Used Tangent Theta 5-25x56 Gen 3XR reticle. Comes with original box, scope caps, and the little sunshade.

This scope is used and has some scratches and scuffs on the finish, but glass is pristine and it tracks well and holds zero.

I switched to a JTAC reticle, otherwise I'd have no reason to sell this scope.

$3,550 shipped.

Trade considerations: Foundation Centurion + Cash

Selling a new in package TBAC CB 30 cal brake.
$115 shipped firm. PayPal preferred

Will post pic when I get home.

FX Crown mk1 VP .25 600mm, with SaberTactical folding chassis with rear monopod adapter.
Fitted with a 600mm slug liner with DonnyFL FX LDC and UTG Bipod
also includes the original 600mm pellet barrel assembly,
2nd shroud and fittings from slug assembly(the thread adapter had damaged threads when
I received it, still threads in but doesn't fully engage the shrouds threads so I opted not to use it)
1 Magazine and synthetic stock.
Scope, mounts and tripod not included.
Asking $1,050 shipped Cont. USA ***SOLD***

Firedot reticle. 3-15x 44mm MOA. Comes with alumicaps CDS cert still valid. Asking $sold shipped

Selling good condition headspace gauges

7mm PRC - Manson go/no go gauge and Forster field gauge, selling all together $100

22-250 Forster go/no go $60 tyd

6.5 PRC Manson go/no go $60 tyd

Yea, no shit huh ?

It's not a joke either.
You'll see the paperwork for it in these videos.

Login to view embedded media
Login to view embedded media
Not gonna ask what your thoughts are because they should be very obvious.

inexperienced Kestrel user here. Is the Kestrel 5700 worth the $300.00 to upgrade and what is the advantage of upgrading?

WTS

Harris 6-9 Bipod with RRS adaptor. It has been heavily used over the years but is still running strong. Sold

Warne 7912 Lite with ARCA new with one range trip. Sold

Looking for a good, solid case for four hand guns, possibly five, two are full size, two are compact and one is middle of the road size wise. I'm probably going to bring 3-4 mags each and possibly two suppressors if I can figure out the paperwork for that.

I see quite a few offerings on Amazon that look like they'll work and maybe I'm overthinking it but they all seem to have plastic eyelets for the locks instead of some sort of metal reinforcement ring. So easy to just cut through that portion of the case and take off the locks. I'll be flying and yes, I'll be using NON-TSA locks.

Any better offerings out there?

I haven't come across this topic being discussed here so thought I'd start a thread on the subject. I'm personally a skeptic by all means but love a good local ghost story. For me- it's the history that builds up the reason for why an object, room, location, what have you, is 'haunted' because that's usually grounded in some part to factual history.

To start the discussion off- here's a story of my own. Decades ago when I was in High School- local legend surrounded a place called Amity Hall in Duncannon, PA. This building had so many stories surrounding it but from what I remember it was an old fashioned stop for the carriage lines at the time. Apparently being a hotel of sorts then, there was a lot of speculation of why it was shut down many years ago which conveniently checked all of the boxes for a young adolescent's mind of a place that was haunted. A defunct hotel- with murderous stories that alluded to a blood stained room, a ghost of a woman that hated men, locals that rivaled the hillbillies from the Deliverance movie, and even hellhounds that allegedly patrolled the grounds. Many a High School students tried to prove their bravery at that time by stepping foot in that building but apparently the building burnt down about 15-20 years ago.

I reckon that it's not so much the authenticity of 'ghosts' but would imagine that these type of stories perpetuate all across the country if not world and thought it'd make for a good thread sharing those local legends. Any interest?

-LD

Looking for a kahles 1-8 3gr.

Flat dark earth Leupold mk5hd 3.6-18×44 with pr2-mil reticle. Comes with badger ordnance 1.54" 0moa condition one mount, badger accessory ring cap (ARC), and clif rail. Original box, sunshade, and everything as it came from the factory is included. Excellent condition, glass is perfect. Will not seperate. $2100 shipped, no trades please.

