Just today I gathered my SD's for my new build and next weekend I'll be calibrating my true muzzle velocity through my Kestrel 5700. The issue I have, is the data the Kestrel gathered puts my round at the transonic barrier at 1398 yards. I know I am supposed to use a target 15% back from 1398 yards to get my result, but my range only goes out to 1100 yards. If I was to scale back to 1100, or even 1000, will this mess up the inputs and give inaccurate results?

Cartridge: 6mm XC
Bullet: 115gr DTAC
MV: 3026.7
SD: 4.8
Spread: 14.4

Have zeroed two optics with it and ran a couple mags. Right around 200 rds total
FCD Keymo MD and FA
BCM Charging handle
Centurion Bolt, Rail Covers and Handstop
More Specs Listed on Timestamp

Checkout my other Listings

$675 PP F&F Shipping Included

I bought a couple mags for my AI. The 3 round isn’t tall enough to grab the mag release so I need another 7 round instead

This is the double stack WSM magazine

Straight up trade or

$65 shipped

Had this built the end of last year and shot exactly 14 rounds through it. Just don't have time to shoot right now.

ARC CDG action, PVA straight flute barrel, brake, TT diamond, XYLO chassis.

Everything was new with the exception of the chassis when this was built.

$2500 (net) including shipping. No scope or rings. They will be listed separately

Good morning everyone! So i have run into a bit of an odd situation. I am in need of the parts diagram for the SW 5.7 and FPC. While smith says they dont give them out to the public, i am hoping someone on the forums might have the PDFs they can share. Thanks in advance for your help

WTS my Reptilia AUS 34mm with ROF Bridge and ROF 45 rmr. Everything is in great condition. $OLD shipped or will trade for a badger ordnance C1 max 34mm 1.3 height plus cash.

Here’s what’s I have for sell 25 creedmoor rifle chassis is sphur folder with internal and external weights. Action is cutis valor with 26in benchmark barrel 5/8x24 thread at the muzzle with mdt 12 round magazine and trigger tech red diamond single stages. This is a turn key rifle. I have the reloading stuff to include:
1. 200 round of Lapua small rifle brass
2. 400ish 135 Berger hybrid
3. Short action full length sizer .282 neck shoulder bushing .262 mandrel
4. Whidden Mirco seater 6.5 creedmoor
Asking $3800.00 shipped

I would like to commend Trijicon on their great customer service.
I returned a ACOG TA110 for a couple of minor issues (nothing that prevented the scope from working - just me being a bit anal LOL).
I love the scope but knew I would be bothered.
The service team at Trijicon took care of me and I couldn't be happier.
Charles

I started a couple of convo’s with guys in the for sale section. These two guys started convos with me instantly. They have both been reported. Is this common? Haven’t bought anything for awhile.

This is the gun that started it all for me in 1986 in ROTC. I learned 3 Position shooting with this rifle in high school. Those were the days.
These were an Olympic grade pellet rifle in the early 80s and will punch a single hole at 20 meters. Out of nostalgia, I purchased this one when I taught my son to shoot 13 years ago. It functions flawlessly. Piston is still pretty fresh though I haven’t chronographed it. It also includes a new piston cup as well as a few extra front sight inserts. If you are unfamiliar with these, it’s a single shot side lever. .177cal pellet. Designed specifically for 20meter shooting. Weighs about 10lbs
And it’s still a tac driver rifle. Still prints single hole groups if you have it in you.
Rear peep sight is original to the gun.
I ok’d it with my son so we are selling it to fund a new build.
Asking price is $850 shipped. I figured I’d post here before eBay only because I knew this crowd better.
Or WTT for an action. Preferably Origin, but open to others that take readily available prefits. anything that proof sells prefits for. ARC CDG, Defiance etc etc. New or clean Solus. .
Also open to short action REM 700chassis, KRG, Solus, mdt

New never used holds 120 rounds in 3 binders of 308 based caliber shells. $150 125 shipped.

Thanks J

Sherrif calling it an attempt.....could just be a dumbass but I doubt it.

So I have abandoned bolt guns cause I just wanna go fast now, and I am just not into PRS matches anymore I been wanting to do field matches as a second shooter. Cause I wanna go fast.

