• Having trouble using the site?

    Contact support
  • You Should Now Be Receiving Emails!

    The email issued mentioned earlier this week is now fixed! You may also have received previous emails that were meant to be sent over the last few days - apologies, this was a one time issue and shouldn't happen again!

Filter

SOLD Bcm MCMR 9 and Surefire Scout light Fde

I got both in a trade and never used either so I’m trying to get some funds for another project.

BCM Mcmr 9” m lok handguard. It was on an upper I traded for and I put a different rail on it. SOLD PENDING FUNDS

Surefire Scout light FDE with mlok mount. Works good. I never even mounted it or used it. $175 shipped obo

Will consider trades for ar uppers or upper parts. Would consider trading both for an Eotech exps or Trijicon mro. Would also trade for threaded savage short action barrel depending on the caliber. Also interested in red dots for pistols

Let me know anything else for trade. Never know what I might like or want.





IMG_2683.jpeg

Bargara Ridgeback .300 PRC won’t eject?

Hello all, just picked up my Bargara Ridgeback .300 PRC and while doing a functions check with a live round from the mag the rounds get stuck at the end of the bolt cycle and won’t eject. Haven’t shot the rifle yet just wanted to see how it feeds and ejects and just won’t eject. Be honest just upset just spend 2k on a rifle that’s doing this, this is my first Bergara wanted to try them after using Tikkas for some time. Any help would be appreciated.

Attachments

  • 3C724511-6875-4B86-85F0-681A811F6DD8.jpeg
    3C724511-6875-4B86-85F0-681A811F6DD8.jpeg
    370.4 KB · Views: 87

Reloading Equipment Dies and dies

1. RCBS 38/357 special die set with extra bullet nose seaters, taper crimp die, sizer missing decapper $30 shipped

2. Redding 7 mag competition micro sizer and micro seater with body die. $85 shipped SOLD

3. Hornady 223 custom grade FL 2 die set with shoulder bump gauge $30 shipped SOLD

4. RCBS 223 small base sizer $20 shipped

5. Lee 7-30 waters $25 shipped still available

6. Redding Premium 6.5 PRC 3 die set, micro seater. $80 sold
  • Like
Reactions: siple

SOLD Leupold VX-L 6.5-20X56, Varmint Hunters Reticle, 30mm, Side Focus

Leupold VX-L 6.5-20X56. Target Turrets, Varmint Hunters reticle, 30mm, Side Focus, and the very hard to get Alumina covers. Rings included. $1000 shipped.

Reduced $900 shipped.

Reduced $800 shipped.

Attachments

  • 20241019_185846.jpg
    20241019_185846.jpg
    441.2 KB · Views: 87
  • 20241019_185902.jpg
    20241019_185902.jpg
    450.4 KB · Views: 79
  • 20241019_185911.jpg
    20241019_185911.jpg
    474.7 KB · Views: 75
  • 20241019_185916.jpg
    20241019_185916.jpg
    442.2 KB · Views: 77
  • 20241019_185931.jpg
    20241019_185931.jpg
    471.5 KB · Views: 81

SOLD Tangent Theta TT315P 3-15x50 Gen 2 XR LNIB

Tangent Theta TT315P 3-15x50 Gen 2 XR with Tangent Theta Throw Lever and Nightforce Ultralight Rings. Original docs and box and sunshade included. Excellent condition.

May consider partial trade on lightweight hunting glass.

$spf

Attachments

  • 20241030_210805.jpg
    20241030_210805.jpg
    548.4 KB · Views: 97
  • 20241030_210816.jpg
    20241030_210816.jpg
    352.9 KB · Views: 90
  • 20241030_210829.jpg
    20241030_210829.jpg
    323.1 KB · Views: 96
  • 20241030_192707.jpg
    20241030_192707.jpg
    780.9 KB · Views: 92
  • Like
Reactions: Scope_Wrangler_2020

No voter ID required? Ok here we come!

We got to start fighting fire with fire and play/expose the lefts games with them. These states like Commieforna that want to make requiring an ID to vote against the law ok let's organize bus loads, carloads, truckloads, motorcycle rides whatever it takes of people to show up and vote at these places to offset the known cheating. We need to encourage people in those states to vote often. If I lived in one of those states, I would take the whole week off and just drive from voting place to voting place and vote as many times as time would allow fuck it why not? They can't ask for ID why not. Before someone says well they could get you on camera at multiple voting places. My answer for that "I didn't actually cast the ballot I just wanted to make sure the ballots were correct" How can they prove otherwise. Could you imagine if a busload of obvious Trump voters showed up how quick they would reverse policy and ask for an ID.

