(1) Available.
(1) SOLD PENDING FUNDS.

$520 shipped.

PPFF, Zelle, USPS MO

Used like new scope, mounted in Spuhr, used at 3-4 Rimfire matches.

C634 Nightforce NX8 4-32x50 F1 Black

Spuhr SP-3601: 30mm Picatinny Mount 20 MOA - 1.181" (also comes with Spuhr mountable level and extra screws)

Asking
Scope and Spuhr - $1,900

Scope Only - $1,600

Hey all,

New member joining from western MN. There are no competitions in my area but we have private land to shoot out to 1k yards. Pertinent interests here are reloading, long range shooting, building rifles/light gunsmithing, archery, hunting (whitetail, small game, coyotes day and night with thermal), and all manners of outdoors pursuits/camping/fieldcraft.

I've visited the site plenty of times and always found it to be informative. Glad to be here and, as always, keep learning.

What's a good neck/shoulder bushing and expander mandrel size combo for the SAC modular sizing die for 6.5cm? Im thinking 286 for the bushing and 262 for the mandrel? I got the 283 (which is technically for 25cm) and 261 for the expander mandrel. I watched and followed Gregs (from primal rights) video on how to determine what bushing and expander mandrel sizes to get and now when sizing my brass the shoulder will bump the 2 thou i want but is only sizing the top 2/3rds of the neck so now I've got to find another combo that works correctly. I set up the die using their YouTube instructional video and i also asked sac if this combo was ok for 6.5cm before getting them and they said yes but obviously it's not working out so well. so now I need some help to find a combo that sizes my cases correctly and effectively. My brass has 13.5 neck wall thickness, which is why I chose 283 to get me about 5 thou squeeze to then open back up with 261 (a little over 3 thou after spring back)
Thanks

RCBS chargemaster 1500. Upgraded to a different one so don't need this. Works perfectly can send videos if needed. Just took a quick pick but can send more. I may even have the original box around somewhere.

$200 plus shipping.

Please explain to me how in he!! Biden can keep cancelling student loans after the Supreme court clearly said it is illegal?
How is this not a crime?
Inquiring minds want to know.

Eberlestock Large green bino harness. Ordered the wrong size and never returned it. Been sitting, never used. $65 PayPal f/f

Lapua Full Metal Jacket FMJ 55 Grain .223 Remington 400 Rounds $550 shipped

Looking for a Terminus Zeus QC 308 bolt face action, maybe with a trigger. DM me with what you have.

Selling my excellent condition EPL-4 6-24 scope with all of the accessories possible. MIL Reticle

Scope Mount
Sunshade
Mag throw lever
Bubble level
Filp caps

18” Noveske DMR barrel with headspaced JP bolt, fail zero carrier, centurion upper, geissele mk16 15” rail, raptor SD CH, keymo flash hider, Geiselle OD lower, Geiselle SSA-E trigger, vltor A5 system, b5 SOPMOD stock, SOLGW parts kit, Leupold mk5hd 3.6-18 CCH reticle, Leupold mount, sling , Hornady dies and headspace gauge . I have a bunch of projectiles too mostly 60-100 gr
Less than 100 rds on build
Built by armorer at local gun shop
I can split up within reason.
Shipping FFL to FFL


scope. SOLD
$1,500 for rifle with mags
$1,000 upper with mags

Trade +/- cash
Sig M18X
flux legion
320 legion
Macro legion
Other high end 320 or 365 maybe Glock 43x

I've been handloading rifle cartridges for about thirty years, but never loaded for .280 Remington before and I recently acquired a .280 Remington custom rifle with these specs:

- 24", 1-9" .280 Rem McGowen barrel with a fairly tight chamber and a long throat
- action & magazine handle up to 3.6" COAL

So far I've tested H4350 up to book max loads with various bullet weights to get a sense of the velocities & pressures. Accuracy seems promising, but velocities are on the low side and pressures seem VERY low.

I've heard that RL26 should work well with the heavier projectiles in .280 Rem, but the only official data I've found is for Berger 150s (61.0 gr max @ 2997 fps).
I haven't used RL26 before, so I ran the numbers for 168 grainers with Gordon's Reloading Tool and asked my buddy to do the same with QuickLoad - results look like this:



All firsthand information about loading .280 Remington using projectiles weighing 150 to 180 grains would be highly welcome and if you happen to load .280 Rem with RL26, I'd be very interested to hear about your experiences.

Login to view embedded media You can hate a company all you want, but give credit where credit is due. This optic is going to kill off a lot of competitions if it comes out with the planned price range.

NV: $1000
Basic thermal: $1600
Pro thermal: $2300

Selling an FDE Surefire x300u-b. The light has normal signs of wear from general use. Works perfectly.

SOLD

No trades please.

For anyone looking at the 25GT, I started using one a couple months back. I got around 500 rounds on it now and a match under its belt (4th place finish at a regional 1 day prs match)

I haven't seen much in the way of load data so I figured I'd share what I've found so far. I keep this intentionally slow but it should give you an idea of where to start.