Arc M-brace 35mm rings 24mm (0.94”) low. Great condition, just used to with a MK5 for a hunting season. Switched scopes and need to move these rings. Asking $125 shipped.
PM with any questions you may have. Thanks!

I have a Bushnell LMSS with a non tremor Horus reticle which I have gotten good use out of but want to step up the glass. Going to buy the Nightforce CFS and will probably select the mil xt s reticle. They have a tremor 4 version and I am trying to understand why anyone would pick that reticle.

Nightforce cfs

My primary purpose is shot spotting and I think the wind dots will only obscure my view and provide zero useful info. I suppose you could hold at the same dot if the shooter is using a tremor reticle and give them a quicker correction in the same language. “Move 1 dot right and 3 mils up.” Seems overly complicated and I’m too lazy to constantly move and level the spotter. I like to hold the reticle center target because I find shots that miss high don't miss too high and are easier to spot with no reticle in the way while still allowing me to give a correction. I have had no formal training in this but just seems to work best for me.

Am I missing something here? I assume they wouldn’t pay Horus to use this reticle for no reason.

the actress passed away to-day at 79......what knockers

I have a nice set of warne PA rings up for sale. They medium height and 30mm.

$30 shipped for the lower 48. Zelle preferred but will take PP Gift, Venmo or USPSMO.

I purchased these new and used them for mock up (finger tight, never been torqued down) then put back in the box. 35MM tube, 36mm or 1.42” high (perfect if you’re going to run a 3.6-18 MK5 on an AR). $125 shipped, if you need more pics let me know.

Just thought I’d offer a public service announcement on a small clearance issue with a Solus action in a Whiskey 3. And I suppose other KRGs.
I used a Triggertech Special in this build and went to check safety function and realized it was barely engaging. Turns out the safety arm runs into the small shelf in the chassis. It was a simple matter of milling out a small pocket as shown. I’m a jeweler so I had the tools to mill it fairly cleanly but a dremel would take care of it as well.
If you tap the safety a few times to the rear and look at the chassis shelf you’ll see a small white nick where it starts to rub. Just take out 1/4 depth of material from that point to about 1/2 inch rearward and you’re good to go.
1st shot shows the pocket I cut. You can see where it stops in the second photo as opposed to where it should travel to in the 3rd.

Secretary of State for the state of Colorado just admitted that a file “accidentally” posted to a publicly accessible section of the states website contained voter ID passwords and other sensitive information- from August through late October of this year .

A yo r could use said information to register, vote, change passwords or party affiliation. But she maintained that CO remains the “Golden Standard” of election integrity!!!!

Does anybody know where you can purchase the factor Ruger Precision rifles MSR Stock? I’ve searched everywhere online and all over Ruger and can’t seem to find anything to purchase just the buttstock. Any help would be greatly appreciated

N Vision Nox18 for sale, lightly used on a weapon mostly used as a handheld scanner. Comes with 2 - 18650 batteries and carrying case. Warranty end in December of 2025

$4200.00 shipped.
$4000.00
$3750.00 Buyer covers all shipping cost.

At Shot Show 2023, I was informed of an unauthorized domain claiming to be Accuracy International USA.

There is No Accuracy International USA, they are NOT affiliated with AI or its partners.

The domain is accuracyinternationalusa.com so please avoid this site at all costs.

They offer a lot of shady finance options, and Accuracy International Proper has yet to determine if there are any rifles even associated with them. The owner of the domain is listed as Name Silo so no actual company is associated with it.

Again, this company is cybersquatting on the domain in order to draw you away from the real Accuracy International websites.

I have a used but great condition Gen 1 ATX chassis.

Only works with the AI short actions like the AT/AX

Black
Gen 1
Folding
Long bridge

SOLD shipped in the lower 48
Discreet PayPal friends and family