About to start my first somewhat involved project - taking a proof barrel off a savage 110 ultralight and putting it on an ARC coup de grace action. It’s a bit different because the savage take-off has a barrel nut instead of being a shouldered pre-fit. Here’s what I think I need to do. Any comments?

1. Put the savage barreled action into a Wheeler Action Wrench #2, clamped in a vice
2. Use a Wheeler Barrel Nut Wrench to remove the barrel nut
3. Unscrew the barrel (wondering how hard this will be, does savage lock-tite these in?)
4. Clean gunk off the threads and put some sort of anti-seize on there (recommendations?)
5. Remove the firing pin from the ARC bolt.
6. Loosely screw the savage barrel into the ARC action.
7. Put a go gauge in ARC chamber and close the bolt. Screw the barrel down until it bumps the go guage then back off a tiny bit. Check it with the no-go.
8. Once my headspace is good, put one end of the ARC action wrench in the action, and secure the other end in a vice.
9. Use the barrel nut wrench to torque the barrel nut down to 100 foot-lbs spec’d by ARC (not the 50 ft-lbs typical for savage)
10. Check again with the go and no-go gauges. If it clears, you’re good to go.

Kimber 82G Single shot .22lr purchased from CMP. Beautiful wood, comes with box, paperwork, EGW scope mount, front and rear iron sight. I have never fired this rifle. shipped

In as new condition only used for a couple range sessions. Decided to go a different route, will include foundation full length arca rail and Hawkins M5 DBM.

$1300 shipped
PP F&F

2 sets of Autotrickler V3 with Area 419 upgrade for sale, $450 each shipped.

Set #1 SOLD


Set #2 SOLD

Up for sale is a brand new in box Accutac BR4 G2 with a picatinny mount. This bipod is brand new and hasn't even been mounted on a rifle. Reason for selling is the project this was allocated to isn't going to happen any time soon unfortunately.

Price is $240 shipped OBO in the lower 48. I'm open to offers so feel free to send them! Worst I can say is no. Iprefer to deal in Zelle or Paypal.

My iPhone shooter app will not download local atmospheric conditions. Any help out there?

Great condition Panerai sub in 42mm. Very little wear time. It was purchased from crown and caliber. It come with box and accessories but no paperwork. I found another I’d like to pick up and moving this one would seal the deal. If you need any other pictures or info just shoot me a message. Not really looking for any trades. 5000$ shipped and insured. I have it registered through Panerai also, I think the limited extended limited warranty ends 11/09/29.

Thanks

Brett

LabRadar with soft case and stand. 250 shipped PP F&F

Spikes Tactical complete rifle
16in upper
Geissele Trigger
CRR ARCA/Mlok forend
R2 muzzle brake
Flip up irons
1500 OBO PP F&F
FFL must accept from individual

Nightforce ATACR Tremor 3
7-35
FDE

Comes with everything as new.(sunshade, windage ring, throw lever)

Mounted in a SPUHR mount on an AXSR.

$2950 shipped and insured or best offer

Not looking for any trades, thank you.

Old school AWT (Applied Weapons Technologies) chassis anodized OD green. These have been gone a long time. Be the cool guy at your next competition. I love this chassis but have moved toward Manners stocks. R700 SA with NV bridge and rear monopod. Takes 10rd mags, 5 is too short. Would prefer to trade but would sell for $1500 shipped. It's in excellent condition. R700 not included but could be worked into a deal. R700 trued and rebarreled by Shark Precision. Other side looks just as good.

Would trade for: + | - cash
Razor Gen 2 - Mils
Impact 737 action
ARC - Coup De Gras
Impact or Origin prefits - Mostly looking for 6bra or 6.5 Creed but will entertain others
Vudoo 360
ACC elite

Manners PRS-TCS gap camo 419 rail with brass weights. No Sikes rail. I have a long trader history on LRH. Going to post over there as well.
$1150 shipped

AT-X Long Bridge , original FDE painted Alumnahyde Matte Black
SOLD $180 shipped SOLD

AT-X Short Bridge Black .
Sold $180 shipped
Payment via Zelle or PayPal
Sold sold

Great condition, like new, no box $750 shipped.

Selling a 2014 full kit UTMx 640 (60z)

Includes cables and Wilcox flip to side.
The Image is better than a Voodoo-S, the unit is in good working condition. Released from a private security company.

$6250 shipped to your door fully ensured.

Looking for a pair of match pro binos and an sig 3k lrf that will work with kestrel. Let me know what you have.

Custom-built 6mm ARC gasser, all top quality components with little use on them. 16" barrel makes for a great, nimble build with or without a suppressor. Consistent hits on small plate at 1,000yds with factory ammo, even with the relatively short barrel. Sub-MOA at 100. This thing is awesome and a lot of fun to shoot and reload for, just thinning the herd and the cartridge count. Loads of spare and accessory parts included.

