLD

Not looking for any trades.

I started with a Winchester M70, then moved to an H-S Precision take-down. Now I am looking to build a custom rifle (or purchase a high end factory rifle). Along the way I fell in love with the 3-position safety. Does anyone offer a custom action with a 3 - position safety? Should I avoid it because it limits my ability to customize stocks or other parts of the rifle? Help me understand the trade-offs.

The goal is to have an accurate and lightweight hunting rifle. I am leaning toward 300wm or PRC, suppressor, proof barrel. I am open to other options.

Hello, I just got my new Labradar LX and the main reason I bought this device was that its new soft update could calculate BC (G1 and G7).

On last weekend I had a chance to test it on the field. I shot 53 rounds on short and long ranges. It seems to capture each shot quire well and the info was displayed in the screen. On the screen I can see BC average of total shots

However, when I got home and exported data from the device the files contain bullet speed and kinetic energy data and again average BC. What I really miss here is individual shot's BC- as some shots might be not well recorded, also it is math work to eliminate extreme dots and get natural most expected average.

So, if you have any experience with this device any advice is welcome how can I get the BC data (for individual shots).

thanks and Merry Christmas !

Why do I remember and then instantly forget to buy her gift till the last minute?
Did you guys get it already? What kind of stuff did you get her? Let's get some ideas rolling...

WTS: Stuteville 6BRA 28" Bartlein Barrel for Impact SA, has 90 documented rounds thru it, I'll clean and borescope tomorrow and post pictures.

Barrel Specs:
-7.5 twist Bartlein Blank
-28" M24 Contour
-Muzzle Threaded 5/8-24 3A (comes with a plastic protector)
-Threaded and Chambered by Stuteville Precision using CNC Equipment
-.274 Neck Dia. and .135 Freebore
-Ready to Install On Impact Action

Price on this barrel is 525 shipped to your door, save yourself 275 bucks and buy this one instead of ordering a brand new one from Stuteville. Acceptable payment methods are discreet PPFF, Venmo and CashApp. Price includes shipping but NO insurance, if insurance is wanted then 15 bucks must be added to the price.

ACCEPTABLE TRADES:
-Impact 737 RH SA (Partial trade, Barrel + Cash)

If you have one that you will not be using, shoot me a PM.
Thanks and Merry Christmas to you and yours!

Accuracy International Muzzle Brake M18x1.5 , .30/.338​

I have 2 of these and am selling due to going with a different setup (suppressed).
Both have some carbon but would clean up just fine.
Will update pics as most I took are too large to upload.

$110 shipped each. 2 available.
Located in Clarksville TN