Selling a Tract Toric ELR 34mm 4.5-30x56 MRAD. Comes with Seekins rings, bubble level, MKM Machining power throw lever and butler creek flip up caps. Will come in original box with sun shade as well. the zero stop is already installed and it super easy to adjust for your own rifle.

This scope has been great but I no longer need it. It is every bit as clear as my Leupold Mark 5, and tracks just as well.

No cosmetic wear whatsoever.

1200.00 Local pick up in Heber, UT
1250.00 Shipped

Used strike without warning TMB
6.5 caliber
Stainless with cerakote
5/8-24
Install wrench included

The brake is hard on the cerakote, you will see in the photo there is several layers of cerakote applied. I would touch up the coating couple times a year.

This has had the lock nut collar machined down so it will work on any size barrel. No need to have your 1.25 straight contoured down with the TMb with this setup. The tuner portion no longer functions. This also lightens the weight for NRL hunter.

$215 shipped pp ff or Venmo

SOLD

Up for consideration is some good parts collecting dust in my gun closet. If interested in anything shoot me a DM.These will be cross listed on multiple sites. Time stamped PMs gets first dibs.

Harris BRMS bipod with KMW pod lock
-$100 *****SOLD*****

ADM AD-170-S QD mount
This is brand new in the box never broke the seal. Accidentally ordered too many.
-$75 *******SOLD******

Hope I’m in the right forum to put this out there!

I’m in DFW area and am wondering if anyone would be willing to rent me their go/no go headspace gauges for a 300PRC. Need to check the headspace on a pre-fit proof!

Just picked up a Barrett M82A1 gen 3 razor 6-36x56 looking for one piece scope mount any suggestions on height and brand. I would like to have at least 1/4 between scope flip caps and forearm. I have Steiner high now but I prefer 1 piece mount.

So over the past 5 years, the UK Government has decimated the Gurkha Regiments. They are down to 1 from, I think, 5. This is a massive hit to the men of Nepal. But also to their traditional Kukri makers.

A real Kukri is less than $100 delivered....

This helps folks eat. It preserves a craft. And the knives are gorgeous. See it done.

Login to view embedded media
Now think about getting yourself a cool stocking stuffer. A great all around knife. And an amazing piece of history.


Not affiliated with this company. Getting nothing. But I have one that I ordered several years ago and they were outstanding. And I think the Gurkhas are amazing, lethal warriors whose traditions are inspirational. Maybe someday, the weenie UK will realize how much these warriors matter. But until then, they are going to be adrift. And for what a few boxes of ammo cost, you can have a piece of history and maybe help keep a factory running.

Send a Merry Christmas to some hard workers!

Sirhr

Hey all, I have a Zeiss LRP S5 3.6-18x50 up for sale. I have been using this optic for a full two seasons and wanna switch it up. Scope comes with the original box and manual and is the mil (zf-mri) reticle. Scope also has the objective tenebraex cap and I lost the ocular side, I have a replacement on order for the buyer. As far as the scope goes, it just works, I've had zero issues with the functionality, glass is perfect. It has typical ring marks and a small ding on the objective bell and some marks on the elevation turret. I'd be happy to post extra photos if anyone would like.

Asking $2K shipped, PP/Zelle, no trades at this time.

Thank you!

Hello all, I have some minor repairs to do post hurricane Beryl so I am cleaning out some stuff which has just been sitting.

I have the following up for grabs. All prices are shipped and payment via Zelle or PayPal F&F only.

Area 419 Zero Press Hybrid Turret- $200, now $185-SOLD
Giraud 6x47 L case holder- $35, now $30
Giraud .223 AI cutter and case holder- $85, now $80
Giraud 6.5 CM cutter and case holder- $85, now $80, SOLD

Local pickup in the Houston area is possible, just let me know.

***Edit: 5/23 - I am returning the holster. Price is now $2100 shipped for pistol and plate. The holster is NO longer available in the deal.

I have a “like new” Staccato C2 DPO. I purchased this new from Dawson Precision on 5/1/2024 (2 weeks ago). I put about 60 rounds through it. I’ve decided to keep my S2 Compact. I also bought a new Tenicore Certum3 holster at the same time. It has not been used. I have not carried this pistol in the 2wks that I’ve had it. It also has a plate from Dawson for Holosun 507C/Comp/508T (and whatever else has the same footprint). Pistol comes everything it shipped with. Mags, paperwork, t-shirt (unworn), soft case, etc…

***Optic not included in the price.

Selling it all (pistol & plate) for $2100 shipped to your FFL. I will not split it up.

