For sale is a MPA BA Chassis for a CZ 457. This was purchased used by me a few years ago. I ended up barely using it.

Im asking $550 shipped. But if my pricing is way off, please let me know. The only trade I would be interested in is a MDT Field stock for a CZ 457 in green if possible.

Thank you for looking.

Brand new ReachIR LRF rangefinding monocular in stock ready to ship!

DM for unbeatable prices.

The FULL ReachIR Product Line:

AGM ReachIR LRF 25-384

AGM ReachIR LRF 35-640

AGM ReachIR LRF 50-640

Login to view embedded media
Later, Zac

Ok, no more drip feeding, it's time for full fire hose.

The VGW V-22 is a true-to-scale mid-lock rimfire bolt action with integral recoil lug. One of the many unique features of this design is, for a mid-lock, there are no lug ways forward of the lug abutment in the receiver. The rail is MilStd 1913, available in 0, 25 and 30 MOA. The action is currently in full production and available from Vudoo Gun Works in St. George, UT.

















This rifle has no finish on it yet and of course, it uses my AICS patterned magazine that is currently fielded in many 40X Repeater Conversions. The action is a direct drop in to any Rem700 Short Action Stock or Chassis, with the only accommodation being the ejection port is shorter than the standard Rem700/40X length port. Unlike the 40X Rimfire, the lugs in the VGW V-22 are concealed.

I'll be spending more time on the range tomorrow and will post video of it cycling, but it runs like a Swiss watch.

Thanks, Guys....

MB

Curtis Custom Axiom action, Gre-Tan chambered 6.5 CM, 22" Oregon Mtn Carbon Fiber Barrel with 3 port self timed brake 5/8x24. Trigger Tech Primary, DBM bottom metal, McMillan Game Warden bedded stock.

$3500 buys it.

Will trade towards a IRAYRH25V2

Noveske 16” 308 Barrel with a 1/10 twist and Muzzle brake is a FCD keymo brake, Noveske Gas Block and gas tube that was matched and fit at Noveske. Noveske also matched and headspaced the barrel with the Noveske Dual ejector bolt carrier group when assembled at Noveske. Also included is the Noveske ambi charging handle. I’d like to sell this together. $700 buys it all which is a great deal!

Christensen Arms Ridgeline model 14, 6.5 Creedmoor with 24" Carbon Fiber barrel. These come with nice lite weight stock and a Trigger Tech Trigger. This gun is very accurate! Will shoot .5-.6moa with factory 140 grain Hornady Match Ammo and will get better as more rounds are sent through the barrel. I only have 35-40 rounds down the barrel and have not had one issue. Only selling due to recently getting a custom built 6.5 Creedmoor so I no longer need this one.
$1600 buys it shipped from my FFL to yours!!

Like New Pulsar Merger LRF XQ35 Thermal Binoculars. They are extremely nice and detection range is pretty impressive as well. Only selling because I ended up going with a helmet set up. $2800 buys it!!

throw in the bino case with pistol holster for another $100. Will not sell them before I sell the binos.

Only trades considered would be Iray RH25V2 plus cash on my end or a 22 Creedmoor build. Prefer proof CF barrels.

MTEK FLUX CARBON-V rattle canned.
This is a package deal which includes the fluxliner size 1 padding kit, Wilcox G24 coyote mount, TNVC woodland battery/weight pack, Bifrost gear adapters articulating for your hearing needs and 3M Adapters.
$1100 buys it all!!

This certificate is good for 50% off a Thunder Beast Arms suppressor with an MSRP of $2500 or less.

$400

Swavorski X5 3.5-18x50 P with BRM Reticle.
Was mounted and never even taken to the range. My loss is your gain!
First $1700 buys it!!

Trades:
Iray RH25V2 with cash on my end

I'm left-handed and getting fairly serious about precision rimfire (PRS, NRL22). I have shot right-handed bolt guns my entire life. I currently run a heavy barreled B14R, and I feel that it hasn't held me back up to this point. Right now, I come off of the rifle with my support hand to run the bolt.

Looking for the opinions of people who have done this way longer than I have and who can steer me in the right direction!

Looking to finish an A-5 Build.

Have a question for you all on Temp stability on Powder.
I am getting ready to work on a 6 Arc I have in a gas gun. From all the reading I do the Leverevoloution powder shows to have the best velocity as well as the best ES/SD numbers from everything I have read.
But I have also seen where a lot say it is not temp stabile as some other powders.
I plan to hunt with this rifle this year so the temp stability is pretty important to me as during our seasons it might be 70 degrees one day and two days later it might be 10 degrees.
Have any of you all seen temp issues from the LVR powder that you would consider an issue?

I have Varget at home as well but it seems to yield a lower velocity but I know it is much more temp stable.
There are other powders that are listed for the 6Arc but they are also harder for me to get ahold of.
The only other easily obtainable powder for me is CFE223. But I have never used it so don't know much about it.

