I have a brand new pair of Walsh Custom Defense mag holsters. These were custom made to fit MDT's XM mag. They have Tek-Lok clips installed.

I ended up going a different route with the build and will no longer need these.

They are OD Green carbon fiber

$50 for 1
$90 for both.

Prices are shipped.

No trades at this time please. Thank you.

I have 2 pairs of Walsh Custom Defense short action mag holsters.

They have mounting holes drilled for Tek Lok clips as well as standard belt clips. They will come with both.

2 are black carbon fiber
2 are blue carbon fiber

$50 for 1
$90 for 2
$175 for 4

All prices are shipped.

No trades at this time please. Thank you.

Have a used but in great shape set of Vortex rings. They are 30mm tube and .87 in high. $115 shipped

Used but in great condition. Comes with all the inserts, wrench and 128 Gb card. Just don't use it much anymore.
$475 shipped.

$79.99 for 1000 ct

Thanks for looking. Please post “I’ll take it” with the item you want following that up WITH AN EMAIL to my hotmail.com email address (I have the same username as I do here). PLEASE DO NOT PM. I DO NOT CHECK PM's SEND A EMAIL

Please feel free to email me instead of posting here with any questions, I will respond via email only



3A.[#2433] Virgin Knights Armament KAC SR-15 E3 Upper Receiver, Stripped. These are part of small handful of KAC stripped Upper Receivers that were recently released. These uppers have not been assembled on complete rifles or even complete upper receiver assemblies, so they are therefore referred to as “virgin”. They are engraved with the KAC shield on the upper tang under where the rear sight will mount. $325 shipped SPF





4A.[#2912] RARE Knights Armament KAC Modular Floating RAS II P/N: 21102. Labeled "RAZ II". Similar to the equally rare and hard to find KAC Modular Floating RAS P/N: 20071, but it has a removable top rail section for mounting an Insight AN/PEQ-2A. This is one of the rarest KAC rail systems and few people even know it exists. This rail was NEVER commercially produced or ever made available to the public. This is a once in a lifetime opportunity that will not present itself again. This rail is Vero Beach marked. New, includes 3 x KAC 11 Rib Rail Panel Covers. Does not include the rear clamp and bolt (similar to the bolt and clamp on any KAC Rear Sight or RAS II). I’m interested in trade possibilities (+/- cash) for other rare Knights Armament rifles and rare accessories. $850 shipped






4D.[#2690] Knights Armament KAC FF RAS SR-15/16 Medium Length P/N: 99166/20214. Factory new, includes 3 x KAC 11 Rib Rail Covers. This is the highly coveted and long-awaited current limited production of the now legendary KAC Medium Free Float RAS. Only a very small batch was produced, and no more will be manufactured, that window has closed. Perfect for your mini-recce or custom build. The value of these rails soared to as much as $750+ in the past, don’t miss your chance this one last go-around to pick one up, this may be your last chance. $350 shipped each (a couple available)




4E.[#2992] Knights Armament KAC FF RAS SR-15/16 Carbine Length P/N: 20011. Factory new, includes 3 x KAC 11 Rib Rail Covers. Until now these were extremely hard to find, and were in high demand for building an original early JSOC rifle. This is the highly coveted and long-awaited current limited production of the now legendary KAC Carbine Free Float RAS. Only a very small batch was produced, and no more will be manufactured, that window has closed. Perfect for your JSOC or custom build. The value of these rails soared to as much as $750+ in the past, don’t miss your chance this one last go-around to pick one up, this may be your last chance. Includes 3 x KAC 11 Rib Rail Covers. $350 shipped each (a few available)



4G.[#2247] Knights Armament KAC HK 93 H&K Medium RAS P/N: 98067. Factory new KAC HK 93 H&K Medium RAS P/N: 98067, includes 3 x KAC 11 Rib Rail Covers. This is the highly coveted and long-awaited current limited production of the now legendary KAC HK 93 RAS. Only a very small batch was produced, and no more will be manufactured, that window has closed. Perfect for your HK, PTR, etc. or HK clone. The value of these rails soared to as much as $1000+ in the past, don’t miss your chance this one last go-around to pick one up, this may be your last chance. $500 shipped each (a couple available)




