Hodgdon Varget
(2) Sealed 8 pound jugs available - same lot number
Local pickup only - Phoenix metro valley area

$390 each

HS precision made M24 stock. This is an actual unissued M24 stock with the smooth coating. Buttpad has been swapped out to an HS precision marked one. Inlet for sunnyhill bottom metal.

Includes sunnyhill bottom metal. The bottom metal is the same as the M24 BM with the exception that it’s the civilian version with slightly thinner trigger guard. Fits into the stock perfectly.

$800 shipped for the stock and BM. Payment via PayPal, Zelle, Venmo, USPS MO. SOLD

Login to view embedded media
Maven has some of the sexiest looking scopes on the market in terms of build quality, materials, and styling. But don't let a hot body fool you. Like an exotic sports car the Maven RS.4 has serious engineering under the hood.

The RS.4 is Maven's scope for PRS competition or long range Western hunting. It offers many features optimized for long range enthusiasts. Maven offers it in MIL or MOA with a variety of Christmas tree and specialty reticles. I got the CFR-MIL reticle which is similar to the PR2 reticle on the Leupold Mk5.


The turrets are oversized and large diameter to provide quick turns to adjust dope and fine adjustments. The turret have a hidden tool-less locking top to allow the user to reset them. Under the elevation turret you'll find a black metal ring that can be dropped to engage a pin on the turret base to engage a precise zero-stop.


All the nobs and rings turn smoothly. The turrets offer precise tactile clicks that audible. The reticle illumination is powered by a CR2032 coin battery and is split between red and green settings with an off in-between brightness settings. The illumination dial layout is a little unusual with the highest settings in both red and green are on the same side of the dial. Unfortunately it's illumination is only so-so. Only the very central cruciform of the reticle is illuminated with a faint glow on the Christmas tree. The RS.4's brightest isn't noon-day daylight which a liability for certain lighting conditions.


The RS.4 has ED glass which gives it excellent sharpness, clarity, and color balance. Chromatic aberration was greatly minimized in all but the highest contrast conditions. Even in those extreme cases, I noted an orange fringe rather than a purple or green one. The eyebox was a bit unforgiving, even with the magnification dialed down to 10x. At 30x it's very tight, so it's imperative the shooter have a firm and comfortable cheek weld on their rifle.


The RS.4 is a beautifully designed scope with long range shooters in mind. Especially the kind of shooter who step out of their custom Cybertruck wearing their ironed T.A.D. outfits and matching Canadian Goose parka.

ONLINE RETAILERS​

Maven affiliate: https://alnk.to/7X4TGjC
Maven Custom builder (use code: moondog): https://alnk.to/3J6z2Dh
Amazon affiliate: https://amzn.to/3MByMgU

SPECS​

:: Originally posted on my blog https://moondogindustries.com ::

Posting for a friend of mine.
6k for entire package

ATX configured with AXSR stock and bedded

(2) 24” Bartlein 6.5 CM barrels

The one on the rifle has 930 rounds on it. The other one has roughly 400.

(1) 24” Bartlein 6 CM barrel. Roughly 1400 rounds on it so almost burnt out but still performing well.

(1) 20” Proof 308 barrel. 1350 rounds on it.

(4) AI weights

Hoptic 2 round holder

3 magazines FDE and Black

Top forend cover full length

Pic attachment and a 20 moa full length rail

Relocating to Anderson/Greenville area of SC. My current gun club has decent 100/200/300 yard rifle ranges (as well as shotgun/pistol ranges and IDPA style matches). Know of any full featured gun clubs in the Anderson/Greenville area?

Thanks!

This Winchester model 70 was custom built by American Precision Arms ( APA ) who no longer offers complete rifle builds. All of the custom built rifles from APA started around 5K back when they were offered! This model 70 long action is chambered in .300 Win Mag and the action was trued up and blue printed. It was matched with a 22" Schneider A3 heavy barrel that is threaded 5/8-24 tpi so your favorite suppressor will thread on perfectly. The bottom metal is a CDI detachable box magazine style that takes AI magazines for reliable feeding. The rifle comes with one 5 round AI magazine. The stock is a McMillan A5 and the rifle and stock have a custom camo paint job, the Harris bipod is included. Don't let this custom APA Model 70 get away from you.

To purchase this gun, you must message me though the board here or contact me through my web site email:


[email protected]


We must talk via voice to make any arrangement. Do not wire or send any funds without calling the number you receive by contacting me through this site or via the above email. Pay close attention to that email address as scammers make emails that look similar. Our business is in Tulsa Oklahoma, we are in Tulsa Oklahoma, and Our bank is a locally owned bank in Tulsa Oklahoma.


Price:$2750.00

Arken EP-5 GenII 7-35X56 VPR FFP MIL
Comes with original box, front and rear lens caps, throw lever, and bubble level. All in excellent like-new condition.

$575 Shipped PP G&S or Venmo

Good condition. I have 2 sets. Only selling one set.

$90 shipped

I just happen to have a 6mm Bartlein blank and haven't been able to decide on which flavor of 6mm.
I'm sure that someone here has tried necking down 6.5 PRC to 6mm. Any thoughts positive or negative welcome. I have an awesome 6mm Creed I tried search, but no results. Please send link, info or whatever. I am partial to short barrels so 6mm GT etc not really useful. Thank's to any suggestions in advance. I don't mind having a reamer made.

