It's Hunting Season: Show Us Your Rack!
- By alexj-12
- The Bear Pit
- 187 Replies
Hunting season is finally here and we want to see pictures of your rack! Show us what you've got and we'll throw in a few t-shirts to people that send pics 
-
Having trouble using the site?
Contact support
Posts
Reloading Equipment Brass Shavings Catchers
- By STI_1911_Guy
- Buy - Sell - Trade
- 73 Replies
Ive been going around and making items for my reloading hobbies and I have made some brass catchers to save some clean up time for the trimmers I use. If anybody could use one I can print more up. I can customize other items also if needed. Shoot me a PM. can do black or red for any of them. If not specified I will ship what I have ready.
$28 RCBS Trimmer And Trim Pro II: This shavings catcher will work with the old rcbs trimmer or the trim pro II. If you have the old trimmer that takes shell plates let me know so I can send the pilot holder that has places for the shell plates, otherwise the trim pro II pilot rack only has places for the pilots. The pilot rack can be bench mounted or wall mounted. The catcher pan will just sit on the trimmer and can be removed to empty. This will come with a press fit cutter shroud to help contain brass from flying outside the catcher if running the cutter at high speed. I would only recommend using the shroud if needed. To install the shroud be careful pressing on and only press as far as to align with back of cutter head.
$25 TYD ( $35 TYD Large case collet holder) LE Wilson brass catcher: catcher for the LE wilson trimmer: The catcher sits on the rails and is matched to lock in place. When you are ready to empty just lift it off and dump it. This also has a rack that can be mounted on the wall or shelf for the case collets (7) and allen wrench.*****I have included a new option of a covered 14 case collet holder instead of the uncovered 7. If you want the Covered 14 model the cost will be $35 TYD. It will come standard with the uncovered 7 holder so if you want the larger one you must specify. Thanks.
$25 TYD Hornady Cam Lock Trimmer Brass Catcher: The catcher tray is magnetically attached to the blade cover so all you have to do is pull it off, empty it and place it back on. Also includes the Pilot rack that holds the allen keys and pilots. this pilot rack can be mounted to the table, wall or just sat on top of a bench/shelf.
$25 TYD Lyman Express Trimmer Brass Catcher: This has a basket that just slides underneath the trimmer head that catches the shavings. Remove it and dump them out. Also has a small collet rack that can sit on the trimmer or just sit on the bench. One of the images shows my first larger collet rack but thats too bulky, only going with the smaller one but the image shows how it sits on the trimmer.
$15 TYD Hornady Trio Brass Catcher: This has a basket that just slides underneath the trimmer head that catches the shavings. Remove it and dump them out.
$17 Frankford Arsenal Brass Catcher: This has a basket that just slides up to the trimmer head that catches the shavings. Remove it and dump them out. Will work with Both frankford models.
$27 TYD Forster Original Trimmer brass catcher: The catcher sits on the rails and can be moved left or right. When you are ready to empty just lift it off and dump it. This also has a rack that can be mounted on the wall or shelf for the case collets (6) and allen wrench and pilots.
$27 TYD Redding 2400 Trimmer Brass Catcher: The catcher sits on the trimmer under the cutter and can be moved left or right. When you are ready to empty just lift it off and dump it. There is also a shroud that can be used to cover the cutter to help prevent brass from flying outside the catcher basket, if you are not spinning the case very fast then the shroud isn't needed. This also has a rack that can be mounted on the wall or shelf for the pilots and tools.
$26 TYD Lyman Universal Trimmer Brass Catcher: The catcher sits on the trimmer under the cutter and can be moved left or right. Since the cutter base has a radius, if the catcher isint staying where you need it you can use one of the pilots to place into the pilot holes right behind the catcher basket to keep it from sliding toward the middle. When you are ready to empty just lift it off and dump it. There is also a shroud that can be used to cover the cutter to help prevent brass from flying outside the catcher basket, if you are not spinning the cutter very fast then the shroud isn't needed. This also has a rack that can be mounted on the wall or shelf for the pilots and tools.
Other items people have requested: Hyperlink
$28 RCBS Trimmer And Trim Pro II: This shavings catcher will work with the old rcbs trimmer or the trim pro II. If you have the old trimmer that takes shell plates let me know so I can send the pilot holder that has places for the shell plates, otherwise the trim pro II pilot rack only has places for the pilots. The pilot rack can be bench mounted or wall mounted. The catcher pan will just sit on the trimmer and can be removed to empty. This will come with a press fit cutter shroud to help contain brass from flying outside the catcher if running the cutter at high speed. I would only recommend using the shroud if needed. To install the shroud be careful pressing on and only press as far as to align with back of cutter head.