4H.[#2159] Knights Armament KAC HK MP5 HK94 HK53 RAS P/N: 97198. Factory NEW KAC HK MP5 RAS, includes 3 x KAC 11 Rib Rail Covers. This is the highly coveted KAC HK MP5 RAS. These rails have become even more popular and hard to obtain with the recent release of the German made HK SP5, there is nothing sexier than seeing end results of the combination of these two high end manufacturers on the HK MP5. This rail is perfect for your HK, MKE, ZENITH, Omega, PTR, TSC Machine, TMP Outfitters, RDTS, POF, Vector, Turner, or other MP5 clone. The value of these rails soared to as much as $1000+ in the past, don’t miss your chance this one last go-around to pick one up, this may be your last chance, especially factory NEW. $400 shipped each (a couple available)



7.[#2895] Knights Armament KAC 2 Stage Match Adjustable Trigger P/N: 98032. New. This is the factory adjustable type issued on the most well-known weapon systems. Perfect for an accurate Mk12 Mod 0/1/Holland, MK11 Mod 0/1, M110, M4A1 SOPMOD Block I/II, CQBR Block II, MK18 Mod 0, SDM-R, SAM-R, Recce clone, or SR15, SR25. $200 shipped each (multiple available)





10C.[#2774] Knights Armament KAC URX4 Keymod Flat Panel Kit with Keymod Handstop. Only installed and removed. Custom stippled, extremely labor intensive and professionally done. $65 shipped for the entire set




11.[#2981] Knights Armament KAC URX4 KeyMod 5 Slot Rail Section P/N:30714. Lightly used. $20 shipped each (3 available)


16D.[#2996] Knights Armament KAC URX 3.0 & 3.1 Handstop, 1 Hole, P/N: 30411-BLK, Black. Only installed and removed. These are $35 new, save some money. $25 shipped each


16E.[#2138] Knights Armament KAC URX 3.0 & 3.1 Handstop, 1 Hole, P/N: 30411-TAU. Unused, only installed and removed. $15 shipped each (a couple available)


16F[#2681] Knights Armament KAC URX4 KeyMod Handstop, Taupe P/N: 30795-TAU. Unused, only mounted. $20 shipped each (3 available)


16G.[#2684] Knights Armament KAC URX4 KeyMod Handstop, Black P/N: 30795. Unused, only mounted. $20 shipped each (3 available)


18.[#2867] Knights Armament KAC Bipod Sling Swivel Stud & Nut Assembly P/N: 20288. Lightly used, this is the type that screws into the bottom of your KAC RAS or URX to attach a bipod. $15 shipped each (a few available)






Trades I’m looking for (I can go +/- on my end): I’m always interested in almost anything by Knight's (except Vertical Grips, Rail Panels, RAS) so please let me know what you have especially if it's Knight's.

Looking for the following:

KAC 5.56mm Triple Tap Break TTP P/N: 25683
KAC FSGB Locking Front Folding Sight Gas Block P/N: 21342
KAC 30mm Scope Ring Standard (Medium) Set P/N: 98033, used, painted, and/or ugly works fine for me
KAC Teardrop Winter Trigger Guard P/N: 22512
KAC Ambidextrous Safety Selector - SEMI P/N: 25776 (with the scalloped Safety Section)
KAC HH Buffer (black one with KAC Logo)
KAC Special Run (XMAS Cheer) Upper/Lower Receiver
KAC Special Run (XMAS Cheer) 11.5" SR-15 E3 Dimpled Barrel
KAC Special Run (XMAS Cheer) Light Weight URX II
KAC SR-15 E3 IWS Lower Receiver P/N: 25780 or SR-15 M4/M5 Vero Beach Post Ban Lower
KAC SR-15 Stripped Flat Top Upper Receiver
KAC SR-15 Upper Receivers of all flavors (Mod 0 Legacy, LPR, CQB, Carbine, Mod 1, Mod 2, Etc)
KAC SR-16 E3 CQB 11.5in Upper P/N: 32480