Iowa State and BYU both avoided loss in the last 30 seconds of their games.
Only Texas lost this week. Remaining pool is down to 10.
Both pickers advance.

Post your Week9 picks in this thread. Good luck!

Like the title says, I'm looking for a boyds pro varmint stock for a 10/22. Bull barrel channel. I have some rings, bullets and brass I'd potentially like to work a trade with.

Tract Toric UHD 4.5-30×56 MOA with Vortex Pro 1.1" rings, Vortex Defender caps, and a MK Machine Throw Lever. Comes with 2 sets of turrets. Has original box as well.

Not looking for trades.
$1200 OBO Shipped and insured PP F&F or Venmo

Found this lying around.
New in bag Spuhr A-0041

34mm top front cover
$60 shipped

WTT/WTS factory AI AT 20" 1/10 308 barrel. Has ~500 rounds through it. $600 shipped or trade for a 6mm creed AI barrel.

Today i was loading up rounds for load development for mr AR. I was getting a wide range of OAL from 2.239 to 2.257 loading 77gr otm. I was aming for 2.25. My equipment is a lyman turret press and using a hornady micro adj setting die. The turret is on tight as it can get. Is the difference from the bullets not being all uniform or is it tension when seating. I do anneal my brass as well. Even though its just AR loads I wanna learn as much as i can before i step into the bolt action world and waste potential money. Thanks again for any info.

Sako TRG 22 chambered in 6.5 Creedmoor like new in its factory box. The TRG 22 in 6.5 Creedmoor is no longer in production, making these rifles extremely hard to find. This TRG 22 is the all-black stealth configuration featuring a black stock and bolt with blackened barrel and action. The solid vault-like action is machined from special steel alloy. It has a TRG42.COM 1913 rail on the top of the receiver just waiting for your favorite scope. The sturdy bolt with three locking lugs feeds rounds flawlessly from the centerline of a detachable staggered 2-row magazine. The bolt lift is at a 60° angle for fast bolt throw on secondary shots. Don't let this SAKO TRG 22 get away from you. The rifle has been fired but as you can see in the photos it is great shape and is ready it's next owner and next trip to the range or hunting!


To purchase this gun, you must message me though the board here or contact me through my web site email:


[email protected]


We must talk via voice to make any arrangement. Do not wire or send any funds without calling the number you receive by contacting me through this site or via the above email. Pay close attention to that email address as scammers make emails that look similar. Our business is in Tulsa Oklahoma, I am in Tulsa Oklahoma, and our bank is a locally owned bank in Tulsa Oklahoma.


Price: $2750.00+ shipping

13" Expo Wedgelock rail, no visible wear, lightly rattle canned. Comes with barrel nut, all hardware, and wrench $150

11.7" SLR ION HDX MLOK - F rail. Well used showing some knicks and scratches here and there, still perfectly functional, comes with all hardware, barrel nut, and gas tube alignment piece, $150

Burris Signature Rings, 30mm, 1.0", $40 shipped

Hi all, thanks in advance for any help or insight that can be provided. I inherited this Remington 700 300 Win Mag and would love to know more about it. I am most curious about the barrel and if it is factory or aftermarket. There appear to be some smith markings though I am unfamiliar. The bolt was polished and had 1803 engraved in it. The stock was a McMillan which I could see had the recoil lug bedded.

Please see the photos below of the various markings as well as some measurements of the barrel. I have since had the barreled action cerakoted and it is in a MPA Ultralite chassis now.

The throat seems much deeper then SAAMI. Base to Ogive it likes Berger 210 VLD’s at 2.950-5. ( 10 thousands off the lands.

I have lots of 250 pieces Hornady once fired LRP brass. I have 1500 pieces of 6.5 CM and 1000 pieces 6mm CM. $100 shipped per 250.

How close to the scope body is the field of light coming through the objective lens?

I’m wondering how long a sunshade would have to be to reduce FOV.

Never opened the plastic.

$500 shipped.

So theres an IMUNS up for bid in eBay and a wondering if it’ll work on my AT AICS 2.0

My chassis has the flush cups at the end and not the loops for the sling. The IMUNS in question does not have the threaded holes for the flush cups and only one roll pin hole.

For people with experience installing and using these, can this be used in my chassis or is this for an older model.

See pictures attached

XTR PRO 5.5-30 SCR2 reticle. Used but in great shape. No scratches or dings. $1575 shipped conus only. ARC rings included 24mm height. Venmo or PayPal FF add 3% for non FF, No Trades. I could also do just the scope without the rings for $1475 shipped if needed. Scope only $1400 shipped.

Final price drop. Need it gone. 1250 shipped including rings. 1150 shipped scope only.

It’s my understanding that Tikka barrels generally shoot slower than others. If that’s true, could that at least be a contributing factor to having to put in more elevation than what’s called for in ballistic calibration for a given factory round? I’m fully aware that mv variability can play a role as well. During my “ get acquainted “ period with my 6.5 Creed Super Varmint I’ve had to dial in some elevation over and above that called for in the calculator. Once doped correctly, though, the gun is VERY accurate at 500 yards. Just wish our range was longer.

2 - Remington 700 RH/SA chassis for sale. The prices include shipping and may not come with action screws.

MPA Matrix: $900.00
Comes with side rails and internal weights. Unable to locate mounting hardware for the rails and weights.



Manners PRS-TCS: $1200.00
Doesn’t come with internal weights but includes Sikes Knob. SOLD


Thank you, Felix.