$25 TYD ( $35 TYD Large case collet holder) LE Wilson brass catcher: catcher for the LE wilson trimmer: The catcher sits on the rails and is matched to lock in place. When you are ready to empty just lift it off and dump it. This also has a rack that can be mounted on the wall or shelf for the case collets (7) and allen wrench.*****I have included a new option of a covered 14 case collet holder instead of the uncovered 7. If you want the Covered 14 model the cost will be $35 TYD. It will come standard with the uncovered 7 holder so if you want the larger one you must specify. Thanks.
$25 TYD Hornady Cam Lock Trimmer Brass Catcher: The catcher tray is magnetically attached to the blade cover so all you have to do is pull it off, empty it and place it back on. Also includes the Pilot rack that holds the allen keys and pilots. this pilot rack can be mounted to the table, wall or just sat on top of a bench/shelf.
$25 TYD Lyman Express Trimmer Brass Catcher: This has a basket that just slides underneath the trimmer head that catches the shavings. Remove it and dump them out. Also has a small collet rack that can sit on the trimmer or just sit on the bench. One of the images shows my first larger collet rack but thats too bulky, only going with the smaller one but the image shows how it sits on the trimmer.
$15 TYD Hornady Trio Brass Catcher: This has a basket that just slides underneath the trimmer head that catches the shavings. Remove it and dump them out.
$17 Frankford Arsenal Brass Catcher: This has a basket that just slides up to the trimmer head that catches the shavings. Remove it and dump them out. Will work with Both frankford models.
$27 TYD Forster Original Trimmer brass catcher: The catcher sits on the rails and can be moved left or right. When you are ready to empty just lift it off and dump it. This also has a rack that can be mounted on the wall or shelf for the case collets (6) and allen wrench and pilots.
$27 TYD Redding 2400 Trimmer Brass Catcher: The catcher sits on the trimmer under the cutter and can be moved left or right. When you are ready to empty just lift it off and dump it. There is also a shroud that can be used to cover the cutter to help prevent brass from flying outside the catcher basket, if you are not spinning the case very fast then the shroud isn't needed. This also has a rack that can be mounted on the wall or shelf for the pilots and tools.
$26 TYD Lyman Universal Trimmer Brass Catcher: The catcher sits on the trimmer under the cutter and can be moved left or right. Since the cutter base has a radius, if the catcher isint staying where you need it you can use one of the pilots to place into the pilot holes right behind the catcher basket to keep it from sliding toward the middle. When you are ready to empty just lift it off and dump it. There is also a shroud that can be used to cover the cutter to help prevent brass from flying outside the catcher basket, if you are not spinning the cutter very fast then the shroud isn't needed. This also has a rack that can be mounted on the wall or shelf for the pilots and tools.
Other items people have requested: Hyperlink
Attachments
Poor kid , racist whitey
- By scotty2hotty
- The Bear Pit
- 126 Replies
'Cowardly violence is pathetic': Father speaks out after teen son is brutally beaten to death in Las Vegas by 15 teenagers | Blaze Media
A teenage boy lost his life after he was severely beaten by 15 people near a high school in Las Vegas, according to his father. Las Vegas Metropolitan Police officers responded to a battery call near Rancho High School on Nov. 1. KVVU-TV reported that police found a student who was "battered and...
www.theblaze.com
WtF is going on. I live near Detroit/Ypsilanti . Last week my friend told me there were a bunch of them acting crazy on the bus. The bus driver told them to stop but they did5. He got off quick with two other people. He asked them what was going on in the bus. They said they are just being kids. He could have been in this poor kids situation. This won't make the MSM.
Reloading Equipment K&M Neck Turning Tool Organizer
- By STI_1911_Guy
- Buy - Sell - Trade
- 51 Replies
****New items added to the hyperlinks*******
Printed up an organizer for my K&M equipment since I dont have a case. Also made a "gripper nut" for the shell holder to make it easier to tighten and loosen the case holder. If anybody could use one. If anybody has any questions or custom requests please let me know.