KAC SR-25 URX II Carbine Length 10in P/N: 23107 (has no front sight)
KAC Remington 870 RAS P/N 99143
KAC Remington 870 Top Rail P/N 25129 12.25"
KAC HK G36, and HK G36K RAS
KAC FF RAS SR-15/16 Carbine Length P/N: 20011 (Vero Beach marked)
KAC FF RAS SR-15/16 Medium Length P/N: 99166 (Vero Beach marked)
KAC URX II Carbine Length M4 P/N: 25124
KAC URX III Rifle Length P/N 30005 12.5in
KAC URX II Rifle Length P/N 23258 (Has NO Integral Front Sight) or the P/N 20547 version
KAC FF RAS MRE B (Modular Receiver Extension) P/N: 21166 (Vero Beach marked)
KAC SR-25 FF RAS or URX's (Rifle or Carbine Length)
KAC SR-16 E3 CQB 11.5in Upper P/N: 32480
KAC SR-15 E3 SBR 11.5in FSGB Block I Upper P/N: 30356
SureFire FH762K Flash Hider 7.62mm 3/4"-24 SR-25

KAC SR-15 M4
KAC SR-15 M5
KAC SR-15 Match
KAC SR-25K
KAC SR-25 Battle Rifle
KAC SR-25 Mk11 Carbine
KAC SR-25 Stoner Carbine

PLEASE DO NOT PM, EMAIL ONLY

I’m looking at a number of scope options to put on either a 6.5 LMT MWS 20” auto loader or a 308 Tikka Tact 1 24”.

I currently have an NXS 3.5-15x50 that I moved from the LMT to the Tikka and I’ve been thinking about something with more magnification for the LMT.

Two of the scopes I’m considering are Nightforce. One is a pretty pristine NXS 5.5-22x56 and another is the same but with 50mm objective. Or, I have an option to get a very well used (but not abused) ATACR 5-25x56.

Is there a significant advantage of the ATACR over the NXS? It would cost about $100 more plus the cost of mount/rings with the added wear and tear.

Worth it?

#1 Nightforce NX8 4-32 x 50 MOAR CF2D Reticle, 2nd Focal Plane, 30mm tube, MPN C641. Probably less than 100 rounds on scope. C/W Tenebrex covers, box, throw lever and whatever else they come with new. Not a mark on it that I can see. Its still mounted so its possible there may be faint ring marks once removed. Rings not included. SOLD

#2 Meopta Optika 6 4.5-27 X 50, First Focal RD Reticle, MRAD, 30mm tube, MPN 653595. Great reticle for an all purpose scope. Very visible at low power unlike most FFP optics. Has illumination but not really necessary with this reticle. Nice locking elevation turret with zero stop. Optika 6 are great value and nice glass, not sure you can do better for the $$ This scope may have been mounted but I don't think it was ever used it. $675 shipped

December 7th a date which will live in infamy

For those who served and came home



and those who served and live on forever only in our hearts.



We thank you.

Probably a stupid question and I am good at that.

When Hornady came out with the 7 mm PRC, they pointed out that if you already had a 7 mm Rem Mag or .300 Win Mag, you could swap barrels and even use the same bolt face.

LIke any rifle where you might replace a barrel or trigger assembly, you don't need a 4473 federal transfer. Because those are replacable and not serialized. The receiver is holds the serial number.

So, if you put a 7 PRC barrel on a .300 WM receiver, is it still legally a .300 WM, which is what it was when you bought it and transferred with a Form 4473?

Do you run afoul if you don't file a change of caliber associated with that receiver?

Does it matter? The SOCOM MRAD, which you can buy, has .308 Win, .300 Norma Mag, and .338 Norma Mag barrels and parts. Only one receiver presumably having the serial number.

I try to foresee ways the commies could come at us and worry about crap like this.

SOLD

I have a Q Honey Badger in 300 BO (16" barrel) that is rejecting almost everything I've tried to feed it in a heavier, sub-sonic hunting bullet. Getting jams and in some cases, problems getting the charge handle to move after first round is fired.

The only two bullets that the folks at Q have suggested I try are the Maker and LeHigh sub-sonic hunting bullets.

Before I sink a bunch of $$$ on these two brands, can anyone tell me what luck they may have had in their Honey Badgers?

Bear in mind, a Honey Badger is not a standard AR15 action so what works in an AR, may or may not work well in the Honey Badger. (Don't ask my why).

