AMP cert for $400 off an MKII or a bullet seater. Good till the first of November.

$150 to me.

Excellent scopes and the customer service is without peer.

LWRC SIX8-6.8MM SPC II
Desert Sand Color
16 inch barrel
Timney skeletonized trigger
SilencerCo ASR Muzzle Brake
LWRC rail covers
$2200 buys it minus scope and mount.

SCOPE SOLD

Sig Cross PRS 6.5 Creedmoor, 24” barrel with 1/8 twist, Sniper Gray Cerakote.
SCOPE NOT FOR SALE
$2150 buys it bare

Excellent condition, the worst "marks" on the scope is really just the different shade of color from where the Nightforce sticker used to be (on the front section at the top, though since the scope has been mounted, there may be signs of that as well. If you're one of those people (like me) who likes to dial your LPVO, this tracks at a perfect 1:1. It was in a Spuhr Mount (also will be listed).

Just a note on this being MOA: All of my other optics are in Mils. Between the two NX8 1-8 Models, the MOA version allowed more precise adjustments compared other the MILs, so that's the one I chose. IMHO, we should all be able to think in Mils and MOA

$1450 $1375 $1300 Shipped Conus.

Very lightly used. Was used with a Nightforce NX8 1-8, which I also have listed.

$325 Shipped CONUS.

300BO pistol

F1 Upper

F1 Lower

F1 BCG in rose gold

SLR 4.25” handguard

5” Ballistic Advantage 300BO barrel with 1/5 twist

SLR Adjustable gas block

Silencer CO ASR Muzzle Brake

GEISSELE SD Straight shoe trigger

LAW Tactical folder

SBA3 brace

Shot for about 200 rounds

$2600 buys it

These come standard on the Zastava M90s and I really like the stock. I purchased an M77 and HATED it, so the stock was used just once before I got rid of the rifle. Comes with the bolt (and box). $60 Shipped CONUS.

Sharps Bros Hellbreaker (P-51B Mustang ‘Old Crow’ Cerakote) AR15 matched Upper/Lower Receiver + 15” Rail

Magpul Pistol Grip

B5 Silicone rail inserts

New WMD Nix-b BCG

Strike Industries CH

Odin Works Stock

XTS/CMMG LPK.

Ballistic Advantage 16” .223 barrel

Swamp Fox 1-8 scope sitting in a Nocpix QD mount

$2000 buys it

308 AR Build

Aero Precision upper

Aero Precision lower

Wilson Combat rail

Brand New 20” Proof Carbon Fiber Barrel with 1/10 Twist and KeyMo Muzzle Brake

JP BCG

JP Bolt

Rise Trigger

Radian Ambi charging handle

Magpul Grip

Magpul PRS Lite Stock

$2500 buys it

I purchased this new. I only ever used the torque wrench and maybe the bore guide. It is complete (see the final stock photo from MGW). When it went to the range, it went inside of a hard polymer travel case (Similar to a Pelican) and was always stored inside my (smoke free, no-children) home in an HVAC-controlled area (not inside a garage or anything like that).

All photos except the last one are of actual item(s).

$280 $250 shipped CONUS.

SLR, 14.5 Proof Carbon fiber build!!

SLR Upper

SLR Lower

SLR Rail made for Suppressors

“If you can’t or don’t plan on running suppressed I have an SLR rail that I can switch out”

14.5” Proof Carbon Fiber Barrel

Superlative Arms Adjust Gas block

Geissele Flat Trigger

Maxim Defense Brace

Radian Ambi CH

CMMG BCG

$3000 buys it located in Laquey, MO
Suppressor not included!!!!

6.5 Creedmoor AR build

Aero Precision upper

Aero Precision lower

Aero Precision rail

Brand New 20” Proof 6.5 Creedmoor Carbon Fiber Barrel with 1/8 Twist and JP 3 Port Muzzle Brake

JP BCG

JP Bolt

Geissele Flat Trigger

Geissele Ambi charging handle

Superlative Arms Adjustable gas block

Luth AR Precision Pistol Grip

Magpul Precision Stock

$2500 buys it

We’re starting a Precision Rifle & Gas Gun Series in Butte, MT. October 4 and 18 are the first matches.

https://practiscore.com/clubs/butte_gun_club_precision_rifle_and_gas_gun_series

LaRue Mount for Trijicon MRO/MRO Patrol - I went to 2.25" a long time ago, and this has been sitting in my drawer.

$75.00 Shipped CONUS.

Ruger M77 243 Manufactured in 1974 with the original tang safety. It is in great condition for the year and comes with Leupold 30MM rings and bases. $1275 buys it located in Laquey, MO

SCOPE IS SOLD

Radian .223/5.56

Radian upper with a Ballistics Advantage 14.5” Barrel, SLR Adjustable gas block, SLR Brake that has been pin welded. Radian Lower with Timney Drop in Trigger, B5 Stock, B5 Pistol grip topped with a Leupold Mark AR 3-9 Illuminated TMR reticle scope with Alumina Caps mounted in a YHM mount

$2600 buys it

I have some Sako TRG 22 barrels available.