$33 K&M Turning tool organizer (includes gripper nut and set screws): Has the organizing rack that holds 10 total expanding mandrels or turning pilots in any combination, 7 shell holders, 5 of the threaded cutting bits, the turning tool, expanding mandrel holder and the shellholder tool. Can be mounted to the wall via 2 #8 screws or sat on a shelf.
$18 Gripper Nut Only (with set screws): Gripper nut to fit over the shell holder tool making it easier to remove cases. When installing this on the shell holder tool, align the hex shapes and press the tool all the way into the printed holder making sure its fully seated and then tighten the two set screws until they are just below visible. If excessive resistance is felt while tightening the set screws make sure the tool is fully seated into the printed holder. It is a snug fit and can seem like its full when it is not.
Other items people have requested:
Printed up an organizer for my K&M equipment since I dont have a case. Also made a "gripper nut" for the shell holder to make it easier to tighten and loosen the case holder. If anybody could use one. If anybody has any questions or custom requests please let me know.
$33 K&M Turning tool organizer (includes gripper nut and set screws): Has the organizing rack that holds 10 total expanding mandrels or turning pilots in any combination, 7 shell holders, 5 of the threaded cutting bits, the turning tool, expanding mandrel holder and the shellholder tool. Can be mounted to the wall via 2 #8 screws or sat on a shelf.
$18 Gripper Nut Only (with set screws): Gripper nut to fit over the shell holder tool making it easier to remove cases. When installing this on the shell holder tool, align the hex shapes and press the tool all the way into the printed holder making sure its fully seated and then tighten the two set screws until they are just below visible. If excessive resistance is felt while tightening the set screws make sure the tool is fully seated into the printed holder. It is a snug fit and can seem like its full when it is not.
Other items people have requested:
| ||||||||||||||||||||||||||||||||||||||||||
Hanukah came early
- By faylix
- Semi-Automatic Rifles
- 11 Replies
Holidays came early this year.
Match style preban 223 Wylde 20" white oak armament that I picked up on Black Friday for a song.
I have a mars-L lower and some spare parts that would look pretty 69 shades of fde.
Or I could take my 16 inch Larue barrel out of my current PRS setup and install this one.
What say the hide?
Reloading Equipment Hornady OAL Tool Organizer
- By STI_1911_Guy
- Buy - Sell - Trade
- 56 Replies
****New items added to the hyperlinks*******
Send me a PM if interested.
I printed this for me and a few other members if you think you could use one let me know. $35 TYD. This item has places for 2 lapua sized modified cases, 4 magnum size modified cases and 6 308 sized modified cases. This also has a place for both types of tool holders the straight rod and the angled rod, plus space for the drill and tap if you have it to make your own cases. this will sit atop a bench or shelf but can also be mounted to the wall via 2 #8 screws. Protect your investment! Let me know if you have any questions. Custom requests accepted also.
Other items people have requested: Hyperlink
Send me a PM if interested.
I printed this for me and a few other members if you think you could use one let me know. $35 TYD. This item has places for 2 lapua sized modified cases, 4 magnum size modified cases and 6 308 sized modified cases. This also has a place for both types of tool holders the straight rod and the angled rod, plus space for the drill and tap if you have it to make your own cases. this will sit atop a bench or shelf but can also be mounted to the wall via 2 #8 screws. Protect your investment! Let me know if you have any questions. Custom requests accepted also.
Other items people have requested: Hyperlink
| ||||||||||||||||||||||
Accessories KMW Sentinel Stock - Rem 700 Short Action - RH - $1100 shipped
- Buy - Sell - Trade
- 10 Replies
Attachments
Reloading Equipment Giraud Trimmer Organizer
- By STI_1911_Guy
- Buy - Sell - Trade
- 79 Replies
Attachments
Night Vision The Official: Steiner C35 Thermal Clip-on Review and User Thread!
- By TheHorta
- Observation & Sighting Devices
- 1314 Replies
So, Charles / HebrewHammer sent me a Steiner C35 to get my thoughts on it. I haven’t bought one (yet), but with a full LIST price of just $4K for a legit 640px dedicated thermal clip-on with HD display, I’m gonna grab one anyway (be sure to have mercy on a poor ol’ Horta, Mr Hammer).
I’m a big fan of getting the negatives out of the way first, so I’m going to beat the C35 up a little before going into what it does very well, which is what it was designed to do.