Rifle Specs

• Seekins SP223 gen2 lower
• Seekins IRMT-3 upper
• Seekins SPR-3 12” Rail
• Proof Research 16” SS barrel, round count ~300
• Superlative Arms .750 adjustable gas block (set screw model)
• Spike's Tactical melonite rifle-length gas tube
• Rubber City Armory 6.5 Grendel BCG
• Radian Arms Raptor charging handle (ambi)
• Triggertech Duty 2-stage, 3.5lb pull, curved shoe trigger
• JP silent captured spring
• Magpul PRS lite stock
• Aero Precision carbine length buffer tube
• Aero Precision end plate/castle nut
• Seekins lower parts kit w/ ambi safety selector
• LaRue Tactical A-PEG Grip

Parts/Tools

• 12" ARCA rail (keymod)
• RRS 2.5" ARCA rail (keymod)
• BCM 3" Picatinny rail section (keymod)
• New/unfired complete 6mmARC bolt assembly from Maxim Firearms
  • https://www.maximfirearms.com/online-store/complete-6-5-grendel-bolt/
• Manson Go and No-go gauges for 6MM ARC
• Mags (one each of the following, 10-15 rounders):
  • Amend2
  • ASC
  • Duramag
  • AR Stoner

$2150 $1925 shipped for everything
PayPal F&F with no notes or Venmo, will ship FFL to FFL

DM me if interested, thanks!

Issue: All three shot groups have a flyer (3rd shot). The first two shots from all groups are always right next to each other. One group in particular had the first two shots in the same hole. Each group consists of 3 shots. I'll be using the rifle mainly for long-range hunting (100-600 yds) and sometimes target shooting to 1K. All cases were NOT trimmed as it is still under the maximum chamber length (2.0655"). No pressure signs on all of the groups shot. The reloading recipe I'm using is from Nosler. The maximum power grains is 46.0 but I'm still way below that. Their recommended powder charge is 44.0 for the most accurate load. The case length in their recipe is 2.036". I'm using my chamber length as a guide vs their recipe.

Group 1: The first two shots (B1 & B2) were the same hole. 3rd (B3) shot was 0.47" center to center.

Powder Grains: 42.0

Group 2: 1st and 2nd (B1 & B2)shot are 0.20" center to center. 3rd (B3) shot was 1.49" away.

Powder Grains: 42.5

Group 3: 1st 7 2nd shot was the same hole (B1 & B2). 3rd shot was 1.3" away.

Powder Grains: 43.0

I shot 9 rounds which is the first load I created for my Tikka 260 Rem on a Manners Stock EH1TK (with mini-chassis) and Benchmark barrel. I'm using Forster Coax Press and RCBS dies. Here are the details of my components.

Case: Hornady, once fired
FL Sized: Yes
Chamfered & Deburred: Yes
Shoulder Bump: 002"
Primer: Remington 9 1/2 Large Rifle
Bullet:142 gr Nosler ABLR Spitzer
Powder: H4831SC

Barrel Length: 24"
Barrel Twist: 1:8
Contour: Light Palma

Atmospheric Condition:
Temp = 75F
Wind Direction = 6 O'Clock
Wind Speed = 7.3 MPH
Wind Gust = 12 MPH
Air Pressure = 29.96 inHg
Relative Humidity = 50%

Shooting Distance: 100 yards
Rifle has a bipod and I load it when shooting. I use an ear bag for vertical adjustments.

Used Magnetospeed with bayo firmly attached to the barrel.

Case Dimensions (Length): Difference max out at 0.005"

Case Dimensions (Neck): Only two cases had neck diameters greater than 0.002". C4 -> rookie mistake; probably wrote the first reading wrong.

Bullet Dimensions:

Some primers are deeper. COAL is within 0.005" difference. Base to Ogive has a 0.003"max difference.

Bullet Velocity:

Please note that Case Identifiers match up with Bullet Identifiers ie. B1 is using C1. What is causing the flyers? I can shoot up to 600 yards with my 6.5 CM (Sako TRG 22) and group a shot at 2".

CameraLandNY was hacked

Don’t trust communications until we give the all clear.

Don’t assume anything

For Sale:

XLR Industries Atom chassis for a Remington 700 short action, or clone. Chassis is anodized black. Chassis was briefly on a 700CP, but went to the factory chassis (the XLR is much lighter). Threads for the grip screw look a little messed up, but they function fine. Chassis is in great shape with a few nicks/scuffs from normal use (see pictures.) Comes with the action screws (not pictured).

$320 shipped to the lower 48

Listed on other sites.

US sales only.

Looking to buy an XLR Element 4.0 MG 700 SA chassis. Just the chassis. Don’t need a buttstock, weights, or grip or any accessories. Let me know what you have. Color doesn’t matter.

Howdy! Please recommend me some good shot timers. The only ones I know of are:
1. Pact club 3
2. AMG commander (always on back order)

I am also looking for a med trauma kit to go on my Kore belt setup. Please recommend one.

Thanks,
SS

I have 2 of the new L3i billet mags
1 was opened to test fit, but they've never been loaded or used

I'd just like to get what I paid for the pair- 300 shipped via venmo, zelle or PPFF

A while back, I decided that I wanted to go with barrels that would stand up to hard use a bit better than the run of the mill Ballistic Advantage or Roscoe type barrels and decided to go with Criterion.

I went with a 14.5 Core to run with a 10x scope, a 13.9 Core to run with an ACOG and a 12.5 Hybrid to run with a red dot and suppressed. The 12.5 gets the hardest use.

I don't handload anymore and when hunting for ammo, I look for a bang for the buck. I've run 77gr Razor Core, AAC 77gr and some other upper quality heavy rounds. I've also run 55gr V-Max from Black Dot Ammo, AAC 55gr V-Max, ADI 55gr Blitzking, etc.

The best all three barrels will do for me when running the heavier stuff is about 2 MOA. When running the lighter stuff, shooting MOA or better is easy. I can get 2.5 MOA with good M193 and M855.

Is this a characteristic of Criterion barrels or did I just manage to get three barrels that act the same way?