Makes sense. Thank you! I know both brands are reputable. I am going to go with PR then.
Who makes this bipod and attachment?My AWM with a GAP chambered 300wm bartlein. Before and after paint.
Sent from my SM-N910T using Tapatalk
My buddy finally listened and bought a accuracy obsession / vision chassis for his AX.
So helped him with the install. Here is a couple pics
So helped him with the install. Here is a couple pics
Attachments
The link will give you all the official info.
But if your shooting prs style comps with a AI it’s the way to go.
Longer forend with full length arca. Lower center of gravity. The ability to get closer to the magwel with the lower center of
Gravity.
And of course it looks good. Lol
Because an AI in stock form [for PRS style competitions] is hot garbage... And it looks good.
Got it. But I always feel the stock AX looks pretty good too.
The link will give you all the official info.
But if your shooting prs style comps with a AI it’s the way to go.
Longer forend with full length arca. Lower center of gravity. The ability to get closer to the magwel with the lower center of
Gravity.
And of course it looks good. Lol
Well to be honest it is the best looking AI
This is a fact and the only reason I bought an AX. though thumbhole AT's are
Has anyone done a thumbhole AX? I realize it'd be kind of a step backwards, but it would certainly be unique!
I thought one of you fools had tried it fairly recently... Tough to keep you all separate.
Dope! That is the second-best looking AI... Second only to a thumbhole AO, haha!
Dope! That is the second-best looking AI... Second only to a thumbhole AO, haha!
That’s hands down my favorite AI in this thread so far
Nailing some steel today from improvised positions in the field at 575, 600, 650 and 730 meters. 1st round impact on all of them.
He pulled it before I could even click on the buy now button. Fucking tease!@Krob95
Yours is nice to. But you tried to abandon it in the px…..You loose points for attempting that
Thumbhole AO is Good Lookin…
Thumbhole AX is More Goodest Lookin.
Hey, for an AX, how does that RRS Arca grip replacement block feel to your hands when you grab it and carry the rifle?
I bought the Sawtooth version because it looks way cooler, but damn it hurts to grab and actually carry the gun. The RRS design looks like it would sort of semi-shield one’s hand from the sharpish Arca bits.
The rrs is way better to hold than the sawtooth one... However it is still a big square block with the endges are rounded really smooth...
Damnit, now might have to light some more $100 bills on fire lol
waaaaahhhhhhh!But yes, my widdle tiny soft baby hands were hurt by that big bad thing!
Looks 20x better though.
If it had been designed so there was material that overhung the Arca angles, it would’ve been tits. That way my Skin-So-Soft™ mitts would rest upon the overhang and not on 45° metal angles.
I assume that’s why the RRS is more comfy.
But yes, my widdle tiny soft baby hands were hurt by that big bad thing!
Looks 20x better though.
If it had been designed so there was material that overhung the Arca angles, it would’ve been tits. That way my Skin-So-Soft™ mitts would rest upon the overhang and not on 45° metal angles.
I assume that’s why the RRS is more comfy.
Comp guys where taking the plastic forend grip/ RRS plate from the AX/ AXMC/ AICS AX, to have a 'flatter' surface of contact (with forend), when rifle was placed on a bag while shooting off a prop.
The Sawtooth dovetail is able blend in, while still giving guys a tripod mounting point, maintaining a low profile, 'flatter' surface of contact.
Pic showing rifles/ chassis without plastic forend grip
But yeah man, the design ain't for everyone. I mean, people work out with gloves... so, not much different. lol
Well if you need the RRS aux plate, I know a guy that has one that he will probably never use again
But yes, my widdle tiny soft baby hands were hurt by that big bad thing!
Looks 20x better though.
If it had been designed so there was material that overhung the Arca angles, it would’ve been tits. That way my Skin-So-Soft™ mitts would rest upon the overhang and not on 45° metal angles.
I assume that’s why the RRS is more comfy.
I get it, there’s always workarounds. But let’s design it right from the start. I suggest Sawtooth add those overhangs, plastic for cold weather (like the other hand-touching bits AI made).
Like this (red):
Yeah that would have made a huge difference. When I had my AX I went back to the RSS from the Dependabilt just because of this.
Needs to be in the shape of an erect cock and balls to match the mounting system of the forearm. Some nice Feng Shui that would tie it all together.
Lol.
So how are you gripping the rifle when you carry it?
I just picked up my obese 6.5PRC setup. And the only issue I saw when trying to carry that fat b* with 1 hand was, when I tried to have my whole palm underneath the dovetail plate.
How I carry it, is with my palm on the side of the plate, fingers wrapped underneath the plate and onto the other side.
Pic to give you an idea
Again, I don’t have an issue with it, you do. The product isn’t going to satisfy everyone.
But I’ll let him know…
So, grip the rifle on the Sawtooth, like in that pic you posted. Then level out the gun to be parallel to the ground. Walk with it one-handed for 50-100yards. That’s what I’m talking about.
Perhaps your real name is Magnus von Magnusson and you are The World’s Strongest (& Toughest) Man, but hey, the Sawtooth hurts me.
It’s a military rifle, not a PRS space gun. Non-PRS guys tend to carry their rifles in the field, and there’s a very good reason the weak-side OEM grip is a) plastic and b) doesn’t hurt one’s hand.
My suggestion is merely to to keep some of the functionally of the OEM grip (that went through a bunch of military testing) while adding the Arca. RRS used a metal overhang, but they also made the gun a bit uglier.
I’m sorry to even mention it?
Last edited:
As most things in life, results boil down to the user. Neither design is wrong so i would put a glove on or run the RRS
I have an AX and i run a non nitride Sawtooth which in theory should be even sharper and ive never had an issue with bare handing it, hot or cold.
I have an AX and i run a non nitride Sawtooth which in theory should be even sharper and ive never had an issue with bare handing it, hot or cold.
Attachments
Does your finger with those gloves on even fit in the trigger guard?