I have three Bartlein 6.5CM M24-profile and one 6GT TRG22 Barrels. All new, except the 6GT has (literally) 12 rounds. They were done by Southern Precision Rifles (AKA Bugholes). They use the Bugnut system. I only have two bug nuts and two wrenches, so the way I'm going to structure this (pending demands from potential buyers) is that someone either takes all of the 6.5CM barrels or one 6.5 and the 6GT barrel. Price Per Barrel (with a Barrel Nut and wrench) will be $700.00 for the 6.5CMs and $650 for the 6GT.

Barrels are 1/8" twist, 26", M24 profile and 5R rifling.



[Will update with pictures].

Up for Sale is an Unfired Desert Tech SRS M2 with factory 26" 300WM conversion kit.
1 Magazine included
$4,800

Also available with the rifle:

Steiner T6Xi 5-30 MSR2 Reticle (new)
American Rifle company M-Brace 0 MOA mount with level (new) $2,100 for scope and mount
Atlas PSR bipod with Area 419 ArcaLoc mount. $300

Reasonable offers entertained for both rifle and optics

More photos available upon request

Up for sale is an unfired Surgeon Scalpel chambered in 300 PRC.
Cadex Dual Strike Chassis
Cadex Arca Rail
Cadex Falcon Bipod with Arca mount and Leg extensions
Area 419 Match muzzle brake
Comes with both left and right hand cheek pieces
Both standard and vertical Cadex grips
Ships in hard case
$5,250

Also available with the rifle

Vortex Razor Gen 3 MRAD (Black)
American Rifle Company M-Brace Mount
Both $2,400

Reasonable offers entertained for both rifle and optics

More photos available upon request

Gonna post this here because the bolt gun forum gets the most views. Dear Forum Moderator, If you need to move this post to another forum that is more appropriate please do so.

I/We post on SH quite a bit. So I figured I should make a post about this.

Just want to be up front and honest with everyone here. We are telling customers the same thing on the phone.

Depending on what you are ordering and when you order it....lead times can be as long as 10-12 months right now.

Some guys (not necessarily anyone from the Hide) when we've told them this they have gone off on us on the phone about it. So we are taking a beating at times but I want everyone to understand that we are all in this boat together. Ammunition and bullet makers etc...are backed up, gun manufacturers are backed up, action makers, stock makers and scope manufacturers.

I won't name the ammo maker but we have had some ammo on order since May of 2020 and I cannot get a delivery date/time frame. We're not mad at them....it is what it is.

We've been helping out individual customers to manufacturers to ammo makers etc...when they/you have an emergency that won't change. We do what we can / when we can.

I know of other barrel makers lead times are out pretty far as well. So it's not just us.

I'm also asking and I will use this as an example...a guy wins a barrel gift certificate at a match. Calls in to redeem the certificate and order the barrel. He was told 10 months. He went off on my office guy about it and demanded the barrel should be done next month. So don't put anyone in front of the firing squad for this. Free or not....we are doing what we can to take care of everyone in a timely fashion.

I don't care what you are buying and from whom....barrels, scopes, ammo etc....guys please do your best to plan ahead and plan for the worst case scenario. If you burn up 4 barrels a year in matches and only have one brand new spare left....get it on order. Regardless of where you get it from. If your planning on building a new rifle right now and already have the stock and action and barrel on order and will need a scope for it.... don't wait...get the scope on order as well.

I don't for see things getting any better anytime soon for any of us. Like I said, "We're all in the same boat!"

Pretty much the whole shop here is working 55 to 60+ hours a week. This next pay period....just between 3 guys in the shop they have a 153 hours of overtime alone! That's in a two week period and that isn't a typo!

I've also been asked and will put it out here as well..."Are we o.k. on steel?" The answer is yes! No steel shortages. We have orders scheduled into 2022 already. Nothing is holding us up from making barrels. Just not enough hours in the week!

Any questions please feel free to call. If you post a question here I'll answer it the best I can and as quick as I can but keep in mind...I don't log in everyday.

Later, Frank
Bartlein Barrels

All prices below are shipped within the USA only:

1. ARC 30mm 32mm height 0moa mount - $160 SOLD
2. HRD arca rail UAF-09 - $60
3. KAC flip up sights - $125 - SOLD
4. MPA 30cal black 5/8x24 brake - $80
5. KAC SR-25 buffer 21057 - $90

buy it all remaining for $125

Zelle, check or money order for payment

Please message me to buy

Looking to order a PVA prefit to replace a bartlein at the end of the year on my match gun. Undecided on getting another bartlein and waiting, and shipping and waiting or just ordering a PVA prefit. Looking to hear experience, good, bad, ugly. Specifically likely going with a 6.5cm 7.5twist shouldered for a tikka.

Let me know your experience.

I’m looking to pick up a fun range pistol in 9mm. My plan is to spend around $2,000 on it. I’m ok buying used. Do I look at the CZ Shadow, Staccato P, or something different?

Pretty sure it won’t work since I’ve used SR25 mags in my Xanthos-based AR10 build, and the Genesis upper specifically states it was designed to work on a DPMS (Gen 1) patterned lower, but curious if anyone’s tried it yet.

This one: https://www.genesisarms.com/product-page/gen-12-upper-only

Edit: It may actually work. The ability to use SR25 mags doesn’t necessarily mean DPMS incompatibility if I’m reading various sources correctly. I ‘think’ Genesis is referring to the cut at the back of the receiver, and it appears my Xanthos has the same radius cut as the Genesis (vs the SR25 slant cut).