First, the C35 is a fricking Brick House! At over 35-ounces with battery installed, it’s the heaviest consumer thermal I own. It’s big and bulky compared to its competitors as well. I don’t own any Yoter/Bering stuff, so I can’t compare with their units.
Second, the battery is a funky 18650 “B”. You can NOT use a standard 18650. It won’t fit. One is included, but you’ll need to get more or — use an external Anker-style USB pack.
The rail mount is a monster and the QD throw lever is a boat paddle.
I’ve looked all over the unit itself, the packaging, and the documentation and I can’t, for the life of me, figure out where this thing is made. Someone help me out here… WHERE IS THIS DAMN THING MADE?!
I figured it was from Chynah and the core was likely iRay, but I’m not so sure. The unit has the funky FLIR Boson color pallettes, so there is a slim chance it may NOT be Chinesium (fingers crossed).
More (good news) to come shortly. Dinner time.
Initial presentation:
The Razor 1-10x is in a 1.57” Scalarworks mount, so the C35 looks to be designed for a 1.5” optic.
“The Crew” of comparison thermals:
The Testbed — Geissele SOCOM SD, Razor G3 1-10x in Scalarworks, other meaningless trinkets. Will be testing the C35 for POI shift on multiple guns/optics pairs.
Pre-fight contender weigh-in: First, the Heavyweight! Steiner C35:
Next, the longtime Reigning World Clip-on Champion! BAE/Oasys/Trijicon UTC-Xii:
The reigning Middleweight Champion of the World! BAE/Oasys/Trijicon UTM-x:
The recently-dethroned lightweight World Champion! BAE/Oasys/Trijicon SkeetIR-x!
The NEW Lightweight Champion of the World! Pixels on Target (PoT) Voodoo-S!
The Slant-eyed Lightweight Contender from Chynah! The iRay USA RH-25 Choodoo:
Ze German contender from ze Fatherland, the Andres Industries TigIR-6M!
And last but not least, a lightweight contender from Planet Unobtanium! The BAE FWS-i:
ALL units were weighed in full USABLE form — meaning batteries were installed and their rail mounts were on.
I’m a big fan of getting the negatives out of the way first, so I’m going to beat the C35 up a little before going into what it does very well, which is what it was designed to do.
First, the C35 is a fricking Brick House! At over 35-ounces with battery installed, it’s the heaviest consumer thermal I own. It’s big and bulky compared to its competitors as well. I don’t own any Yoter/Bering stuff, so I can’t compare with their units.
Second, the battery is a funky 18650 “B”. You can NOT use a standard 18650. It won’t fit. One is included, but you’ll need to get more or — use an external Anker-style USB pack.
The rail mount is a monster and the QD throw lever is a boat paddle.
I’ve looked all over the unit itself, the packaging, and the documentation and I can’t, for the life of me, figure out where this thing is made. Someone help me out here… WHERE IS THIS DAMN THING MADE?!
I figured it was from Chynah and the core was likely iRay, but I’m not so sure. The unit has the funky FLIR Boson color pallettes, so there is a slim chance it may NOT be Chinesium (fingers crossed).
More (good news) to come shortly. Dinner time.
Initial presentation:
The Razor 1-10x is in a 1.57” Scalarworks mount, so the C35 looks to be designed for a 1.5” optic.
“The Crew” of comparison thermals:
The Testbed — Geissele SOCOM SD, Razor G3 1-10x in Scalarworks, other meaningless trinkets. Will be testing the C35 for POI shift on multiple guns/optics pairs.
Pre-fight contender weigh-in: First, the Heavyweight! Steiner C35:
Next, the longtime Reigning World Clip-on Champion! BAE/Oasys/Trijicon UTC-Xii:
The reigning Middleweight Champion of the World! BAE/Oasys/Trijicon UTM-x:
The recently-dethroned lightweight World Champion! BAE/Oasys/Trijicon SkeetIR-x!
The NEW Lightweight Champion of the World! Pixels on Target (PoT) Voodoo-S!
The Slant-eyed Lightweight Contender from Chynah! The iRay USA RH-25 Choodoo:
Ze German contender from ze Fatherland, the Andres Industries TigIR-6M!
And last but not least, a lightweight contender from Planet Unobtanium! The BAE FWS-i:
ALL units were weighed in full USABLE form — meaning batteries were installed and their rail mounts were on.