Barrel is a 28" Benchmark chambered by TS Customs with the alpha .180 reamer and installed by me on a Impact 737.

in the below image I am fire forming new 6mmGT Hornady brass and velocity tends to be about 15-20fps faster after the first firing.



Bullet being used in the above is a 135 Berger Hybrid jumping around .055", range notes 76 degrees, 67% 29.14 station pressure, little to no wind and time of day was 10 minutes before sunset through 20 minutes after... Limited on time, I had some pretty wicked mirage while shooting H4350 and RL-TS 15.5 coming off my shielded maverick and I know groups were affected but I was really more interested in velocities anyway... by the time I got to the loads with StaBall Match & 6.5 I had so little light left that I stopped for the night.

Garmin Xero used for velocity collection.

Top string is Varget
31.5: 2577, 2570, 2574 = 2574 SD 3.0/7.4 ES
32.0: 2599, 2602, 2596 = 2599 2.7/6.5
32.5: 2625, 2625, 2627 = 2626 1.1/2.4
33.0: 2657, 2649, 2654 = 2653 7.8/3.2

Middle string H4350, no compression was noted when seating these.
34.5: 2604, 2595, 2590 = 2596 5.6/13.3
35.0: 2639, 2642, 2642 = 2641 1.2/2.8
35.5: 2662, 2664, 2664 = 2663 1.1/2.6
36.0: 2698, 2685, 2696 = 2693 5.7/13.3

Bottom String Reloder TS-15.5
31.5: 2555, 2544, 2543 = 2548 5.3/11.6
32.0: 2572, 2580, 2578 = 2577 3.6/8.6
32.5: 2599, 2606, 2603 = 2603 2.7/6.6
33.0: 2621, 2621, 2629 = 2624 3.8/8.5

Different day with 135 Bergers Hybrids.
Vihtavuori N150 31.75gr 16 shots = 2632 SD 6.2/24 ES
32.75gr 4 shots = 2692 5.7/14.3

With 134 Hornady ELD seating same jump... .055ish
Vihtavuori N150 31.75gr 17 shots = 2610 SD 8.9/38.9 ES

Just letting ya'll know that we are in the middle of some great savings for getting a custom rifle up and running. Discounts on thread and chambering, pre-fit barrels and Cerakoting. Right now we're having a special deal on a truck gun build kit, next week you can get $150 off an Impact barreled action with a 75 degree bolt throw. Come to our Website and check out ways to save my friends.

Have any of you guys put a 50 mm scope on a Ruger American Gen 2 with tally rings? (Eliminating the picatinny rail) Do I need mediums for that?

Hey guys, been a lurker since around 16-17. Usually to create classes or grab metrics from the guys who been there done that. Been shooting LR for the government for 10 years or so now. Happy to be here.

+- 820 of these same lot #1907
These shot extremely well in my 223AI that I no longer have.
$265 shipped

I have a 22creed barreled action consisting of an impact action, bartlein fluted 22” barrel, and a trigger tech trigger
Has had 20 rounds down the tube.
1850 plus shipping

Hello all, I'm looking forward to learning a lot, spending late nights searching the classifieds, hot takes, and more.

Looking at building my own tac table out of aluminum. Planning to use a game changer or a home rolled bag. Suggestions on dimensions? Bag attachment suggestions?

I will get out of 6 BRA if this sells.

Howa 1500, firing pin reduced and bushed for small rifle primers, trigger timed and lightened with 20 moa rail.
Whidden dies,
950+ 105s,
MDT 12 round mag,
about 190 Petersen 1 and 2x fired brass.

Round count on barrels less than 300 each to break in and compare. Both shoot fantastic, like every other 6 bra. I don’t have targets any more.

Two 26” barrels both chambered 6 BRA, threaded and will take 5/8 x 24, light palma contours, one Proof another Xcaliber. Chambered by same smith, Bring the Edge out of NM.

Barreled action and extras, $1,450 obo

New Stocky’s VG II and used AICS bottom metal for additional $650 OBO.

3x Mean arms 30rd endo mag conversion kits (replace magpul pmag 5.56 innards) (new)

AR15 9mm blowback bolt

5” barrel 1/2x36 threaded

Blast can

Rugged 3 lug adapter 1/2x36 (new)

Buffer, buffer tube spacer

1x spare Wilson combat 9mm firing pin/firing pin spring (new)

All for $110 shipped.

Hello!

I'm fairly new to reloading as I am just starting with PRS over this past summer.


I've noticed a few times that I have trouble chambering brass that I reload, and have narrowed this issue down to brass that was once fired from a different rifle.

A coworker recently gave me a bunch of SRP brass that has these strange lines on the shoulder - He fired them out of his mossberg patriot. I tried sizing one and chambering it in my rifle (savage axis precision) and it will not chamber. In fact, it locks the bolt up pretty bad, resulting in the need to smack it open with a mallet.

The brass hangs up on the midsection i believe, as is evident from the scratches on the case.


IF this sounds like a logical explanation, are there any sets of dies I can buy that will resolve this issue and squish the sides closer to the base back to factory? I am currently using Hornady Custome Grade dies on a lyman american 8 press.

Thanks!