I can post pics later tonight when I get home.

NIGHTFORCE ATACR – 4-16x42mm F1 MOAR F1 (C542)

100% Like New without scratches or damage to the optic or lenses. It was mounted but unfired. Changing to MIL-XT reticle.

Purchased from Scopelist.com

$1750 Shipped!

If you have any questions let me know!

Thank you!

These rifles are pure trash. Against my better judgement I bought a new B14 Sierra Wilderness in 7PRC after already having been burned 2 times by rifles of theirs that shot like crap out of the box (including a premier).

The first trip to the range right out of the box it was shooting roughly 4-6” groups with all three types of Hornady factory ammo. I started with a barrel that I had cleaned at home prior to the range trip and did a break in since factory barrels are known to be rough. Even during the break in and cleaning the barrel frequently the groups were a whole hell of a lot larger than you’d ever expect to see.

Everything was checked for torque, I pulled that optic off of the rifle and put it on my PH2 6.5CM and confirmed there wasn’t an issue with it and put the optic from my PH2 on the Bergara with the same result. Also tried different torque settings on the action screws other than their 55inlbs spec going to 65 on both and also lightening the rear. I also pulled the barreled action out of the chassis where I saw a lot of heavy overspray from their panting process and proceeded to sand the thick webbing spots down at the range. Nothing I did changed the result.

After 60 rounds the rifle was still shooting like absolute dog shit and copper fouling like crazy. I called Bergara on the way home from the range and got an RMA to send it in.

At home I inspected the rifle where I noticed the absolute terrible bolt lug contact and thought that might be causing an issue as well so I noted that when I sent it in.

Bergara inspected the rifle, recrowned it and said it shot a .9” and .6” group with Terminal Ascent 170gr and sent it back out. They didn’t address the bolt lug contact issue or the issue with the hinge pin on the floorplate of the bottom metal falling out of one side of the hinge due to the pin either being too short or the relief being too wide and their “gunsmith” said was in spec.

I was hopeful it would shoot as I do generally like the rifle and it has improved but it still shoots like complete ass. I even bedded the stock since it was showing signs of a bedding issue and Bergara fucked up the paint in the inlet while they had it which uncovered how uneven and thick the paint was in places. The bedding seemed to have made a difference because the erratic flyers are gone and it’s just shooting large triangle type 3 shot groups now… for the most part.

I got frustrated at the range after group after group being 1.5-2MOA with every ammo type include the Terminal Ascent they recommended for another 50-60 rounds or so. I had cleaned the copper mine yet again with bore tech eliminator which is quite the process due to how badly it fouls and decided I was just going to put some rounds through it to try to smooth it out in 10 round strings. So I shot the first two 3 shot groups back to back and they were… large. Loaded up another 3 and it stacked them sub .5moa… no shit. So I shot a 4th and it put it right in there. At this point I’m thinking this thing is starting to shoot and get excited. I shot another 3 shot group with the barrel super hot with was also very good.

So I let it cool completely and shot another 3 shot group… back to dog shit. WTF? I cleaned it again and shot two more 3 shot groups with the same result. I was done wasting ammo so I put it away. I was thinking the barrel might have a stress relieving issue based on this and texted another hide member what had happened and he said the same thing.

I also brought my Seekins Element 7mm PRC to the range and shot them side by side and all of the ammo shot exceptional in the Seekins, so I know it’s not an issue with the ammo or an issue with recoil. Despite the Seekins being nearly 3lbs lighter as configured it still didn’t manage a group larger than 3/4moa, even the 8 shot group I fired in 1.5min trying to mimic barrel heat over a NRLH stage.

So here we are yet again, I called Bergara again and they said they’ll issue another RMA and look at it again but won’t test fire it. I feel like that’s a waste of my time when I’ve already gone down that road with negative results so I have zero faith in a positive outcome from that nor do I wish to waste any more time or ammo verifying the rifle when it comes back. I proposed that they either 1. Accept the rifle back and issue a full refund of my purchase price or 2. Agree to rebarrel the rifle so that I can send it down the road with some level of confidence that whoever bought it might get a decent rifle. They denied both.