SOLD Sold
- By Jabot
- Buy - Sell - Trade
- 1 Replies
400 rounds on it, recorded all shots in my binder.
Proof comp contour threaded 5/8-24
With a mdt comp break in 6mm
Sold
900 + pieces of lapua brass
Some fired twice some fired 5 times
$340 shipped
Some diprimed,, some not
All together, not sorting them out
Buyer has first shot at brass
6 unopened boxes of 75 gn eld
Plus one opened box
2 unopened box's 88 eld
Buyer has first shot at theses as well
Proof comp contour threaded 5/8-24
With a mdt comp break in 6mm
Sold
900 + pieces of lapua brass
Some fired twice some fired 5 times
$340 shipped
Some diprimed,, some not
All together, not sorting them out
Buyer has first shot at brass
6 unopened boxes of 75 gn eld
Plus one opened box
2 unopened box's 88 eld
Buyer has first shot at theses as well
Reloading Equipment SuperTrickler Accessories
- By pfl338
- Buy - Sell - Trade
- 44 Replies
This kit helps eliminate the stray powder kernels during hopper loading of the SuperTrickler and clearing out the hopper without having to shake the unit and try and open the trap door with one hand while holding over a container.
The funnel is a very light press fit into the top of the SuperTrickler by way of having a 3 deg. taper on the mating diameter.
Form fit and function tests were completed by another SH board member, I have several units printed up and ready.
Complete kit- 75.00 shipped Priority mail ( includes the baffle assembly)
Funnel and lid -20.00 shipped USPS
Powder Tube catch -18.00 shipped
The funnel is a very light press fit into the top of the SuperTrickler by way of having a 3 deg. taper on the mating diameter.
Form fit and function tests were completed by another SH board member, I have several units printed up and ready.
Complete kit- 75.00 shipped Priority mail ( includes the baffle assembly)
Funnel and lid -20.00 shipped USPS
Powder Tube catch -18.00 shipped
Attachments
SOLD WTS: Manners LRH, Hawkins Hunter, Aero Solus, Bartline Barrel TriggerTech
- By erod007
- Buy - Sell - Trade
- 7 Replies
Looking to move out of my 6.5 SAUM build. would be willing to part out as listed below but would give a better deal if bought as a whole. Rifle shoots exceptionally well, .5 MOA at 100 shooting Berger 140 at 3100 FPS
Rifle as it sits - $2200
Aero Solus Barreled action - $1300
- Solus SA with Mag bolt face
- Bartline barrel chambered in 6.5 SAUM by straightjacket, 22 inch 7.5 twist with ~975 rounds on it
- Triggertech Special trigger
- Area 419 hellfire universal adaptor
Manners Stock and Bottom Metal - $1300
- Manners LRH WITHOUT Mini Chassis
- Hawkins Hunter Bottom metal
- Hawkins Hunter Magnum Mag
- Salmon River Hunter Rail
Please let me know if you have any questions
Rifle as it sits - $2200
Aero Solus Barreled action - $1300
- Solus SA with Mag bolt face
- Bartline barrel chambered in 6.5 SAUM by straightjacket, 22 inch 7.5 twist with ~975 rounds on it
- Triggertech Special trigger
- Area 419 hellfire universal adaptor
Manners Stock and Bottom Metal - $1300
- Manners LRH WITHOUT Mini Chassis
- Hawkins Hunter Bottom metal
- Hawkins Hunter Magnum Mag
- Salmon River Hunter Rail
Please let me know if you have any questions
Optics Sig Kilo 3000 BDX Binos
- By Jetson
- Buy - Sell - Trade
- 3 Replies
Sig Kilo 3000 BDX Range finding Binos. Opened box to make sure they worked, and back they went.
Kept as a backup, but never had to use them. Comes with everything pictured. not sure if it came with operators manual but it can be found on line.
They are basically new other than I opened them and not you. PPFF or Zelle. $735. shipped to you.
thanx for browsing
...Jeff
Kept as a backup, but never had to use them. Comes with everything pictured. not sure if it came with operators manual but it can be found on line.
They are basically new other than I opened them and not you. PPFF or Zelle. $735. shipped to you.
thanx for browsing
...Jeff
Attachments
Accessories Sold - HRD 6mm AW/AX spacer mag kits (4) $185 TYD
- By 2 Shot
- Buy - Sell - Trade
- 0 Replies