SOLD Wilson Combat 6.8 SPC barrel/bolt/ammo/dies

Switching up my hunting rifle. Looking to sell as a package including the following. Not looking to split up at this time. Rifle shot great and killed a couple deer for me with the 110 accubonds. Overall it is in great shape, round count is around 100. Asking $400 tyd

Barrel- Wilson Combat Recon (fluted) 16” 1-11 twist 6.8 SPC II barrel with their black “Tuff Armor” coating. Also including the Aero mid length melonited gas tube that was used for it

Bolt- Wilson Combat NiB coated 6.8 bolt

Loaded ammo-
-42 rounds of 110 Accubond SSA ammo
same lot number
-41 rounds of Hornady custom 120 SST
-8 rounds of 115gr federal fusion

Bullets-
-100pcs 120gr SST unopened
-84pcs 85gr Makers Rex (similar to Barnes lrx)

Dies- Lee 3 die set w/ shell holder
IMG_9621.jpeg

Attachments

  • IMG_9613.jpeg
    IMG_9613.jpeg
    562.5 KB · Views: 32
  • IMG_9610.jpeg
    IMG_9610.jpeg
    439.6 KB · Views: 35
  • IMG_9611.jpeg
    IMG_9611.jpeg
    566.6 KB · Views: 34
  • IMG_9614.jpeg
    IMG_9614.jpeg
    881.9 KB · Views: 31
  • IMG_9615.jpeg
    IMG_9615.jpeg
    509 KB · Views: 29
  • IMG_9616.jpeg
    IMG_9616.jpeg
    828.9 KB · Views: 26
  • IMG_9617.jpeg
    IMG_9617.jpeg
    863.2 KB · Views: 31
  • IMG_9618.png
    IMG_9618.png
    261.7 KB · Views: 33
  • IMG_9619.png
    IMG_9619.png
    252.1 KB · Views: 35
  • Like
Reactions: fanninland

Firearms Canik Rival Darkside w/ Cmore dot

I thought I was going to get back to USPSA shooting, but I'm not. This is the pistol with everything that came with it originally, holster, 3 magazines, all the different sized backstraps, mag well funnel, plates for various dots. Two of the magazines have T/F magazine extensions making them 22 rd capacity, 3rd is std 18 rounder. Also Cmore dot with probably 300 rds on it. Asking $600, shipped and insured to your FFL.

Attachments

  • canik cropped.jpg
    canik cropped.jpg
    1,017.1 KB · Views: 168
  • Like
Reactions: Kyle1077

Berger 245 lrht

Looking for guys who are running this bullet and experience with it.

What is the bc you guys are using?
Kestrel doesn't have it in bullet profile yet so are you using the 245 eol? Or just custom g7 ect?

How easy is this bullet to tune I've heard a few guys say it's harder than the 220 which is a dream to get to shoot straight.

I shoot the 220 but thinking on trying some 245 in 300 norma improved.

White feather stock

I am having a rifle made. I found a stock at a retired gunsmith who is selling off this stock. He claimed it was Carlos's and was wondering if I should refinish or keep original. I don't doubt the validity of the smith.. local pastor..photos of the two of them... eastern North Carolina..ect. Just want to do right by him..

Attachments

  • 20241019_084132.jpg
    20241019_084132.jpg
    252.2 KB · Views: 204

Handloading rimfire (w/ vid)

Hey guys! Just thought I would share how I handload my 17HMR ammo (and other rimfires) for extreme consistency and ELR shooting. I also reload spent brass, but am not covering that in this video. Another video to come for reloading this winter. Just know, this is NOT cost effective at ALL. I do this because of the performance gains, not for saving money. It's a very time consuming and labor-intensive process, but well worth it!

Login to view embedded media

Accessories 6 GT package

6 GT barrel cut for a Kelbly's Atlas Tactical, Benchmark med palma 7.5 twist, chamber done by Straight Jacket Armory -$700

100 piece of unfired GAP 6 GT-$75

RCBS Match master 6 GT die set-$125

$800 for all of it.

Would like to sell barrel before I split it all up.

Attachments

  • IMG_0148.jpg
    IMG_0148.jpg
    112.3 KB · Views: 118
  • IMG_0149.jpg
    IMG_0149.jpg
    119.7 KB · Views: 117