So I have built 2 gas guns one in 223 and 6 ARC.

Seekins DMRs is in 6 ARC it’s waiting on final assembly

223 Lego build with a bunch of parts.

But I have noticed that the buttstock on the 223 have a good bit on side to side play in it. So I am debating on switching to a fixed stock.

Wanted to ask anyone perspectives on a loose buttstock for a fixed one and if it had issues on POI shifts from zero?

I own a IHC M1 that I purchased from CMP in 2005 that I believe is a LEAD rebuild. The serial number is 4,550,6XX. It has an LMR barrel dated 4-53, and all the major components (Bolt, trigger housing, op rod, hammer, gas plug, etc.) are IHC marked. The stock has a circle "P" in front of the pistol grip and the number "3162" in the barrel channel. While this rifle has a postage stamp style receiver marking that reads "U.S. RIFLE / CAL. 30M1 / INTERNATIONAL / HARVESTER/ 45506XX", the side of the receiver is marked "D6528291-E" and "LEAD 10-64".

From what I can find, receiver drawing number D6528291-“E” was assigned to HRA rifles.

Has anyone ever come across a IHC receiver marked like mine?

Like the title says - I’ve been co tacted on work and private phone and email to vote absentee in FL. I live in MI .
The last one today even listed my supposed FL address and a sample ballot .

Against my base instincts I did call my county Sheriff to report multi state voter fraud and probable identity theft.
We all know the answer to that call- absolutely nothing they can do about it .

Anyone else been getting these - not just random spam /junk but things with your “supposed “ address and an application to vote in another state ?

Facebook wouldn't let me post it because it went against their 'standards.'

It was that good..

Login to view embedded media

So here's something I've never seen before.

Was dialing in a new load for an MR762 I've had for ages, using 178 ELD-X with Varget, and got this repeatable situation where the first shot in every 8-shot string was consistently low. I only brought one mag to the range, so this is the same mag loading only one string at a time. My first thought initially was it was a strong cold bore offset, but after I loaded the second string, it repeated, and then the next.

Maybe it's the mag doing something to the first cartridge? But still, isn't that weird?

Just got this email that it released and available. Looks like they cleaned up the glass to address the recurring issue. Interested in seeing what the new coloring is if anyone gets their hands on a pair

Flying into Austin last week and noticed this piece of land with distinctive fence line.

Is it a hunting ground?

New never used. 3 binders for long action calibers.
$150 125 shipped
Thanks J

I did some research on this, before I found this video, and this lines up exactly with 40% of our M2 money supply being pumped into the economy, mostly thanks to Kamala's tie-breaking vote.

By the end of 2020, M2 had increased by 25% over pre-pandemic levels. By 2021, it was nearly 40% higher. So that 40% figure matches M2 growth pretty well.

People will argue that the Consumer Price Index (CPI) from 2019 to mid-2023 shows a cumulative inflation rate of around 20-25%, depending on the source. But if you look at the true cost of living, it's actually just over 40%.

The really bad news is we're triple fucked: not only have prices gone up, but we're taxed based on inflation while wages remain stagnant.

And the fact that these liberal white women working for tips don’t actually care that Trump wants to make their tips tax-free— actually blows my mind: they just want abortions, which is ridiculous because it's a states' rights issue. Trump has never really taken a strong stance in the anti-abortion fight and has even declined to endorse a full ban.

And honestly, when you think about it, a billionaire playboy should be in favor of it—but I’ll never accuse liberal white women of thinking.

Login to view embedded media

Thanks to RTH1800 I got the right Unertl bases and finally had some time to fit the scope!

Bore sighted it at about 200 and hopefully will fire this week to dial in.

It’s a .220 Swift. So not a big caliber. But barrel is like new. And pretty sure it will shoot bugholes with a bit of dialing in Some handloads.

Got to find a way to display this with my ‘52.

They are like peas and carrots!!!!












Not many off the rack rifles more beautiful than a Pre-64 Model 70!! This example from 1951 and pretty minty. Mostly just rack wear.

Cheers and thanks again RTH!

Sirhr

Redding Ti Titanium Nitride bushing, brand new - .265
$20 shipped