Thanks in advance for any insight .

Foundation Exodus cut for Remington 700 SA clones. Been running an Impact 737 SA in it. Dark Distressed finish and lead weight kit. Cut for Badger M5 bottom metal (not included). $745 shipped CONUS. Venmo, Paypal F&F or add 3%.

Just got a JP LRI-20 in 6.5 Creedmoor. I’m used to reloading pressure signs for my bolt guns, but it’s the first gas gun I’m going to reload for. I Put about 200 rounds of factory Hornady ELDM 140gr through it and most of them came out with ejector marks.

1) I wouldn’t run my bolt guns with this load if I saw this. Would you say this means it’s over pressure and should I stop if I see this when I start to reload…or are gas guns harder on brass than bolt guns?

2) can I use the cases with the deflector marks and damage on the neck? They pretty much all have it and look like this. I have another 300 rounds I was hoping to use the brass on once fired.

Time to clear out some inventory for the new year. Most products at 20% off. Use DECEMBER20 for the code at checkout. Good until Jan 1st, 2025.

For those of you kicking off the 2025 Precision Rifle Series Pro season in Arizona this coming weekend, we will be there as a sponsor. We will have some goodies at the prize table as well. If you are going and would like me to bring you your order, drop it in no later than Thursday this week and use the notes field to indicate as such.

Thanks and see you there.

https://mcleodprecision.com/

Kevin

P.S. Stay tuned for some new product drops coming in Q1 2025. Doing some design work over the Christmas break. Add us to your watch list for those announcements.

Has anyone out there played around much with the 'classic' 308 Norma Mag in a long barrel? (or 30-338 Mag)

Wondering about what speeds you're able to run up to with 225's or 230's & modern powders

Like New Geissele scope mount in desert dirt color (DDC). 30 mm tube.

Looking for 225 shipped.

Paypal FF preferred.

Selling a Geissele ssa-e trigger. Asking $130 shipped. Venmo only please

Hi,

Fresh build of an AR-10 in 6.5 CM.

Stag-10 upper and lower receiver set
BA 24" Stainless barrel
Tool Craft High Pressure dual ejector bolt

I've put 90 rounds through it, and it has ran and shot great it is pretty accurate as well.

When manually manipulating the bolt, it is difficult to extract a round out of the chamber by hand. It can be done, but its definitely not smooth or 'easy'.

I have tried both a factory round, as well as a reloaded 'dummy' round that was fired in the rifle, then the shoulder bumped .005". They both behave the same way upon extraction.

The weapon functions as expected with no issues when being fired this is only an issue when manually operating it.

Any ideas? Is this normal? Maybe because of the double ejectors or something?

Received a message from @LR l0ngyards
After posting in a for sale ad. Trying to get me to send him 3400 dollars.....

@MarinePMI

Thanks

Doc

As noted looking for the Black (EuroOptic) version of the Rezor Gen 3 6-36 in MRAD. They should be back in stock in a bit but was seeing if anyone had one that was not in current rotation and in good condition (original box and stuff preferred but not a deal breaker) . Must be able to prove you have the scope, I am not an idiot, so no scammers please. I have read the warnings but still hopeful...lol. So far the 10+ things I have bought here went perfect and hoping not to break my streak.

Selling my tripod setup. Leofoto SA-324CL tripod with the Really Right Stuff Anvil 30 head.
$680 shipped

so i have a very nice vintage ES340b Mauser trainer that predates WW2 , i have a correct small arms Oigee scope for it ,but they did not have windage on their scopes back then , only option i could find were Millet 1 inch windage adjustable rings with 7/8 inserts , i havnt really done anything with it for several months because im not entirely certain how the rings adjust windage and they do not have instructions in the sealed blister pack , look very well made

im guessing you loosen one side of the claw and take the slack with the opposite side , i am also guessing that you must do front and back at the same time in the opposite direction as to not kink or pressure the tube , does this sound correct ? im just wanting to get my ducks in a row rather then cause a issue in haste , its a scarce rifle and vintage glass ,so i thought i would ask those that deal with scopes more than me

picture shows with a old weaver tipoff which was all i had on hand in 7/8 until i found windage mounts