I’ve followed up with the same documentation of my results in an email as well as my proposal. I doubt anything will come of it so my next step will be to send it to a gunsmith next week for a third party evaluation and I’ll then just take legal action and seek the cost of the rifle, inspection fees, as well as the ammo I’ve wasted on this piece of crap.

So my advice, buy a rifle from just about any other rifle manufacturer.

I’ll update this later tonight or tomorrow with some pictures as well as update it with third party findings or any resolution from Bergara.

Jews being chased down the street by other Democrats.

And yet they'll continue to vote Democrat in Nov.

We have this beautiful 7PRC Shinobi rifle with a two tone custom Cerakote job on the barrel and stock. Click this Link to purchase the rifle.

4 spacers. $30 shipped

$1400 US Posted
Leupold MK4 LRT 3.5-10x40 FDE M2 turrets , Illuminated TMR reticle, 30mm tube.

Overall in excellent condition , it does have ring marks but they are just surface discolouration and not indented .
Lenses are excellent .

Scope is located in Australia. I have sent numerous scope to the USA with no issues , post is fully tracked .

Price $1400 USD posted .

Payment via PayPal F&F or of needed I can try to sort out Venmo.

I have once fired Hornady 6Creedmoor brass for sale. Its large primer, fired in a saami minimum chamber headspaced to go-gauge +.002”
All fired in my rifle, all factory Hornady ammo.
Primers still in, needs to be deprimed.


The 6GT is smaller primer GAP/Hornady brass, also 1x fired in one of my rifles.
I have 180 pieces of 6GT.
Asking $90 shipped for the 6GT brass.


$30 per 100 pieces, *plus shipping(*if getting less than 400 pieces).
If you buy 400 pieces or more of the 6creed brass I can cover shipping.

I have about 1800 pieces of the 6creedmoor brass to sell.

It all ships in its factory Hornady ammo boxes(inside a larger box).

Thanks very much

Feel free to text me for faster communication. 4804678090

Any of you guys into dirtbikes? I’m looking at getting my 12yr old son his first bike. He was on a friends farm last week and picked it up pretty quick on a small pit bike. I could use some guidance though and have a a lot of questions.

Forster Co-AX bench priming tool. includes primer tube loader tray. Seats small and large primers without need of any shell holders. SOLD

Excellent condition very little use.
See photos for specs

$125 shipped to lower 48

Like new Daniel defense complete lower with geissele SSA-E trigger and radian safety selector. Only 20 rounds on it.

$650 shipped to your ffl

What I Have:

30mm warn mount
34mm Bobro qd mount
36mm mpa mount
36mm ARC mbrace


I also have some 30mm mdt Elite rings I could trade.



What I want:

I am now only looking for 34mm mount-1.5"- non qd, and on the lighter end of things. I'd be open to other similar options or mounts just not really wanting anything super heavy.

Thanks

Bit of rust on the screws from rainy matches. $80 shipped please buy these.

Selling a Nightforce NX8 2.5-20 Mil-XT FDE scope. Comes with NF A682 1.54” 20moa mount and NF Rap-I diving board. Everything is in good condition, no issues.

$2000 shipped. PayPal FF preferred.

Apparently CBS stories must be approved by the “Race & Culture” unit.


I swear the west is falling further & further into the pit of asshatery every day.

Hello,

I live in France and am in the market for a first pair of night vision binoculars.
I know we have an IIT tube manufacturer in Brives la Gaillarde called Photonis they produce gen 2+ tubes.
I want to buy my first pair of night vision binoculars with 4G in the US or 4G+ tubes in Europe.
Ideally, I want to use them in a deep forest environment for wildlife observation and counting.
Must I go for a high gain, low EBI, and high-resolution tube?
I've seen their PD-PRO-16B Binocular NVG sold in the US and they interest me.
Do they sell it in Europe?
If I want a good pair of matched tubes with at least 2800 FoM what prices can I expect?
I can spend around 20K€ for a complete unit with manual gain paired with a cheap COTI like a Jerry CE5.

Warm regards and greetings from France.