Just looking to get some opinions from you all that have more experience than me.

Pristine condition. Has been painted. Spent well over 4 hours removing. 99.92% removed.

Have box paperwork etc. Also a full set of Tenebraex flip caps.

This was originally a factory condition A+ demo.

Happy to send a video for your assessment of the condition.

$1850 tyd insured.

No trades.

Selling a Burris XTR PRO 5.5-30x56, SCR2 MIL, Black Color. Was mounted but never fired.

$1400 shipped

Trijicon RCR, was mounted on a rifle as an offset dot, never fired.

$500

Text me for pics of reamer and whatever info I have. 4804678090

These are good live pilot finishing reamers with 10-15 uses on each. Plenty of life left. Hell I don’t even like reamers until they’ve cut 10+ chambers.

I bought these at the start of my career about 14 years ago and back then deferred to the tool makers suggestions or just bought a saami reamer. Now all my reamers come from JGS and they mark the shank of each one with critical specs. Having every detail lasered onto the side of your reamer is priceless… but 14 years ago I hadn’t realized that yet.

Reamers should be saami minimum body, and in most cases a saami fb/throat. You can often look at the throat grind and get an idea of how long it is, and 1-30 seems to be the most common lead angle by far, so I can usually look at a reamer and have some idea of its throat dimensions.

300 win mag HSS print #T23217
$60
Looks like a shorter saami throat, should be fine for 300wm factory ammo.

6.5x47 Lapua HSS
$60 shipped
Looks like a typical x47 throat… like .150” fb


7 Rem mag HSS PTG 190982
.090” fb 1-30 lead
.317 neck
$60 shipped
This reamer has its specs printed on it


338 Lapua mag PTG
$60 shipped
box says T23218 from PTG. It built some accurate lapuas 10 years ago but I can’t guess the freebore dimensions by looking at this one. It looks pretty long, like .160” fb or so, which I say is long because of the magazine length restrictions the 338lapua faces. 3.850” just ain’t long enough with the 300gr berger elites unless you have very little freebore. The older 300s and the 250s/285s seemed to easily fit 3.850” with some throat length and still reach lands, but lately with guys shooting the 300gr Berger elites I’ve had to use my shortest throated Lapua reamer(.070”)

Wanting to sell my 18” terminus Zeus build. Build specs are Zeus qc short action, TT diamond, 18” m24 bartlein, bedded in a manners T4A, smithed by Deep South Tactical. Shoots very well with factory hornady eldm and cycles well with AW mags. Asking $3000 shipped to the lower 48.

Just finished up.

Specs: 24lbs without ammo
Rimx
PVA 1.20 straight 24”
ATS tuner with 1.20 jam nut drilled for pin spanner wrench
TT Diamond
Area 419 scope mount
MPED for now (Mark 4hd is in for QC issues)
SG Pulse
Atlas CAL gen 1 with custom steel mount to RRS clamp. Oversized extended clamp wheel
MPA Matrix Pro 2 ordered from DI raw and had a local ano shop finish in splash
Delrin cheek riser with aluminum pins
Kick Eez Rocker recoil pad (12.5” +/- LOP)
Chopped mag blocker
Chassis drilled for Vanquish add ons
Extended Vert 2 grip
Grip relocated 1” forward. 100% backwards compatible.
Modified MPA thumbrest moved forward 1”

After hours of research I am still coming up short on a fix for my feed issue.
Savage 110 6.5 creedmoor same issue 2 different mags.
I tried to post a video but I haven't figured that out yet. The pictures show a round that is incapable of moving forward, I have to move the bolt back slightly for the round to align properly with the bolt face before it will chamber.

I started a 6arc build, but never finished it because I stayed with 6mm CM. Its been in my safe since November and hasn't been shot. Parts are listed below, $975
to your FFL.

New Frontier Armory lower
Geissele mk8 rail and trigger
Shaw 18 inch Barrel and bolt
Seekins adjustable gas block
Magpul PRS Lite stock
American Defense 34mm scope mount

Rugged remote Idaho spring bear hunt (flying into the Frank Church), we'll be trying to avoid any unnecessary weight. Trying to decide whether to take a bipod or a tripod, leaning towards the latter. My hunting buddy says re: RRS "no way man! Those things are too damn heavy!" He's looking at the AZIAK Ridgeline. I'm thinking that thing is too flimsy, too short, and to made in China-ey, but at 1.5# it's a full 2# lighter than the RRS 14L

Has anybody carried a 14L straight up a hill for several miles and several thousands of feet and regretted it or not?

What's the best compromise of weight, stability, and height for this application?

Member posted or messaged an I'll take it" for items I am selling and failed to respondto my replies or attempted further communication.

For sale is a Spuhr SP-4601 in 34mm and 20.6 moa cant. It comes with the leveling tool and a Holosun EPS canted mount.

Asking price is $350. Thank you for looking.